Studies on Race Car Aerodynamics at Wing in Ground Effect
Commenced in January 2007
Frequency: Monthly
Edition: International
Paper Count: 33093
Studies on Race Car Aerodynamics at Wing in Ground Effect

Authors: Dharni Vasudhevan Venkatesan, Shanjay K E, Sujith Kumar H, Abhilash N A, Aswin Ram D, V.R.Sanal Kumar

Abstract:

Numerical studies on race car aerodynamics at wing in ground effect have been carried out using a steady 3d, double precision, pressure-based, and standard k-epsilon turbulence model. Through various parametric analytical studies we have observed that at a particular speed and ground clearance of the wings a favorable negative lift was found high at a particular angle of attack for all the physical models considered in this paper. The fact is that if the ground clearance height to chord length (h/c) is too small, the developing boundary layers from either side (the ground and the lower surface of the wing) can interact, leading to an altered variation of the aerodynamic characteristics at wing in ground effect. Therefore a suitable ground clearance must be predicted throughout the racing for a better performance of the race car, which obviously depends upon the coupled effects of the topography, wing orientation with respect to the ground, the incoming flow features and/or the race car speed. We have concluded that for the design of high performance and high speed race cars the adjustable wings capable to alter the ground clearance and the angles of attack is the best design option for any race car for racing safely with variable speeds.

Keywords: External aerodynamics, External Flow Choking, Race car aerodynamics, Wing in Ground Effect.

Digital Object Identifier (DOI): doi.org/10.5281/zenodo.1093532

Procedia APA BibTeX Chicago EndNote Harvard JSON MLA RIS XML ISO 690 PDF Downloads 5798

References:


[1] A. Silverstein, J. Becker, "Determination of boundary layer transition on three symmetrical airfoils in the NACA full-scale wind tunnel”, TR No. 637, NACA, 1939.
[2] Y. Lian, W. Shyy, "Laminar–turbulent transition of a low Reynolds number rigid or flexible airfoil”, AIAA Journal 45 (7) (July 2007) 1501– 1513.
[3] Y. Takahashi, M. Kikuchi, K. Hirano, "Analysis of ground effect on aerodynamic characteristics of aerofoils using boundary layer approximation”, JSME International Journal, Series B 49 (2) (2006) 401–409.
[4] A.E. Von Doenhoff, "Investigation of the boundary layer about a symmetrical airfoil in a wind tunnel of low turbulence”, Langley Memorial Aeronautical Laboratory, W.R. No. L.507, NACA, 1940.
[5] V.R.Sanal Kumar, Ganesh Shankar, Saravanan.A, SanthoshKumar.N, Lenin. Cand Sathyan.P, "Phenomenological Introduction of Propulsion Aspect of External Flow Choking at Wing in Ground Effect,” 50th AIAA Joint Propulsion Conference, Ohio, USA, July 2014. (To appear)
[6] K.Kikuchi.,F.Motoe, M.Yanagizawa, 1997. "Numerical simulation of the ground effect using the boundary element method”. Int. Journal for Numerical Methods in Fluids 25, 1043–1056.
[7] H.J.Kim, H.H.Chun, 1998.”Designof2-dimensional WIG section by an on linear optimizationmethod”.J.Soc.NavalArchit.Korea35 (3), 50–59.
[8] Y.J. Kim, C.Y.Joh, 2004.”Aerodynamic design optimization of air foils for WIG vehicle using response surface method”. J. Korean Soc. Aeronaut. Space Sci.33 (5), 18–27.
[9] C.Y. Joh, Y.J.Kim,2004.”Computational aerodynamic analysis of airfoils for WIG (airfoil-in-ground-effect)-craft”. J. Korean Soc. Aeronaut. Space Sci.32 (8), 37–46.
[10] S.C. Luo, Y.S. Chen, "Ground effect on flow past a wing with a NACA0015 cross-section”, Experimental Thermal and Fluid Science 40 (2012) 18–28.
[11] W. Kieffer, S. Moujaes,, N. Armbya, "CFD study of section characteristics of Formula Mazda race car Wings” Mathematical and Computer Modeling, 43, 2006, 1275-1287.
[12] S.C. Luo, and Y.S. Chen, "Ground effect on flow past a wing with a NACA0015 cross-section,” Experimental Thermal and Fluid Science 40 (2012) 18–28.
[13] J. Wu, and N. Zhao, "Ground Effect on Flapping Wing”, 7th Asian- Pacific Conference on Aerospace Technology and Science, 7th APCATS 2013, Procedia Engineering 67 (2013) 295 – 302.
[14] M.H. Djavareshkian, A. Esmaeli, "Smart Spoiler for Race Car”, World Academy of Science, Engineering and TechnologyVol: 5 2011-01-23.
[15] J. Vignesh, K.Krishnaraj. G.Sandeep. K.Sabarinath.K,, Merlin Baby Jose, V.R.Sanal Kumar, "Numerical Studies on Aerodynamics of High Performance Race Car,” World Academy of Science, Engineering and Technology: Proceedings of the International Conference on Production and Manufacturing Engineering, London, United Kingdom, May, 26-27, 2014.