Verification of a Locked CFD Approach to Cool Down Modeling

Authors: P. Bárta

Abstract:

Increasing demand on the performance of Subsea Production Systems (SPS) suggests a need for more detailed investigation of fluid behavior taking place in subsea equipment. Complete CFD cool down analyses of subsea equipment are very time demanding. The objective of this paper is to investigate a Locked CFD approach, which enables significant reduction of the computational time and at the same time maintains sufficient accuracy during thermal cool down simulations. The result comparison of a dead leg simulation using the Full CFD and the three LCFD-methods confirms the validity of the locked flow field assumption for the selected case. For the tested case the LCFD simulation speed up by factor of 200 results in the absolute thermal error of 0.5 °C (3% relative error), speed up by factor of 10 keeps the LCFD results within 0.1 °C (0.5 % relative error) comparing to the Full CFD.

Keywords: CFD, Locked Flow Field, Speed up of CFD simulation time, Subsea

Digital Object Identifier (DOI): doi.org/10.5281/zenodo.1060880

References:

[1] R. Moe, S. S├©rbye, K. Skogen and C. Lofseik, "A Comparison of Experimental Data and CFD Predicted Cool Down in Subsea Equipment," in Proceedings of the Fourth International conference on CFD in the Oil and Gas, Metallurgical & Process Industries, SINTEF/NTNU, Trondheim, Norway, June 2005.
[2] U. Mme, S. Johansen, S. Sarkar, R. Moe, A. Goldszal, H. Holm and Y. Ladam, "Flow and heat transfer in pipe caused by localized cold spot," in Proceedings of the Sixth International conference on CFD in the Oil and Gas, Metallurgical & Process Industries, SINTEF/NTNU, Trondheim, Norway, June 2008.
[3] S. Taxy, E. Lebreton, "Use of Computational Fluid Dynamics to Investigate the Impact of Cold Spots on Subsea Insulation Performance," in Proceedings of the Offshore Technology Conference, Houston, USA, May 2004.
[4] B. Andersson, R. Andersson, L. Håkansson, M. Mortensen, R. Sudiyo, B. Wachem, Computational Fluid Dynamics for Engineers. New York, USA: Cambridge University Press, 2012.
[5] F. P. Incropera, D. P. Dewitt, T. L. Bergman, A. S. Lavine, Fundamentals of Heat and Mass Transfer. USA: John Wiley & Sons, Inc., 2007.