Hot Workability of High Strength Low Alloy Steels

Authors: Seok Hong Min, Jung Ho Moon, Woo Young Jung, Tae Kwon Ha

Abstract:

The hot deformation behavior of high strength low alloy (HSLA) steels with different chemical compositions under hot working conditions in the temperature range of 900 to 1100℃ and strain rate range from 0.1 to 10 s-1 has been studied by performing a series of hot compression tests. The dynamic materials model has been employed for developing the processing maps, which show variation of the efficiency of power dissipation with temperature and strain rate. Also the Kumar-s model has been used for developing the instability map, which shows variation of the instability for plastic deformation with temperature and strain rate. The efficiency of power dissipation increased with decreasing strain rate and increasing temperature in the steel with higher Cr and Ti content. High efficiency of power dissipation over 20 % was obtained at a finite strain level of 0.1 under the conditions of strain rate lower than 1 s-1 and temperature higher than 1050 ℃ . Plastic instability was expected in the regime of temperatures lower than 1000 ℃ and strain rate lower than 0.3 s-1. Steel with lower Cr and Ti contents showed high efficiency of power dissipation at higher strain rate and lower temperature conditions.

Keywords: High strength low alloys steels, hot workability, Dynamic materials model, Processing maps.

Digital Object Identifier (DOI): doi.org/10.5281/zenodo.1070929

References:

[1] J. R. Davies, Carbon and Alloy Steels, ASM international, Ohio, USA, 1996.
[2] R. M. Brick, A. W. Pense and R. B. Gordon, Structure and Properties of Engineering Materials, 4th Ed., McGraw-Hill, NY, USA, 1977.
[3] W. B. Morrison, J. Iron and Steel Inst., vol. 210, p. 618, 1972.
[4] M. Umemoto, I. Yamur and T. Osuka, Tetsu-to-Hagane. vol. 68 (1982), p. 1384, 1982.
[5] I. Tamura, H. Sekine, T. Tanaka and C. Ouchi, Thermomechanical Processing of High-Strength Low-Alloy Steels, Butterworth & Co. Ltd., Boston, USA, 1988.
[6] W. Barr and C. F. Tipper, J. Iron and Steel Inst., vol. 157, p. 223, 1947.
[7] H. Gondoh, S. Gohsa and I. Kimura, Tetsu-to-Hagane, vol. 3, p. 629, 1967.
[8] I. Kozasu, T. Shimizu and H. Kobota, Trans. ISIJ, vol. 11, p. 71, 1971.
[9] Y. V. R. K. Prasad, H. L. Gegel, S. M. Doraivelu, J. C. Malas, J. T. Morgan, K. A. Lark, and D. R. Barker, Metall. Trans., vol. 15A, p. 1883, 1984.
[10] A. K. S. Kalyan Kumar, Criteria for predicting metallurgical instabilities in processing, M.Sc Eng. Thesis, Indian Institute of Science, Bangalore, India, 1987.
[11] Y. V. R. K. Prasad, and T. Seshacharyulu, Mater. Sci. Eng., vol. A243, p. 82, 1998.
[12] R. A. P. Djaic and J. J. Jonas, Metall. Trans. A, vol. 4, p. 621, 1973.
[13] S. Yamamoto, C. Ouchi and T. Osuka, Thermomechanical Processing of Microalloyed Austenite, American Insititue of Mining, Metallurgical, and Petroleum Engineers, USA, 1982.
[14] J. J. Jonas and I. Weiss, Met. Sci. J., vol. 13, p. 238, 1973.