Kinematic Modeling and Workspace Analysis of a Spatial Cable Suspended Robot as Incompletely Restrained Positioning Mechanism

Authors: Jahanbakhsh Hamedi, Hassan Zohoor

Abstract:

This article proposes modeling, simulation and kinematic and workspace analysis of a spatial cable suspended robot as incompletely Restrained Positioning Mechanism (IRPM). These types of robots have six cables equal to the number of degrees of freedom. After modeling, the kinds of workspace are defined then an statically reachable combined workspace for different geometric structures of fixed and moving platform is obtained. This workspace is defined as the situations of reference point of the moving platform (center of mass) which under external forces such as weight and with ignorance of inertial effects, the moving platform should be in static equilibrium under conditions that length of all cables must not be exceeded from the maximum value and all of cables must be at tension (they must have non-negative tension forces). Then the effect of various parameters such as the size of moving platform, the size of fixed platform, geometric configuration of robots, magnitude of applied forces and moments to moving platform on workspace of these robots with different geometric configuration are investigated. Obtained results should be effective in employing these robots under different conditions of applied wrench for increasing the workspace volume.

Keywords: Kinematic modeling, applied wrench, workspace, cable based robot.

Digital Object Identifier (DOI): doi.org/10.5281/zenodo.1082409

References:

[1] Dagalakis, Nicholas G., Albus, James S., Wang, Ben-Li, Unger, Joseph, and Lee, James D., "Stiffness study of a parallel link robot crane for shipbuilding applications", ASME Journal of Offshore Mechanics and Arctic Engineering, 111(3),pp.183-193, August 1989.
[2] J.Hamedi, H.Zohoor, "Simulation and Optimization of the Rectangular Stewart Cable-Suspended Robot", The 13th IASTED International Conference on Robotics , Applications and Telematics,Germany,Wurzburg, 2007, pp. 400-407.
[3] Tanaka, M., Seguchi, Y., and Shimada, S. ,"Kineto-statics of skycam-type wire transport system", In Proc. USA-Japan Symposium on Flexible Automation, Crossing Bridges:Minneapolis, Minnesota, 1988, pp.689-694.
[4] Takeda, Y. and Funabashi, H., "Kinematic Synthesis of Spatial In-parallel Wire-Driven Mechanism with Six Degrees of Freedom with High Force Transmissibility", Proceeding of ASME Design Engineering Technical Conferences, Baltimore, 2000.
[5] Yang, L. F., Martin, M. M., and Chiou, J. C., "Stability and 3-D Spatial Dynamics Analysis of a Three Cable Crane", American Society Aeronautics and Astronautics , 2000 , 2069-2076.
[6] Verhoeven, R., Hiller, M., and Tadokoro, S., "Workspace, Stiffness, Singularities and Classification of Tendon-Driven Stewart Platforms",6th International Symposium on Robot Kinematics, Strobl, Austria, 1998, pp.105-114.
[7] W. J. Shiang, D. Cannon, & J. Gorman, "Optimal force distribution applied to a robotic crane with flexible cables", Proceeding of 2000 IEEE Conference on Robotics and Automation, San Francisco,California, 2000, pp. 1948-1954.
[8] C.B. Pham, S.H. Yeo, G. Yang, M.Sh. Kurbanhusen, & I.M. Chen, "Force-Closure Workspace Analysis of Cable-Driven Parallel Mechanisms", Mechanism and Machine Theory, 41, pp.53-69, 2006.
[9] X. Diao, & O. Ma, "A method of verifying force-closure condition for general cable manipulators with seven cables", Mechanism and Machine Theory, 42, pp.1563-1576, 2007.