A Resistorless High Input Impedance First Order All-Pass Filter Using CCCIIs

Authors: Kapil Dev Sharma, Kirat Pal, Costas Psychalinos

Abstract:

A new first order all-pass filter topology realized using current controlled current conveyors (CCCIIs) is introduced in this paper. Offered benefits are the high-impedance of the input node, the absence of external resistors because of the usage of CCCIIs with positive and negative intrinsic resistances, the presence of only grounded capacitors, and the capability of electronic adjustment of the phase shift through a single bias current. The correct operation of the introduced topology is conformed through simulation results, while its behavior is evaluated through comparison results.

Keywords: Active filters, All-pass filters, Analog signal processing, Current conveyors.

Digital Object Identifier (DOI): doi.org/10.5281/zenodo.1335978

References:

[1] A. Sedra, and K. Smith, "A second generation current conveyor and its applications”, IEEE Transactions on Circuit Theory, 17, pp.132-134, 1970.
[2] H. O. Elwan and A. M. Soliman, "Novel CMOS current conveyor realisation with an electronically tunable current mode filter suitable for VLSI”, IEEE Transactions on Circuits and Systems-II, 43, pp. 663-670 1996.
[3] A. Fabre, O. Said, F. Wiest, and C. Boucheron, "High-frequency applications based on a new current controlled conveyor”, IEEE Transactions on Circuits and Systems, 43, pp.82-91, 1996.
[4] H. O. Elwan and A. M. Soliman, "Low voltage low power CMOS current conveyors”, IEEE Transactions on Circuits and Systems-I, 44, pp. 828-835, 1997.
[5] I. Awad and A. M. Soliman, "New CMOS realization of the CCII”, IEEE Transactions on Circuits and Systems-II, 46, pp.460-463, 1999.
[6] H. Barthelemy, A. Fabre, "A second generation current-controlled conveyor with negative intrinsic resistance” IEEE Transactions on Circuits and Systems, 49, pp.63-65, 2002.
[7] O. Cicekoglu, H, Kuntman, and S. Berk, "All-pass filter using single current conveyor", International Jounal of Electronics, 86, pp. 947-955, 1999.
[8] I. A. Khan, and S. Maheshwari, "Simple first order all-pass section using CCII”, International Journal of Electronics, 87, pp.303-306, 2000.
[9] S. Maheshwari, and I. A. Khan, "Novel first order all-pass sections using a single CCII", International Journal of Electronics, 87, pp.773-778, 2001.
[10] A. Toker, S. Ozcan, H, Kuntman, and O. Cicekoglu, "Supplementary all-pass sections with reduced number of passive elements using a single current conveyor", International Journal of Electronics, 88, pp. 969-976, 2001.
[11] S. Maheshwari, "New voltage and current-mode APS using current controlled conveyor", International Journal of Electronics, 91, pp.735-743, 2004.
[12] N. Pandey, and S. K. Paul, "All pass filter based on CCII- and CCCII-", International Journal of Electronics, 91, pp. 485-489, 2004.
[13] K. Pal, and S. Rana, "Some new first order all-pass realizations using CCII” Active & Passive Electronic Components Journal, 27, pp. 91-94, 2004.
[14] J. W. Horng, "Current conveyors based all-pass filters and quadrature oscillators employing grounded capacitors and resistors”, Computers and Electrical Engineering, 31, pp. 81-92, 2005.
[15] S. Minaei, and O. Cicekoglu, "A resistorless realization of the first order all-pass filter”, International Journal of Electronics, 93, pp.177-183, 2006.
[16] M. Higashimura, and Y. Fukui, "Realization of all pass networks using a current conveyor", International Journal of Electronics, 65, pp. 249-250, 1988.
[17] R. Senani, "New electronically tunable OTA-C sinusoidal oscillators”, Electronics Letters, 25, pp.286-287, 1989.