Investigations of Natural Convective Heat Transfer in Rectangular Thermal Passages

Authors: Hussain H. Al-Kayiem, Ahmed K. Hussein, Toh Seng Peow

Abstract:

The evaluation of the convective heat transfer of flow in passages with rectangular cross section is still of interest for the heat transfer investigators, as in the air heater solar collectors. The aim of this paper is to present investigation results on the natural convection heat transfer in a solar air heater. The effect of the channel length as heat transfer surface and the inclination of the passage were investigated. The results were obtained experimentally and theoretically. For that, an experimental test rig was fabricated with channel lengths of 1m, 1.5m, and 2m. For each length, the air outlet and inlet temperatures, absorber and cover temperatures, solar radiation intensity and air flow rate were measured at 10o, 30o, 50o, 70o, and 90o tilt angles. Measurements were recorded every 2 hours interval to investigate the transient behavior of the system. The experimental and theoretical results are presented in terms of Nu number versus Ra number and discussed. The percentages of differences between experimental and theoretical results are within the margin of 6% to 13%, effectively. It is recommended to extend the investigation to study the same configurations with different artificial surface roughing by ribs or pins.

Keywords: Convective heat transfer, Flat plate, Natural convection, Passage flow, Solar energy.

Digital Object Identifier (DOI): doi.org/10.5281/zenodo.1335854

References:

[1] G. Gan, A parametric study of Trombe walls for passive cooling of buildings. Energy and Buildings 1998, 27:37–43.
[2] K. S. Ongand C.C. Chow, 2003. Performance of a solar chimney. Solar Energy 74, 1–17.
[3] Khedari J., Boonsri B, and Hirunlab J. “Ventilation impact of a solar chimney on indoor temperatue fluction and air change in a school building” energy and building 2000, 32:89-39.
[4] M. R. Heras, M. J. Jiménez, San Isidro, K.J. Zarzalejo, and M. Pérez, “Energetic analysis of a passive solar design, incorporated in a courtyard after refurbishment, using an innovative cover component based in a sawtooth roof concept. Solar Energy 2005,78:85-96.
[5] Bouchair A. “Moving air using stored solar energy. Proceedings of 13th National Passive Solar Conference, Cambridge, Massachusetts, 1988:33– 38.
[6] C. J. Hocevar andR. L. Casperson, Thermocirculation data and instantaneous efficiencies for Trombe walls. In: Proceedings of 4thNational Passive Solar Conference, Kansas City, Missouri, USA, 1979: 163–167.
[7] N. K. Bansal, R. Mathur, and M.S. Bhandari, “Solar chimney for enhanced stack ventilation” Building and Environment, 1993. 28:373–377.
[8] D.J. Harris, N. Helwig, Solar chimney and building ventilation, School of the Built Environment. Heriot-Watt University, Edinburgh EH14 4AS, United Kingdom. 2006.
[9] K.T. Anderson, “Theoritical considerations on natural ventilation by thermal buoyancy” Trans. ASHRAE 01 (2) 1995, 1103-1117.
[10] J. Hirunlabh, W. Kongduang, P. Namprakai, and J. Khedari, Study of natural ventilation of houses by metallic solar wall under triopical climate. Renewable Energy 1999;18 ;109 -19.
[11] Swinbank W. C. “Long-wave radiation from clear skies” Q. J. R. Meteoro.Soc 1963;89:339.
[12] J.A. Duffie, W.Beckmann, Solar Engineering of Thermal Processes, Wiley Interscience, New York, 1980.
[13] Sreejaya K.V., H. H. Al-Kayiem, and S. I. Ul-Haq Gilani, Analytical Analysis of Roof Top Solar Chimney for Power Generation, Journal of Applied Sciences 11 (10), (2011), pp. 1741-1748 DOI: 10.3923/jas.2011.1741.1748.