Characterising the Effects of Heat Treatment on 3CR12 and AISI 316 Stainless Steels

Authors: Esther T. Akinlabi, Stephen A. Akinlabi

Abstract:

This paper reports on the effects of heat treatment on 3CR12 and AISI 316 stainless steel grades. Heat treatment was conducted on the steel grades and cooled using two different media; air and water in order to study the effect of each medium on the evolving properties of the samples. The heat treated samples were characterized through the evolving microstructure and hardness. It was found that there was a significant grain size reduction in both the heat treated stainless steel specimens compared to the parent materials. The finer grain sizes were achieved as a result of impediment to growth of one phase by the other. The Vickers microhardness values of the heat treated samples were higher compared to the parent materials due to the fact that each of the steel grades had a proportion of martensitic structures in their microstructures thereby improving the integrity of the material.

Keywords: Austenite, Ferrite, Grain size, Hardness, Martensite, Microstructure and stainless steel.

Digital Object Identifier (DOI): doi.org/10.5281/zenodo.1090591

References:

[1] B. Leffler. "Stainless – Stainless steels and their properties”. Accessed from: www.hazmetal.com/f/kutu/1236776229.pdf 29th December 2013.
[2] H. Zheng, X. Ye, L. Jiang, B. Wang, Z. Liu and G. Wang."Study on microstructure of low Carbon 12% Chromiuim stainless steel in high temperature heat-affected zone”. Journal of Materials and Design, 2010; Vol. 50(10), pp. 4836-4841.
[3] J. P. Hoffman, "A new corrosion-resistant stainless steel on the South African scene," Journal of the South African Institute of Mining and Metallurgy, 1986; Vol. 86(11), pp. 433-442.
[4] R. D. Knutsen, "Influence of Compositional Banding on Grain Anisotropy in 3CR12 Steel," Materials Science and Technology, 1992; Vol. 8(7), pp. 621-627.
[5] J. Hewitt, "High-Chromium controlled hardenability steels," Journal of the South African Institute of Mining and Metallurgy, Vol. 2, 1992, pp. 71-88.
[6] A. Ball, Y. Chauhan, and G. B. Schaffer, "Microstructure, phase equilibria and transformations in corrosion resistant dual phase steel designated 3CR12".Journal of Material Science & Technology,1987, Vol. 3, pp. 189-196.
[7] A. Kurc-Lisiecka and M. Kciuk, "The influence of heat treatment on structure, mechanical properties and corrosion resistance of steel X10CrNi18-8".Archives of Materials Science and Engineering, 2012; Vol. 55(2), pp. 62-69.
[8] A. Bayram, A. Uguz, and M. Ula, "Effects of Microstructure and Notches on the Mechanical Properties of Dual-Phased Steels". Journal of Materials Characterization, 1999, Vol. 43, pp. 259–269.
[9] E. Ulvan and A. Koursaris, "The Effect of Hot Rolling and Annealing on the Cold Bulk Formability of Steel Types 3CR12 and 304".Journal of Materials Shaping Technology, 1989; Vol. 6(4), pp. 251-260.
[10] F Blum, N R Comins, and B Z Weiss, "The influence of microstructural parameters on the yield parameters on the yield stress and fracture toughness of 3CR12 steel," Journal of the South African Institute of Mining and Metallurgy, 1992, Vol. 92(7), pp. 185-193.
[11] V. Ganesan and V. Ganesan , "Corrosion of annealed AISI 316 stainless steel in sodium environment," Journal of Nuclear Materials, 1998, Vol. 256(1), pp. 69-77.
[12] A. Di Schino and J. M. Kenny, "Analysis of the recrystallization and grain growth processes in AISI 316 stainless steel" Journal of Materials Science, 2002, vol. 37, pp. 5291-5298.
[13] N. Solomon and I. Solomon, "Deformation induced martensite in AISI 316 stainless steel," Journal of Revista De Metalurgica, 2010, Vol. 46(2), pp. 121-128.
[14] T. Long, "A Study on End-quench Process of Low Carbon Steel," Kolej Universiti Teknikal kebangsaan Malaysia (KUTKM), 2006, Malaysia, Undergraduate Disertation.
[15] R. Ramanathan and R. P. Foley, "Effect of prior microstructure on austenite decmposition and associated distortion," Illinois Institute of Technology, Chicago, Report 2001.
[16] Q. Ran, Y. Xu, J. Li, J. Wan, X. Xiao, H. Yu and L. Jiang. "Effect of heat treatment on transformation-induced plasticity of economic CR19 duplex stainless steel. Journal of Materials and Design, 2014, Vol. 56, pp. 959-969.
[17] ASTM E3-11. Standard guide for preparation of metallographic specimens. Accessed from CD. 2011.
[18] X. Wang, H. M. Lu, X. L. Li, L. Li, and Y. F. Zheng, "Microscopic phase-field simulation coupled with elastic strain energy for precipitation process of Ni-Cr-Al alloys with low Al content," Transactions of Nonferrous Metals Society of China, 2007. Vol. 17:122).