Mixed-Mode Study of Rock Fracture Mechanics by using the Modified Arcan Specimen Test

Authors: R. Hasanpour, N. Choupani

Abstract:

This paper studies mixed-mode fracture mechanics in rock based on experimental and numerical analyses. Experiments were performed on sharp-cracked specimens using the modified Arcan specimen test loading device. The modified Arcan specimen test was, in association with a special loading device, an appropriate apparatus for experimental mixed-mode fracture analysis. By varying the loading angle from 0° to 90°, pure mode-I, pure mode-II and a wide range of mixed-mode data were obtained experimentally. Using the finite element results, correction factors applied to the rectangular fracture specimen. By employing experimentally measured critical loads and the aid of the finite element method, mixed-mode fracture toughness for the limestone under consideration determined.

Keywords: Rock Fracture Mechanics, Mixed-mode Loading, Finite Element Analysis, Arcan Test specimen.

Digital Object Identifier (DOI): doi.org/10.5281/zenodo.1063094

References:

[1] L. Lim, I. W. Johnston, S. K. Choi, J. N. Boland, "Fracture Testing of a Soft Rock with Semi-circular Specimens Under Three-point Bending. Part 2--Mixed-mode", Int. J. Rock Mech. Min. Sci. & Geomech. Vol. 31, No. 3, pp. 199-212, 1994.
[2] Y. Nara, K. Kaneko, "Sub-critical crack growth in anisotropic rock" International Journal of Rock Mechanics & Mining Sciences vol. 43, p. 437-453, (2006).
[3] T. Backers, S. Stanchits, G. Dresen, "Tensile fracture propagation and acoustic emission activity in sandstone: The effect of loading rate" International Journal of Rock Mechanics & Mining Sciences vol. 42, p. 1094-1101, (2005).
[4] Y. Nara, K. Kaneko, "Study of subcritical crack growth in Andesite using the Double Torsion test" International Journal of Rock Mechanics & Mining Sciences vol. 42, p.521-530, (2005).
[5] Feng Chen, Ping Cao, Q.H. Rao, C.D. Ma, Z.Q. Sun, "A mode II fracture analysis of double edge cracked Brazilian disk using the weight function method" International Journal of Rock Mechanics & Mining Sciences vol. 42, p.461-465, (2005).
[6] M.H.B. Nasseri, B. Mohanty, P.-Y. F. Robin, "Characterization of microstructures and fracture toughness in five granitic rocks" International Journal of Rock Mechanics & Mining Sciences vol. 42, p.450-460, (2005).
[7] J.G. Donovan, M.G. Karfakis, "Adaptation of a simple wedge test for the rapid determination of mode I fracture toughness and the assessment of relative fracture resistance", International Journal of Rock Mechanics & Mining Sciences vol. 41, p.695-701, (2004).
[8] Q.Z. Wang, X.M. Jia, L.Z. Wu, "Wide-range stress intensity factors for the ISRM suggested method using CCNBD specimens for rock fracture toughness tests" International Journal of Rock Mechanics & Mining Sciences vol. 41, p. 709-716, (2004).
[9] Q.Z. Wang, L.Z. Wu, "The flattened Brazilian disc specimen used for determining elastic modulus, tensile strength and fracture toughness of brittle rocks: experimental results", International Journal of Rock Mechanics & Mining Sciences vol. 41, p. 357-358, (2004).
[10] H.Y. Liu, S.Q. Kou, P.-A. Lindqvist, C.A. Tang, "Numerical simulation of shear fracture (Mode II) in heterogeneous brittle rock", International Journal of Rock Mechanics & Mining Sciences, vol. 41, p. 355, (2004).
[11] Jeoungseok Yoon, Seokwon Jeon, "Experimental verification of a (Punch through Shear) PTS Mode II test for rock", International Journal of Rock Mechanics & Mining Sciences vol. 41, p. 353-354, (2004).
[12] Q.Z. Wang, X.M. Jia, S.Q. Kou, Z.X. Zhang, P. -A. Lindqvist, "More accurate stress intensity factor derived by finite element analysis for the ISRM suggested rock fracture toughness specimenÔÇöCCNBD" International Journal of Rock Mechanics & Mining Sciences vol. 40, p. 233-241, (2003).
[13] T. Backers, O. Stephansson, E. Rybacki "Rock fracture toughness testing in Mode IIÔÇöpunch through shear test", International Journal of Rock Mechanics & Mining Sciences vol. 39, p. 755-769, (2002).
[14] Z.X. Zhang, "An empirical relation between mode I fracture toughness and the tensile strength of rock" International Journal of Rock Mechanics & Mining Sciences vol. 39 p. 401-406 (2002).
[15] Choupani, N. "Experimental and Numerical Investigation of the Mixed- Mode Delamination in Arcan Laminated Specimens", International Journal of Materials Science & Engineering, in press.
[16] P.M. Noury, R.A. Shenoi and I. Sinclair, "On mixed-mode fracture of PVC foam", International Journal of Fracture vol. 92, p. 131-151, 1998.
[17] ASTM E399, Standard Test Method for Plane Strain Fracture Toughness and Strain Energy Release Rate of Metalic Materials: Annual Book of ASTM Standards, 1983.
[18] ASTM D5045, Standard Test Method for Plane Strain Fracture Toughness and Strain Energy Release Rate of Plastic Materials: Annual Book of ASTM Standards, 1995.
[19] R. A. Jurf, R. B. Pipes, "Interlaminar Fracture of Composite Materials", J. Composite Materials, vol. 16, p. 386-394, 1982.
[20] M. Arcan, Z. Hashin, and A. Voloshin, "A Method to Produce Plane- Stress States with Applications to Fiber-Reinforced Materials", Experimental Mechanics, vol. 18, p. 141-6, 1978.
[21] S. H. Yoon and C. S. Hong, "Interlaminar Fracture Toughness of Graphite/Epoxy Composite under Mixed-Mode Deformations", Experimental Mechanics, vol. 30(3), p. 234-239, 1990.
[22] L. Banks-Sills, M. Arcan, and Y. Bortman, "A Mixed Mode Fracture Specimen for Mode II Dominant Deformation", Engineering Fracture Mechanics, vol. 20(1), p. 145-157, 1984.
[23] K. J. Miller and D. L. McDowell, "Mixed-Mode Crack Behavior", West Conshohocken, Penn: ASTM, 1999.
[24] H. P. Rossmanith and K. J. Miller, "Mixed-Mode Fatigue and Fracture": Papers Presented at the International Conference on Mixed-Mode Fracture and Fatigue Held at the Technical University of Vienna, Austria. London: European Structural Integrity Society: Mechanical Engineering Publications, 1993.
[25] E. E. Gdoutos, Problems of Mixed Mode Crack Propagation. Boston; Hingham, MA, USA: M. Nijhoff ; Distributors for the U.S. and Canada, Kluwer Boston, 1984.
[26] E. E. Gdoutos, D. A. Zacharopoulos, and E. I. Meletis, "Mixed-Mode Crack Growth in Anisotropic Media", Engineering Fracture Mechanics, vol. 34(2), p. 337-346, 1989.
[27] Habbit, Karlsson, and Sorensen, "ABAQUS User's Manual Version 6.2.4," 2001.