A Three-Dimensional TLM Simulation Method for Thermal Effect in PV-Solar Cells

Authors: R. Hocine, A. Boudjemai, A. Amrani, K. Belkacemi

Abstract:

Temperature rising is a negative factor in almost all systems. It could cause by self heating or ambient temperature. In solar photovoltaic cells this temperature rising affects on the behavior of cells. The ability of a PV module to withstand the effects of periodic hot-spot heating that occurs when cells are operated under reverse biased conditions is closely related to the properties of the cell semi-conductor material.

In addition, the thermal effect also influences the estimation of the maximum power point (MPP) and electrical parameters for the PV modules, such as maximum output power, maximum conversion efficiency, internal efficiency, reliability, and lifetime. The cells junction temperature is a critical parameter that significantly affects the electrical characteristics of PV modules. For practical applications of PV modules, it is very important to accurately estimate the junction temperature of PV modules and analyze the thermal characteristics of the PV modules. Once the temperature variation is taken into account, we can then acquire a more accurate MPP for the PV modules, and the maximum utilization efficiency of the PV modules can also be further achieved.

In this paper, the three-Dimensional Transmission Line Matrix (3D-TLM) method was used to map the surface temperature distribution of solar cells while in the reverse bias mode. It was observed that some cells exhibited an inhomogeneity of the surface temperature resulting in localized heating (hot-spot). This hot-spot heating causes irreversible destruction of the solar cell structure. Hot spots can have a deleterious impact on the total solar modules if individual solar cells are heated. So, the results show clearly that the solar cells are capable of self-generating considerable amounts of heat that should be dissipated very quickly to increase PV module's lifetime.

Keywords: Thermal effect, Conduction, Heat dissipation, Thermal conductivity, Solar cell, PV module, Nodes, 3D-TLM.

Digital Object Identifier (DOI): doi.org/10.5281/zenodo.1093285

References:

[1] H.A. Zondag, 2007. Flat-plate PV-thermal collectors and systems – a Review, Renew. Sustain. Energy Rev. doi:10.1016/j.rser.2005.12.012.S.
[2] D. Menes-Rodrìguez, P. P. Horley, J. Gonzàlez-Hernàndez, Y. V. Vorobiev, P. N. Gorley, 2005, "Photovoltaic solar cell performance at elevated temperatures”, Solar energy, 243-250.
[3] E. Skoplaki, J. A. Palyvos, 2009, On temperature dependence of photovoltaic module electrical performances: A review of efficiency/power correlations, Solar energy, 83,614- 624.
[4] P.W.Webb and I. A. D. Russell” Application of the TLM Method to Transient Thermal Simulation of Microwave Power Transistors ", IEEE Transactions on Electron Devices, Vol.42, N°4, 1995.
[5] C.Christopoulos , " The Transmission Line Modelling Method ", IEEE/OUP Series On Electromagnetic Wave Theory, Oxford University Press, Chapter 7, pp.167-176, 1995.
[6] R. Hocine, S.H.Pulko, A. Boudghene Stambouli, A. Saidane,” TLM Method for Thermal Investigation of IGBT Modules in PWM Mode", Microelectronic Engineering Journal, Elsevier Science, 2009.
[7] R. Hocine, K. Belkacemi, A. Boukortt et A. Boudjemai "Thermal Management of Space Power Electronics Using TLM-3D" , World Academy of Science, Engineering and Technology Issue 67 July 2012 http://www.waset.org/journals/waset/v67.php,
[8] A.E.Kronberg, A.H.Benneker, "Notes on Wave theory in Heat Conduction: A new boundary condition”, International journal Heat Mass Transfer, pp 127-137, 1998.
[9] Fontenault, B., Gutierrez-Miravete, E., 2012, modeling a combined photovoltaic-thermal solar panel. Proceedings of the 2012 COMSOL Conference, Boston, USA, ww.comsol.com/offers/conference2012 papers/papers/file/id/13004/
[10] S. Yagi, M. Shimizu, Y. Yamamoto, G. Piao, Y. Yano, and H. Okumura,"High breakdown voltage AlGaN/GaN MIS-HEMT with SiN and TiO2 gate insulator,” in Proc. Int. Semicond. Device Res. Symp., Washington, DC, Dec. 2005, pp. 280–281.
[11] C.Zweben,” High performance thermal management materials”, Electronics Cooling, Vol. 5, N°3, September 1999, pp. 36-42.
[12] D.J. Lim and S.H. Pulko, "Characterisation of heat spreader materials for pulsed IGBT operation”, IET Circuits, Devices & Systems, Volume 1, issue2, April 2007, p. 126 – 136
[13] D. Menes-Rodrìguez, P. P. Horley, J. Gonzàlez-Hernàndez, Y. V. Vorobiev, P. N. Gorley, "Photovoltaic solar cell performance at elevated temperatures”, Solar energy, 243-250,2005.
[14] E. Skoplaki, J. A. Palyvos, On temperature dependence of photovoltaic module electrical performances: A review of efficiency/power correlations, Solar energy, 83,614-624, 2009.