Design Optimization of Ferrocement-Laminated Plate Using Genetic Algorithm

Authors: M. Rokonuzzaman, Z. Gürdal

Abstract:

This paper describes the design optimization of ferrocement-laminated plate made up of reinforcing steel wire mesh(es) and cement mortar. For the improvement of the designing process, the plate is modeled as a multi-layer medium, dividing the ferrocement plate into layers of mortar and ferrocement. The mortar layers are assumed to be isotropic in nature and the ferrocement layers are assumed to be orthotropic. The ferrocement layers are little stiffer, but much more costlier, than the mortar layers due the presence of steel wire mesh. The optimization is performed for minimum weight design of the laminate using a genetic algorithm. The optimum designs are discussed for different plate configurations and loadings, and it is compared with the worst designs obtained at the final generation. The paper provides a procedure for the designers in decision-making process.

Keywords: Buckling, Ferrocement-Laminated Plate, Genetic Algorithm, Plate Theory.

Digital Object Identifier (DOI): doi.org/10.5281/zenodo.1091680

References:

[1] Holland, JH, Adaptation in Natural and Artificial System, Ann Arbor, MI: The University of Michigan Press, USA, 1975.
[2] Goldberg, DE. Genetic algorithms in Search, Optimization, and Machine Learning. Reading, MA: Addison-Wesley, USA, 1989.
[3] Cezar Gabriel Diaconu and Hideki Sekine, "Layup Optimization for Buckling of Laminated Composite Shells with Restricted Layer Angles,” AIAA Journal, 2004; 42(10): 2153-2163.
[4] Park, J.H., Hwang, J.H., Lee, C.S., Hwang, W., "Stacking Sequence Design of Composite Laminates for Maximum Strength using Genetic Algorithms,” Composite Structure, 2001; 52: 217–31.
[5] Le Riche, R., Haftka, R.T., "Optimization of Laminate Stacking Sequence for Buckling Load Maximization by Genetic Algorithm,” AIAA Journal, 1993; 31(5): 951-956.
[6] Gurdal, Z, Haftka, RT, "Optimization of Composite Laminates,” NATO Advanced Study Institute on Optimization of Large Structural Systems, Berchtesgaden, Germany, September 23-October 4, 1991.
[7] Jones, RM, Mechanics of Composite Materials, Hemisphere, USA, 1975.
[8] Whitney, JM, Structural Analysis of Laminated Anisotropic Plates, Technomic Publishing Company, Inc., Lancaster, PA, USA, 1989.
[9] Tsai, SW and Wu EM, "A General Theory of Strength for Anisotropic Materials,” J. Compos. Mater, 1971; 5: 58–80.
[10] Pankaj, Arif M., Surendra K. Kaushik, "Mechanical Behavior of Ferrocement Composites: Numerical simulation,” J. Mat. in Civ. Engrg., 2002; 14(2): 156-163.
[11] McMahon, MT, Watson, LT, Soremekun, GA, Gurdal, Z, Haftka, RT, "A Fortran 90 Genetic Algorithm Module for Composite Laminate Structure Design,” Eng. Comput. 1998; 14: 260–273.
[12] Soremekun, G. Genetic Algorithms for Composite Laminate Design and Optimization, MS Thesis, Department of Engineering Science Mechanics, Virginia Polytechnic Institute and State University, Blacksburg, VA, USA, 1997.
[13] Arif, M., Pankaj, Kaushik S.K, "Mechanical Behaviour of Ferrocement Composites: an Experimental Investigation,” Cement and Concrete Composites, 1999; 21: 301-312.