Numerical Optimization of Trapezoidal Microchannel Heat Sinks

Authors: Yue-Tzu Yang, Shu-Ching Liao

Abstract:

This study presents the numerical simulation of three-dimensional incompressible steady and laminar fluid flow and conjugate heat transfer of a trapezoidal microchannel heat sink using water as a cooling fluid in a silicon substrate. Navier-Stokes equations with conjugate energy equation are discretized by finite-volume method. We perform numerical computations for a range of 50 ≦ Re ≦ 600, 0.05W ≦ P ≦ 0.8W, 20W/cm² ≦q"≦ 40W/cm². The present study demonstrates the numerical optimization of a trapezoidal microchannel heat sink design using the response surface methodology (RSM) and the genetic algorithm method (GA). The results show that the average Nusselt number increases with an increase in the Reynolds number or pumping power, and the thermal resistance decreases as the pumping power increases. The thermal resistance of a trapezoidal microchannel is minimized for a constant heat flux and constant pumping power.

Keywords: Microchannel heat sinks, Conjugate heat transfer, Optimization, Genetic algorithm method.

Digital Object Identifier (DOI): doi.org/10.5281/zenodo.1094233

References:

[1] H.Y. Wu, P. Cheng, "An experimental study of convective heat transfer in silicon microchannels with different surface conditions,” International Journal of Heat and Mass Transfer, vol. 46, pp. 2547-2556, 2003.
[2] H.Y. Wu, P. Cheng, "Friction factors in smooth trapezoidal silicon microchannels with different aspect ratios,” International Journal of Heat and Mass Transfer, vol.46, pp.2519-2525, 2003.
[3] J. Koo, C. Kleinstreuer, "Viscous dissipation effects in microtubes and microchannels,” International Journal of Heat and Mass Transfer, vol. 47, pp. 3159-3169, 2004.
[4] H. Herwig, S. P. Mahulikar, "Variable property effects in single-phase incompressible flows through microchannels,” International Journal of Thermal Sciences, vol.45, pp. 977-081, 2006.
[5] A. Li, X. Huai, Y. Tao, H. Chen, "Effects of thermal property variations on the liquid flow and heat transfer in microchannel heat sinks,” Applied Thermal Engineering, vol.27, pp. 2803-2814, 2007.
[6] D. Liu, S.V. Garimella, "Analysis and optimization of the thermal performance of microchannel heat sinks,” International Journal for Numerical Methods in Heat and Fluid Flow, vol. 15, pp.7-26, 2005.
[7] A. Husain, K.Y. Kim, "Shape optimization of micro-channel heat sink for micro-electronic cooling,” IEEE Transactions on Components and Packaging Technologies, vol. 31, pp. 322-330, 2008.
[8] A. Husain, K.Y. Kim, "Thermal optimization of a micro-channel heat sink with trapezoidal cross-section,” Journal of Electronic Packaging, vol. 131, 021005, 2009.
[9] A. Husain, K.Y. Kim, "Optimization of a microchannel heat sink with temperature dependent fluid properties,” Applied Thermal Engineering, vol. 28, pp. 1101-1107, 2008.
[10] A. Husain, K.Y. Kim, "Multiobjective optimization of a microchannel heat sink using evolutionary algorithm,” Journal of Heat Transfer, vol. 130, 114505, 2008.
[11] A. Husain, K.Y. Kim, "Enhanced multi-objective optimization of a microchannel heat sink through evolutionary algorithm coupled with multiple surrogate models,” Applied Thermal Engineering, vol. 30, pp.1683-1691, 2010.
[12] S.V. Patankar: Numerical heat transfer and fluid flow, McGraw-Hill, 1980.
[13] S. Sanaye, H. Hajabdollahi, "Thermal-economic multi-objective optimization of plate fin heat exchanger using genetic algorithm,” Applied Energy, vol. 87, pp.1893-1902, 2010.
[14] R.H. Myers, D.C. Montgomery, Response surface methodology: process and product optimization using designed experiments. John Wiley ＆Sons Inc., New York, 1995.