Engineered Cement Composite Materials Characterization for Tunneling Applications

Authors: S. Boughanem, D. A. Jesson, M. J. Mulheron, P.A. Smith C. Eddie, S. Psomas, M. Rimes

Abstract:

Cements, which are intrinsically brittle materials, can exhibit a degree of pseudo-ductility when reinforced with a sufficient volume fraction of a fibrous phase. This class of materials, called Engineered Cement Composites (ECC) has the potential to be used in future tunneling applications where a level of pseudo-ductility is required to avoid brittle failures. However uncertainties remain regarding mechanical performance. Previous work has focused on comparatively thin specimens; however for future civil engineering applications, it is imperative that the behavior in tension of thicker specimens is understood. In the present work, specimens containing cement powder and admixtures have been manufactured following two different processes and tested in tension. Multiple matrix cracking has been observed during tensile testing, leading to a “strain-hardening" behavior, confirming the possible suitability of ECC material when used as thick sections (greater than 50mm) in tunneling applications.

Keywords: Cement composite, polymeric fibers, pseudoductility, test-geometry.

Digital Object Identifier (DOI): doi.org/10.5281/zenodo.1076092

References:

[1] V. C. Li, "On engineered cementitious composites (ECC) - A review of the material and its applications " J. Advanced Concrete Technology, vol. 1, no. 3, pp. 215-230, 2003.
[2] V. C. Li, M. B. Weiman, "Hygral behavior of Engineered Cementitious Composites (ECC)," Intl J. for Restoration of Buildings and Monuments, vol. 9, no. 5, pp. 513-534, 2003.
[3] V. C. Li, S. Wang, C. Wu, "Tensile strain-hardening behavior of polyvinyl alcohol engineered cementitious composite (PVA-ECC)," ACI Materials J., vol. 98, no. 6, pp. 483-492, 2001.
[4] Japanese Society of Civil Engineers, "Recommendations for design and construction of high performance fiber reinforced cement composites with multiple fine cracks (HPFRCC)", Concrete Engineering Series, Japan, 2008.
[5] J-K. Kim, J-S. Kim, G. J. Ha, Y. Y. Kim, "Tensile and fiber dispersion performance of ECC (engineered cementitious composites) produced with ground granulated blast furnace slag," Cement and Concrete Research, vol. 37, pp. 1096-1105, 2007.
[6] H. Takashima, K. Miyagai , T. Hashida, V.C. Li, "A design approach for the mechanical properties of polypropylene discontinuous fiber reinforced cementitious composites by extrusion molding," Engineering Fracture Mechanics, vol. 70, pp. 853 - 870, 2003.
[7] A. M. Neville, "Properties of Concrete," 4th and final ed., Ed. England: Pearson Education Limited, pp. 184-185, 1995.
[8] British Standard Institution, "BS EN 1015-3: 1999. Method of test for mortar for masonry - Part 3: Determination of consistence of fresh mortar (by flow table)," London: BSI, 1999.