Commenced in January 2007
Frequency: Monthly
Edition: International
Paper Count: 30184
Prediction of Temperature Distribution during Drilling Process Using Artificial Neural Network

Authors: Ali Reza Tahavvor, Saeed Hosseini, Nazli Jowkar, Afshin Karimzadeh Fard

Abstract:

Experimental & numeral study of temperature distribution during milling process, is important in milling quality and tools life aspects. In the present study the milling cross-section temperature is determined by using Artificial Neural Networks (ANN) according to the temperature of certain points of the work piece and the point specifications and the milling rotational speed of the blade. In the present work, at first three-dimensional model of the work piece is provided and then by using the Computational Heat Transfer (CHT) simulations, temperature in different nods of the work piece are specified in steady-state conditions. Results obtained from CHT are used for training and testing the ANN approach. Using reverse engineering and setting the desired x, y, z and the milling rotational speed of the blade as input data to the network, the milling surface temperature determined by neural network is presented as output data. The desired points temperature for different milling blade rotational speed are obtained experimentally and by extrapolation method for the milling surface temperature is obtained and a comparison is performed among the soft programming ANN, CHT results and experimental data and it is observed that ANN soft programming code can be used more efficiently to determine the temperature in a milling process.

Keywords: Milling process, rotational speed, Artificial Neural Networks, temperature.

Digital Object Identifier (DOI): doi.org/10.5281/zenodo.1099814

Procedia APA BibTeX Chicago EndNote Harvard JSON MLA RIS XML ISO 690 PDF Downloads 1962

References:


[1] S. A. Kalogirou, Applications of artificial neural-networks for energy systems, applied Energy. 67 (2000) 17-35.
[2] Salehi, J., Zadeh, P. M. & Mirshams, M. Collaborative optimization of remote sensing small satellite mission using genetic algorithms. Iranian Journal of Science and Technology. Transactions of Mechanical Engineering, Vol. 36, pp. 117-128, 2010.
[3] Mousavi, S. A., Hashempour, M., Sadeghi, M., Petrofsky, J. S. & Prowse, M. A. A fuzzy logic control system for the Rotary dental instruments. Iranian Journal of Science & Technology, Transaction B: Engineering, Vol. 34, pp. 539-551, 2010.
[4] Su-Bin Joo, Seung Eel Oh, Taeyong Sim, Hyunggun Kim, Chang Hyun Choi, Hyeran Koo, Joung Hwan Mun, Prediction of gait speed from plantar pressure using artificial neural networks, Expert Systems with Applications, Volume 41, Issue 16, Pages 7398-7405, 15 November 2014.
[5] A. R. Tahavvor and S. Sepehrinia, prediction of the temperature of the hole during the drilling process, IJST, Transactions of Mechanical Engineering, Vol. 38, No. M1+, pp 269-274, 2014.
[6] Ali Reza Tahavvor, Yasser Rezaei and Ahmad Afsari, Prediction of Cross-Section Temperature During Milling Process Using Artificial Neural Networks, World Applied Sciences Journal 19 (11): 1674-1680, 2012.
[7] Babur Ozcelik, Eyup Bagci, Experimental and numerical studies on the determination of twist drill temperature in dry drilling: A new approach, Materials & Design, Volume 27, Issue 10, Pages 920-927, 2006.
[8] F. Kahramani and A. Sagbas, An Investigation of the Effect of Heat Treatment Oon Surface Roughness in Machining by using Statistical Analysis, Iranian Journal of Science & Technology, Transaction B: Engineering, Vol. 34, No. B5, pp 591-595, 2010.
[9] Kuang-Hua Fuh, Wen-Chou Chen, Ping-Wen Liang, Temperature rise in twist drills with a finite element approach, International Communications in Heat and Mass Transfer, Volume 21, Issue 3, Pages 345-358, May–June 1994.
[10] Jian Wu, Rong Di Han, A new approach to predicting the maximum temperature in dry drilling based on a finite element model, Journal of Manufacturing Processes, Volume 11, Issue 1, Pages 19-30 , January 2009.
[11] N. Towhidi, R. Tavakkoli-moghadam and S. E. Vahdat, the use of fuzzy logic theory for selecting appropriate tool, Iranian Journal of Science & Technology, Transaction B, Engineering, Vol. 29, No. B6 ,2005
[12] Marquardt, D. W. An algorithm for least-squares estimation of nonlinear parameters. SIAM, J. Appl. Math., Vol. 11, pp. 431-441, 1963
[13] Wilamowski, B., Iplikci, S., Kaynak, O. & Efe, M. O., An algorithm for fast convergence in training neural networks. proc. Int. Conf. Neural Network, Washington, DC, USA, 2001
[14] G. Manetti, Attainment of temperature equilibrium in holes during drilling, Geothermics Volume 2, Issues 3-4, September-December 1973, Pages 94-100.
[15] Wilamowski, B. M., & Kaynak, O. (2000). Oil well diagnosis by sensing terminal characteristics of the induction motor. Industrial Electronics, IEEE Transactions on, 47(5), 1100-1107.