Rigorous Modeling of Fixed-Bed Reactors Containing Finite Hollow Cylindrical Catalyst with Michaelis-Menten Type of Kinetics

Authors: Mohammad Asif

Abstract:

A large number of chemical, bio-chemical and pollution-control processes use heterogeneous fixed-bed reactors. The use of finite hollow cylindrical catalyst pellets can enhance conversion levels in such reactors. The absence of the pellet core can significantly lower the diffusional resistance associated with the solid phase. This leads to a better utilization of the catalytic material, which is reflected in the higher values for the effectiveness factor, leading ultimately to an enhanced conversion level in the reactor. It is however important to develop a rigorous heterogeneous model for the reactor incorporating the two-dimensional feature of the solid phase owing to the presence of the finite hollow cylindrical catalyst pellet. Presently, heterogeneous models reported in the literature invariably employ one-dimension solid phase models meant for spherical catalyst pellets. The objective of the paper is to present a rigorous model of the fixed-bed reactors containing finite hollow cylindrical catalyst pellets. The reaction kinetics considered here is the widely used Michaelis–Menten kinetics for the liquid-phase bio-chemical reactions. The reaction parameters used here are for the enzymatic degradation of urea. Results indicate that increasing the height to diameter ratio helps to improve the conversion level. On the other hand, decreasing the thickness is apparently not as effective. This could however be explained in terms of the higher void fraction of the bed that causes a smaller amount of the solid phase to be packed in the fixed-bed bio-chemical reactor.

Keywords: Fixed-bed reactor, Finite hollow cylinder, Catalyst pellet, Conversion, Michaelis-Menten kinetics.

Digital Object Identifier (DOI): doi.org/10.5281/zenodo.1332920

References:

[1] Bird, R.B., Stewart, W.E., and Lightfoot, E.N. Transport Phenomena, 2nd Ed. John Wiley & Sons, Inc. 2002.
[2] Aris, R., The optimal design of chemical reactors: a study in dynamic programming. Academic Press, 1961
[3] Mars, P. and Gorgels, M. J., 1964, Hydrogenation of acetylene -a theory of selectivity. In Chemical Reaction Engineering: Proceedings of the Third European Symposium, Supplement to Chem. Eng. Sci., pp. 55-65. Oxford: Pergamon Press.
[4] Michalko, E., 1966a, Method for oxidizing gaseous combustible waste products, U.S. Patent 3,259,454.
[5] Michalko, E.,1966b, Preparation of catalyst for the treatment of combustible waste products, U.S. Patent 3,259,589.
[6] Kasaoka, S. and Sakata, Y., 1968, Effectiveness factors for non-uniform catalyst pellets, J. Chem. Eng. Japan 1: 138-142.
[7] Villadsen, J. and Michelsen, M.J., 1978, Solution of Differential Equations Models by Polynomial Approximation, Prentice-Hall, New Jersey
[8] Becker, E. R. and Wei, J., 1977, Non-uniform distribution of catalysts on supports. Bimolecular Langmuir reactions, J. Catal. 46: 365-371.
[9] Juang, H.-D. and Weng, H.-S., 1983. Performance of catalysts with nonuniform activity profiles 2. Theoretical analysis for non-isothermal reactions. Ind. Eng. Chem. Fundam. 22: 224-230.
[10] Johnson, D. L., and Verykios, X. E., 1983, Selectivity enhancement in ethylene oxidation employing partially impregnated catalysts, J. Catal. 79: 156-163.
[11] Johnson, D. L., and Verykios, X. E., 1984, Effects of radially nonuniform distributions of catalytic activity on performance of spherical catalyst pellets, AI.ChEJ. 30: 44-50.
[12] Morbidelli, M., Servida, A. and Varma, A., 1982, Optimal catalyst activity profiles in pellets 1. The case of negligible external mass transfer resistance, Ind. Eng. Chem. Fundam. 21: 278-284.
[13] Morbidelli, M., Gavriilidis, A. and Varma, A., 2001, Catalyst design, Optimal distribution of catalyst in pellets, reactors and membranes, Cambridge University Press, Cambridge, UK.
[14] Wu, H., Brunovska, A., Morbidelli, M. and Varma, A., 1990, Optimal catalyst activity profiles in pellets VIII. General nonisothermal reacting systems with arbitrary kinetics, Chem. Eng. Sci. 45: 1855-1862; 46: 3328-3329.
[15] Baratti, R., Gavriilidis, A., Morbidelli, M., and Varma, A., 1994, Optimization of a non-isothermal non-adiabatic fixed-bed reactor using Dirac-type silver catalysts for ethylene epoxidation, Chem. Eng. Sci. 49: 1925-1936
[16] Hwang, S., Linke, P. and Smith, R., 2004, Heterogeneous catalytic reactor design with optimum temperature profile II: application o nonuniform catalyst, Chem. Eng. Sci. 59: 4245-4260.
[17] Armor, J.N., 2005, Do you really have a better catalyst? Appl. Catal. A: General 282: 1-4.
[18] Khanaev, V.M., Borisova, E.S. and Noskov, A.S., 2004, Optimization of the active component through the catalyst bed, Chem. Eng. Sci. 59: 1213-1220.
[19] Wei, J. 2011, Catalyst designs to enhance diffusivity and performance-I: Concepts and analysis, Chem. Eng. Sci. 66: 4382-4388.
[20] Wang, G., Coppens, M.-O., 2010. Rational design of hierarchically structured porous catalysts for autothermal reforming of methane. Chem. Eng. Sci. 65:2344.
[21] Wang, G., Johannessen, E., Kleijn, C.R., deLeeuw, S.W., Coppens, M.- O., 2007, Optimizing transport in nano structured catalysts: a computational study, Chem. Eng. Sci. 62: 5110-5118.
[22] Ying, J., Garcia Martinez, J., 2009, Mesostructured zeolitic materials, and methods of making and using them.US Patent US7,589,041 B2, issued September 15, 2009.
[23] Asif, M., 2012, Conversion in Chemical Reactors using Hollow Cylindrical Catalyst Pellet, International Journal of Chemical and Environmental Engineering 6: 178-183.