Numerical Investigation of the Effect of Flow and Heat Transfer of a Semi-Cylindrical Obstacle Located in a Channel

Authors: Omer F. Can, Nevin Celik

Abstract:

In this study, a semi-cylinder obstacle placed in a channel is handled to determine the effect of flow and heat transfer around the obstacle. Both faces of the semi-cylinder are used in the numerical analysis. First, the front face of the semi-cylinder is stated perpendicular to flow, than the rear face is placed. The study is carried out numerically, by using commercial software ANSYS 11.0. The well-known κ-ε model is applied as the turbulence model. Reynolds number is in the range of 104 to 105 and air is assumed as the flowing fluid. The results showed that, heat transfer increased approximately 15 % in the front faze case, while it enhanced up to 28 % in the rear face case.

Keywords: External flow, semi-cylinder obstacle, heat transfer, friction.

Digital Object Identifier (DOI): doi.org/10.5281/zenodo.1077241

References:

[1] H. Abbassi, S. Turki, S. B. Nasrallah, "Numerical investigation of forced convection in a horizontal channel with a built-in triangular prism", Journal of Heat Transfer, vol. 124 (3) , pp. 571-57, 2002.
[2] H. Chattopadhyay, "Augmentation of heat transfer in a channel using a triangular prism", International Journal of Thermal Science,. vol.46 (5), pp. 501-505, 2007.
[3] M. Ali, O. Zeitoun, A. Nuhait, "Forced convection heat transfer over horizontal triangular cylinder in cross flow", International Journal of Thermal Sciences, vol.50, pp. 106-114, 2011
[4] A. C. Benim, H. Chattopadhyay, A. Nahavandi, "Computational analysis of turbulent forced convection in a channel with a triangular prism", International Journal of Thermal Sciences, vol. 50, pp. 1973- 1983, 2011
[5] S. J. Lee, C. Woo Park, "Surface-pressure variations on a triangular prism by porous fences in a simulated atmospheric boundary layer", Journal of Wind Engineering and Industrial Aerodynamics, vol.73, pp. 45-58, 1998.
[6] O. Zeitoun, M. Ali, A. Nuhait, "Convective heat transfer around a triangular cylinder in an air cross flow", International Journal of Thermal Sciences, vol. 50, pp. 1685-1697, 2011
[7] S. Srikanth, A. K. Dhiman, S. Bijjam, "Confined flow and heat transfer across a triangular cylinder in a channel", International Journal of Thermal Sciences, vol.49, pp. 2191-2200, 2010
[8] M. Bakkas, A. Amahmid, M. Hasnaoui, "Numerical study of natural convection heat transfer in a horizontal channel provided with rectangular blocks releasing uniform heat flux and mounted on its lower wall", Energy Conversion and Management, vol.49, pp. 2757-2766, 2008.
[9] M. Bakkas, A. Amahmid, M. Hasnaoui, "Steady natural convection in a horizontal channel containing heated rectangular blocks periodically mounted on its lower wall", Energy Conversion and Management, vol.47, pp. 509-528, 2006.
[10] M. Najam, A. Amahmid, M. Hasnaoui, M. El Alami, "Unsteady mixed convection in a horizontal channel with rectangular blocks periodically distributed on its lower Wall", International Journal of Heat and Fluid Flow, vol. 24, pp. 726-735, 2003.
[11] M. Dogan, M. Sivrioglu, "Experimental investigation of mixed convection heat transfer from longitudinal fins in a horizontal rectangular channel: In natural convection dominated flow regimes", Energy Conversion and Management, vol.50, pp. 2513-2521, 2009.
[12] M. Dogan, M. Sivrioglu, "Experimental investigation of mixed convection heat transfer from longitudinal fins in a horizontal rectangular channel", International Journal of Heat and Mass Transfer, vol. 53, pp. 2149-2158, 2010
[13] A. Hamouche, R. Bessaih, "Mixed convection air cooling of protruding heat sources mounted in a horizontal channel", International Communications in Heat and Mass Transfer, vol. 36, pp. 841-849, 2009.
[14] D. Mouhtadi, A. Amahmid, M. Hasnaoui, R. Bennacer, "Natural convection in a horizontal channel provided with heat generating blocks: discussion of the isothermal blocks validity", Energy Conversion and Management, vol. 53, pp. 45-54, 2011
[15] A. Dogan, M. Sivrioglu, S. Baskaya, "Investigation of mixed convection heat transfer in a horizontal channel with discrete heat sources at the top and at the bottom", International Journal of Heat and Mass Transfe , vol.49, pp. 2652-2662, 2006.
[16] B. Premachandran, C. Balaji, "Conjugate mixed convection with surface radiation from a horizontal channel with protruding heat sources", International Journal of Heat and Mass Transfer vol.49, pp. 3568-3582, 2006.
[17] J. J. M. Sillekens, C. C. M. Rindt, A. A. V. Steenhoven, "Development of laminar mixed convection in a horizontal square channel with heated side walls", International Journal of Heat and Fluid Flow vol.19, pp. 270-281, 1998
[18] ANSYS 11.0 (Academic Teaching Introductory) command References and gui.
[19] S.V. Patankar, Numerical Heat Transfer and Fluid Flow, Hemisphere, Washington, DC, 1980.
[20] B.E. Launder, D.B. Spalding, Lectures in Mathematical Models of Turbulence, Academic Press, London, 1972W.-K. Chen, Linear Networks and Systems (Book style). Belmont, CA: Wadsworth, 1993.