Thermo-Mechanical Characterization of MWCNTs-Modified Epoxy Resin

Authors: M. Dehghan, R. Al-Mahaidi, I. Sbarski

Abstract:

An industrial epoxy adhesive used in Carbon Fiber Reinforced Polymer (CFRP) strengthening systems was modified by dispersing multi-walled carbon nanotubes (MWCNTs). Nanocomposites were fabricated using the solvent-assisted dispersion method and ultrasonic mixing. Thermogravimetric analysis (TGA), dynamic mechanical analysis (DMA) and tensile tests were conducted to study the effect of nanotubes dispersion on the thermal and mechanical properties of the epoxy composite. Experimental results showed a substantial enhancement in the decomposition temperature and tensile properties of epoxy composite, while, the glass transition temperature (T_g) was slightly reduced due to the solvent effect. The morphology of the epoxy nanocomposites was investigated by SEM. It was proved that using solvent improves the nanotubes dispersion. However, at contents higher than 2 wt. %, nanotubes started to re-bundle in the epoxy matrix which negatively affected the final properties of epoxy composite.

Keywords: Carbon Fiber Reinforced Polymer, Epoxy, Multi-Walled Carbon Nanotube, Glass Transition Temperature.

Digital Object Identifier (DOI): doi.org/10.5281/zenodo.1090639

References:

[1] O. Sindt, "Molecular architecture mechanical behaviour relationships in epoxy networks,” Polymer, vol. 37(14), pp. 2989-2997, 1996.
[2] O. Buyukozturk, "Progress on understanding debonding problems in reinforced concrete and steel members strengthened using FRP composites," Construction and Building Materials, vol. 18(1), pp. 9-19, 2004.
[3] N. Chikhi, "Modification of epoxy resin using reactive liquid (ATBN) rubber,” European Polymer Journal, vol. 38(2), pp. 251-264, 2002.
[4] M. Harsch, "Influence of fillers and additives on the cure kinetics of an epoxy/anhydride resin," European Polymer Journal, vol. 43(4), pp. 1168-1178, 2007.
[5] S. Saber-Samandari, "An experimental study on clay/epoxy nanocomposites produced in a centrifuge," Composites Part B-Engineering, vol. 38 (1), pp. 102-107, 2007.
[6] L. Guadagno, "Effect of functionalization on the thermo-mechanical and electrical behavior of multi-wall carbon nanotube/epoxy composites," Carbon, vol. 49(6), pp. 1919-1930, 2011.
[7] G. Subramanian, "Preparation of SWNT-reinforced composites by a continuous mixing process," Nanotechnology, Vol. 16(6), pp. 836-840, 2005.
[8] Q.F. Cheng, "Carbon nanotube/epoxy composites fabricated by resin transfer molding," Carbon, vol. 48(1), pp. 260-266, 2010.
[9] M. Abdalla, "Cure behavior of epoxy/MWCNT nanocomposites: The effect of nanotube surface modification," Polymer, vol. 49(15), pp. 3310-3317, 2008.
[10] L.C. Tang, "Fracture mechanisms of epoxy filled with ozone functionalized multi-wall carbon nanotubes," Composites Science and Technology, Vol. 72(1), pp. 7-13, 2011.
[11] J.D. Fidelus, "Thermo-mechanical properties of randomly oriented carbon/epoxy nanocomposites," Composites Part a-Applied Science and Manufacturing, vol. 36(11), pp. 1555-1561, 2005.
[12] J.F. Shen, "The reinforcement role of different amino-functionalized multi-walled carbon nanotubes in epoxy nanocomposites," Composites Science and Technology, vol. 67(15-16), pp. 3041-3050, 2007.
[13] E. Ivanov, "Effects of Processing Conditions on Rheological, Thermal, and Electrical Properties of Multiwall Carbon Nanotube/Epoxy Resin Composites," Journal of Polymer Science Part B-Polymer Physics, vol. 49(6), pp. 431-442, 2011.
[14] Y.H. Liao, "Investigation of the dispersion process of SWNTs/SC-15 epoxy resin nanocomposites," Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing, vol. 385(1-2), pp. 175-181, 2004.
[15] Y.X. Zhou, "Experimental study on the thermal and mechanical properties of multi-walled carbon nanotube-reinforced epoxy," Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing, vol. 452, pp. 657-664, 2007.
[16] K.Q. Xiao, "Effective separation and alignment of long entangled carbon nanotubes in epoxy," Journal of Materials Science, vol. 40(24), pp. 6513-6516, 2005.
[17] Q.P. Feng, "Synthesis of epoxy composites with high carbon nanotube loading and effects of tubular and wavy morphology on composite strength and modulus," Polymer, vol. 52(26), pp. 6037-6045, 2011.
[18] H. Miyagawa, "Thermo-physical and impact properties of epoxy nanocomposites reinforced by single-wall carbon nanotubes," Polymer, vol 45(15), pp. 5163-5170, 2004.
[19] M. Dehghan, "Effect of fabrication methods on the glass transition temperature of CNT/Epoxy composites: state-of-the-art review," in Proc. 6th Int Comp Conf (ACUN-6), Melbourne, 2011.
[20] M. Kim, "Processing, characterization, and modeling of carbon nanotube-reinforced multiscale composites," Composites Science and Technology, vol. 69(3-4), pp. 335-342, 2009.
[21] D. Puglia, "Effects of single-walled carbon nanotube incorporation on the cure reaction of epoxy resin and its detection by Raman spectroscopy," Diamond and Related Materials, vol. 12(3-7), pp. 827-832, 2003.
[22] L.J. Ci, "The reinforcement role of carbon nanotubes in epoxy composites with different matrix stiffness." Composites Science and Technology, vol. 66(3-4), pp. 599-603, 2006.
[23] K.W. Putz, "Effect of cross-link density on interphase creation in polymer nanocomposites," Macromolecules, vol. 41(18), pp. 6752-6756, 2008.
[24] C. Park, "Dispersion of single wall carbon nanotubes by in situ polymerization under sonication," Chemical Physics Letters, vol. 364(3-4), pp. 303-308, 2002.
[25] S. Ghorabi, "Effects of three surfactant types of anionic, cationic and non-ionic on tensile properties and fracture surface morphology of epoxy/MWCNT nanocomposites," Iranian Polymer Journal, vol. 21(2), pp. 121-130, 2012.
[26] S. Prolongo, "Effects of dispersion techniques of carbon nanofibers on the thermo-physical properties of epoxy nanocomposites," Composites Science and Technology, vol. 68(13), pp. 2722-2730, 2008.
[27] A. Montazeri, "Viscoelastic properties of multi-walled carbon nanotube/epoxy composites using two different curing cycles," Materials & Design, vol. 31(7), pp. 3383-3388, 2010.
[28] M. Dehghan, "Effect of Fabrication Method on Thermo-mechanical Properties of an Epoxy Composite,” The Journal of Adhesion, 2013.
[29] Y. Zhou, "Fabrication and characterization of carbon/epoxy composites mixed with multi-walled carbon nanotubes,” Materials Science and Engineering A, vol. 475(1), pp. 157-165, 2008.
[30] H. Faleh, "Fabrication and Characterization of Nano-Particles-Enhanced Epox,” Composites Part B: Engineering, 2012.
[31] A. Allaoui, "How carbon nanotubes affect the cure kinetics and glass transition temperature of their epoxy composites? - A review,” Express Polymer Letters, vol. 3(9), pp. 588-594, 2009.