Design of One – Dimensional Tungsten Gratings for Thermophotovoltaic Emitters

Authors: Samah. G. Babiker, Shuai Yong, Mohamed Osman Sid-Ahmed Xie Ming, A.M. Abdelbagi

Abstract:

In this paper, a one - dimensional microstructure tungsten grating (pyramids) is optimized for potential application as thermophotovoltaic (TPV) emitter. The influence of gratings geometric parameters on the spectral emittance are studied by using the rigorous coupled-wave analysis (RCWA).The results show that the spectral emittance is affected by the gratings geometrical parameters. The optimum parameters are grating period of 0.5µm, a filling ratio of 0.8 and grating height of h=0.2µm. A broad peak of high emittance is obtained at wavelengths between 0.5 and 1.8µm. The emittance drops below 0.2 at wavelengths above 1.8µm. This can be explained by the surface plasmon polaritons excitation coupled with the grating microstructures. At longer wavelengths, the emittance remains low and this is highly desired for thermophotovoltaic applications to reduce the thermal leakage due to low-energy photons that do not produce any photocurrent. The proposed structure can be used as a selective emitter for a narrow band gap cell such as GaSb. The performance of this simple 1-D emitter proved to be superior to that from more complicated structures. Almost all the radiation from the emitter incident, at angles up to 40°, on the cell, could be utilized to produce a photocurrent. There is no need for a filter.

Keywords: Thermophotovoltaic, RCWA, Grating, Emittance, Surface plasmon polaritons

Digital Object Identifier (DOI): doi.org/10.5281/zenodo.1088070

References:

[1] S. Basu, Y.-B. Chen, and Z. M. Zhan, “Microscale radiation in thermophotovoltaic devices - A review,” Int. J. Energy Res, vol. 31, pp.689-716,Jan 2007.
[2] L. P. Wang, and Z. M. Zhang, “Wavelength-selective and diffuse emitter enhanced by magnetic polaritons for thermophotovoltaics,” App. Phy. Lett , vol.100,pp. 063902 1-4,Feb 2012.
[3] S. I. Mostafa, N.H. Rafat, and S.A. El-Naggar, “One-dimensional metallic-dielectric (Ag/SiO2) photonic crystals filter for thermophotovoltaic applications,” J. Ren .Energy,” vol.45, pp.245-250,Mar 2012.
[4] J.T. Coutts, G. Guazzoni, and J. Luther, “Thermophotovoltaic Generation of Electricity: Fifth Conference on Thermophotovoltaic Generation of Electricity,” Rome, Italy, 16-19 September2002.
[5] Y-B. Chen (thesis),”Rigorous Modeling of the Radiative Properties of Micro/Nanostructures and Comparisons with Measurements of Fabricated Gratings Slit Arrays,” Georgia Institute of Technology May, 2007.
[6] M.D. Whale, “The influence of interference and heterojunctions on the performance of microscale thermophotovoltaic devices,” Microscale The.phy. Engineering, vol.5, pp.89-106,Apr 2001.
[7] D. Diso , A. Licciulli , A. Bianco b, M. Lomascolo , G. Leo , M. Mazzer , S. Tundo , G. Torsello and A. Maffezzoli, “Erbium containing ceramic emitters for thermophotovoltaic energy Conversion,” J Mat Sci and Engineering B, vol.98 ,pp.144-149,Jan 2003
[8] H. Sai, Y. Kanamori, K. Hane, and H. Yugami, “Numerical study on spectral properties of tungsten one dimensional surface-relief gratings for spectrally selective devices,” J. Opt. Soc. Am, A, vol. 22, pp.1805-1813,Sep 2005
[9] P. Nagpal, S. E. Han, A. Stein, and D. J. Norris, “Efficient low-temperature thermophotovoltaic emitters from metallic photonic crystals,” Nano Lett, vol. 8, pp. 3238–3243,Sep 2008
[10] A. Boueke, R. Kuhn, P. Fath, G. Willeke, and E. Bucher, “Latest results on semitransparent power silicon solar cells,” J. Sol Energy. Mat and Sol Cells, vol. 65,pp.549-553,2001
[11] C .Q. Zhang, “Recent progress in high-temperature solar selective coatings,” J. Sol Energy. Mat and Sol Cells, vol. 62,pp.63-74,2000
[12] K. Sharma, H. S. Zaidi, C. P. Logofatu, and J.R.S. Breuck, “Optical and electrical properties of nanostructured metal-silicon-metal photodetectors,” IEEE J. of Qua. Electronics, vol.38, PP.1651–1660,2002
[13] Y.-B. Chen, and Z.M. Zhang, “Design of tungsten complex gratings for thermophotovoltaic radiators,” J. Opt. Commun, vol.269: PP.411-417,2007
[14] C. Fu, and Z. M. Zhang, “Thermal radiative properties of metamaterials and other nanostructured materials: A review,” Front. Energy Power Eng. China, vol. 3,pp. 11–26,2009
[15] P.J. Hesketh, J.N. Zemel, and B. Gebhart, “Organ pipe radiant modes of periodic micromachined silicon surface,” Letter to Nature, vol.324, pp.549-551,1986
[16] S. Maruyama, T. Kashiwa, H. Yugami, and M. Esashi, “Thermal radiation from two-dimensionally confined modes in microcavities,” J. Appl. Phys. Lett, vol.79.P.1393,2001
[17] N. Z. Jovanovic (Thesis), “Two-Dimension Photonic Crystals as Selective Emitters for Thermophotovoltaic Power Conversion Applications,” Massachusetts Institute of Technology, Jun 2005
[18] L.C. Chia, and B. Feng, “The development of a micropower (micro-thermophotovoltaic) device (Review),” Power Sources, vol. 165, pp.455-480,2007
[19] A. Narayanaswamy, and G. Chen, “Thermal emission control with one-dimensional metallodielectric photonic crystals,” Phys. Rev, B, vol. 70,p.125101,2004
[20] H. Sai, H. Yugami, Y. Kanamori and K. Hane. Spectrally selective thermal radiators and absorbers with periodic microstructured surface for high-temperature applications. Micr. Thermophys. Eng, vol. 7,pp.101-115,2003
[21] H. Sai, Y. Kanamori, and H. Yugami, “Tuning of the thermal radiation spectrum in the near-infrared region by metallic surface microstructures,” J. Micromechanics and Micro Engineering, 15,PP. S243–S249,2005
[22] H. Sai, Y. Kanamori, and H. Yugami,” High-temperature resistive surface grating for spectral control of thermal radiation,” Appl. Phys. Lett, vol.82,pp.1685-1687, 2003.
[23] S.Y. Lin, J. Moreno, and J.G. Fleming, “Three-dimensional photonic-crystal emitter for thermal photovoltaic power generation,” J. App .Phy .Lett, vol.83,pp.380-382, 2003.
[24] N. N.-Huu, Y.-B. Chen and Y.-L. Lo, “Development of a polarization-insensitive thermophotovoltaic emitter with a binary grating,” Opt. S. of Am. Express, vol. 20, pp. 5882-5890,Mar 2012.
[25] M. G. Moharam, and T. K. Gaylord, “Rigorous coupled-wave analysis of planar-grating diffraction,” Opt. Soc. Am, vol.71,pp.811-818,Jul 1981.
[26] S. Peng, and G. M. Morris, “Efficient implementation of rigorous coupled-wave analysis for surface-relief gratings,” Opt. Soc. Am. A,vol. 12,pp.1087-1096,May 1995.
[27] H. Sai, T. Kamikawa, Y. Kanamori, K. Hane, H. Yugami and M. Yamaguchi. Thermophotovoltaic generation with microstructured tungsten selective emitters. In: Proceedings of the 6th conference on thermophotovoltaic generation of electricity, pp. 206–214,2004.
[28] K. Qiu, and A.C.S. Hayden, “Development of a novel cascading TPV and TE power generation system,” J. App. Energy, vol. 91, pp. 304–308, Jan2012.
[29] D.W. Lunch, and W.R. Hunter, “Tungsten (W), in: E.D. Palik (Ed.), Handbook of Optical Constants of Solids, vol. 1, San Diego, CA, 1998
[30] A.W. Bett, and O.V. Sulima, “Gasb photovoltaic cells for applications in TPV generators,” Semicond. Sci. Technol, vol.18,pp. S184-S190, May2003.
[31] H. Raether, Surface Plasmons on Smooth and Rough Surfaces and on Gratings, New York, 1988.
[32] K. Park, B.J. Lee, C. Fu, and Z.M. Zhang,” Study of the surface and bulk polaritons with a negative index metamaterial,” Opt. Soc. Am, B, vol. 22,pp. 1016-1023,May 2005.
[33] A. Heinzel, V. Boerner, A. Gombert, B Blasi, V. Wittwer and J. Luther, “Radiation filters and emitters for the NIR based on periodically structured metal surfaces,” J. of Mod. Optics, vol.47,pp. 2399-2419,Feb 2000.