Design of a 5-Joint Mechanical Arm with User-Friendly Control Program

Authors: Amon Tunwannarux, Supanunt Tunwannarux

Abstract:

This paper describes the design concepts and implementation of a 5-Joint mechanical arm for a rescue robot named CEO Mission II. The multi-joint arm is a five degree of freedom mechanical arm with a four bar linkage, which can be stretched to 125 cm. long. It is controlled by a teleoperator via the user-friendly control and monitoring GUI program. With Inverse Kinematics principle, we developed the method to control the servo angles of all arm joints to get the desired tip position. By clicking the determined tip position or dragging the tip of the mechanical arm on the computer screen to the desired target point, the robot will compute and move its multi-joint arm to the pose as seen on the GUI screen. The angles of each joint are calculated and sent to all joint servos simultaneously in order to move the mechanical arm to the desired pose at once. The operator can also use a joystick to control the movement of this mechanical arm and the locomotion of the robot. Many sensors are installed at the tip of this mechanical arm for surveillance from the high level and getting the vital signs of victims easier and faster in the urban search and rescue tasks. It works very effectively and easy to control. This mechanical arm and its software were developed as a part of the CEO Mission II Rescue Robot that won the First Runner Up award and the Best Technique award from the Thailand Rescue Robot Championship 2006. It is a low cost, simple, but functioning 5-Jiont mechanical arm which is built from scratch, and controlled via wireless LAN 802.11b/g. This 5-Jiont mechanical arm hardware concept and its software can also be used as the basic mechatronics to many real applications.

Keywords: Multi-joint, mechanical arm, inverse kinematics, rescue robot, GUI control program.

Digital Object Identifier (DOI): doi.org/10.5281/zenodo.1081786

References:

[1] The Canandarm : Remote Manipulator System (RMS), Available: http://ffden-2.phys.uaf.edu/211.web.stuff/Adamczak/rms.htm
[2] G. Hirzinger, N. Sporer, M. Schedl, J. Butterfass, M. Grebenstein, "Robotics and mechatronics in aerospace," The 7th International Workshop on Advanced Motion Control, 2002, pp. 19-27.
[3] B. Shah, and H. Choset, "Surveys on Urban Search and Rescue Robotics," Carnegie Mellon University, 2005.
[4] World RoboCup. Available: http://www.robocup.org/
[5] A. Tunwannarux, S. Hirunyaphisutthikul, "Design features and characteristics of a rescue robot," Proceedings of International Symposium on Communications and Information Technologies (ISCIT), 2005.
[6] C. Zhou, "Robot motion analysis - Kinematics," 1999. Available: http://www2.isye.gatech.edu/~czhou/MOTION.pdf
[7] Thailand Rescue Robot Championship Competition rules 2006. Available: http://www.trs.or.th
[8] World RoboCup 2007. Available: http://www.robocup-us.org/
[9] J. G. Blitch, "Artificial Intelligence Technologies for Robot Assisted Urban Search and Rescue," Expert Systems with Applications, vol. 11(2), 1996, pp 109-124.
[10] A. Tunwannarux, S. Tunwannarux, "CEO Mission II rescue robot project report", UTCC, 2007.