Applications for Additive Manufacturing Technology for Reducing the Weight of Body Parts of Gas Turbine Engines

Authors: Liubov A. Magerramova, Mikhail A. Petrov, Vladimir V. Isakov, Liana A. Shcherbinina, Suren G. Gukasyan, Daniil V. Povalyukhin, Olga G. Klimova-Korsmik, Darya V. Volosevich

Abstract:

Aircraft engines are developing along the path of increasing resource, strength, reliability, and safety. The building of gas turbine engine body parts is a complex design and technological task. Particularly complex in the design and manufacturing are the casings of the input stages of helicopter gearboxes and central drives of aircraft engines. Traditional technologies, such as precision casting or isothermal forging, are characterized by significant limitations in parts production. For parts like housing, additive technologies guarantee spatial freedom and limitless or flexible design. This article presents the results of computational and experimental studies. These investigations justify the applicability of additive technologies (AT) to reduce the weight of aircraft housing gearbox parts by up to 32%. This is possible due to geometrical optimization compared to the classical, less flexible manufacturing methods and as-casted aircraft parts with over-insured values of safety factors. Using an example of the body of the input stage of an aircraft gearbox, visualization of the layer-by-layer manufacturing of a part based on thermal deformation was demonstrated.

Keywords: Additive technologies, gas turbine engines, geometric optimization, weight reduction.

References:

[1] Geetika, S., Rayapati, S., Subrata, M. Comparison and selection of suitable materials applicable for gas turbine blades, Materials Today: Proceedings, Vol. 46, Part 17, pp. 8864–8870 (2021). https://doi.org/10.1016/j.matpr.2021.05.003
[2] Swain, B., Mallick, P., Patel, S., Roshan, R., Mohapatra, S., Bhuyan, S., Priyadarshini M., Behera, B. et al. “Failure analysis and materials development of gas turbine blades”, Materials Today: Proceedings, Vol. 33, Part 8, pp. 5143–5146 (2020). https://doi.org/10.1016/j.matpr.2020.02.859
[3] Yuan, G., Li, Y., Zhou, X., Hu, L. Preparation of complex shaped aluminum foam by a novel casting-foaming method, Materials Letters, Vol. 293, 129673 (2021). https://doi.org/10.1016/j.matlet.2021.129673
[4] Hao, J., Yu, B., Bian, J., Zheng, L., Nie, S., Li, R. Comparison of the semisolid squeeze casting and gravity casting process on the precipitation behavior and mechanical properties of the Al-Si-Cu-Mg alloy, Materials Characterization, Vol. 180, 111404 (2021). https://doi.org/10.1016/j.matchar.2021.111404
[5] Ghiaasiaan, R., Amirkhiz, B.S., Shankar, S. Quantitative metallography of precipitating and secondary phases after strengthening treatment of net shaped casting of Al-Zn-Mg-Cu (7000) alloys. Materials Science and Engineering: A, Vol. 698, pp. 206–217 (2017). https://doi.org/10.1016/j.msea.2017.05.047
[6] Li, Y., Liu, J., Zhang, Q., Huang, W. Casting defects and microstructure distribution characteristics of aluminum alloy cylinder head with complex structure, Materials Today Communications, Vol. 27, 102416, pp. (2021). https://doi.org/10.1016/j.mtcomm.2021.102416
[7] Mayer, H., Papakyriacou, M., Zettl, B., Stanzl-Tschegg, S. Influence of porosity on the fatigue limit of die cast magnesium and aluminium alloys, International Journal of Fatigue, V. 25, Issue 3, pp. 245–256 (2003). https://doi.org/10.1016/S0142-1123(02)00054-3
[8] Wang, Q., Apelian, D., Lados, D. Fatigue behavior of A356-T6 aluminum cast alloys. Part I. Effect of casting defects, Journal of Light Metals, Vol. 1, Issue 1, pp. 73–84 (2001). https://doi.org/10.1016/S1471-5317(00)00008-0
[9] Yi, J., Gao, Y., Lee, P. et al. Scatter in fatigue life due to effects of porosity in cast A356-T6 aluminum-silicon alloys, Metall Mater Trans A, Vol. 34, 1879 (2003). https://doi.org/10.1007/s11661-003- 0153-6
[10] Code of Federal Regulations, 14 CFR, Part 29.621 Airworthiness Standards: Transport Category Rotorcraft. https://www.ecfr.gov/current/title-14/chapter-I/subchapter-C/part-29, last amended 20/03/2022
[11] Gibson, Ya., Rosen, D., Stucker, B., Khorasani, M. Additive manufacturing technologies, 3rd edition, Springer Nature, Switzerland, p. 698, 2021. https://doi.org/10.1007/978-3-030-56127-7
[12] Zhao, T., Wang, Y., Xu, T., Bakir, M., et al. Some factors affecting porosity in directed energy deposition of AlMgScZr-alloys, Optics & Laser Technology, Vol. 143 (2021). https://doi.org/10.1016/j.optlastec.2021.107337
[13] Spierings, A., Dawson, K., Uggowitzer, P., Wegener, K. Influence of SLM scan-speed on microstructure, precipitation of Al3Sc particles and mechanical properties in Sc- and Zr-modified Al-Mg alloys, Materials & Design, Vol. 140, pp. 134–143 (2018). https://doi.org/10.1016/j.matdes.2017.11.053
[14] Burmistrov, M., Magerramova, L., Grachev, D., Kozin, S., Isakov, V. Application of selective laser melting technology for printing lightweight housing parts from powder magnesium alloy for gas turbine engines, Proceedings ICAM- 2020, Moscow, Russia, May 18–21, pp. 573–575 (2021). ISBN 978-5-94049-053-1
[15] Wessel, W., Smit, M., Al-Hamdanic, K. Clarec, A. Laser powder bed fusion of a Magnesium-SiC metal matrix composite. Proc. CIRP. Vol. 81, pp. 506–511 (2019). URL: https://doi.org/10.1016/j.procir.2019.03.137
[16] Liu, S., Guo, H.-J. A Review of SLMed Magnesium Alloys: Processing, Properties, Alloying Elements and Postprocessing. J. Metals, 10, 1073, pp 1–48 (2020). https://doi.org/10.3390/met10081073
[17] Samuel, A., Zedan, Y., Doty, H., Songmene, V., Samuel, F. A Review Srudy on the Main Sources of Porosity in Al-Si Cast Alloys. Advances in Materials Science and Engineering, Vol. 2021, 1921603 (2021). https://doi.org/10.1155/2021/1921603
[18] Morgunov, Yu., Saushkin, B. Additive technologies for aerospace engineering. Additive Technologies, No. 1. pp. 30–38, 2016
[19] Moghimian, P., Poirié, T., Habibnejad-Korayem, M., et al. Metal powders in additive manufacturing: A review on reusability and recyclability of common titanium, nickel and aluminum alloys. Additive Manufacturing, Vol. 43, 102017 (2021). https://doi.org/10.1016/j.addma.2021.102017
[20] Metal powders of aluminum, magnesium, titanium and silicon. Consumer properties and applications. Edited by the Member of the Faculty of the Russian Academy of Sciences, Prof. Rudsky, A. St. Petersburg: Publishing house of the Polytechnic University. un-ta, 356 p., 2012
[21] Frank, S., Gneiger, S., Neunteufl, E. Wire based additive manufacturing of Mg alloys, 76th Annual IMA World Magnesium Conference, Budapest, Hungary, 2019. Available online: https://www.researchgate.net/publication/336022175, last amended 23/03/2022
[22] GOST 1783-93 «Aluminium casting alloys. Specifications», 1993
[23] Sigmund, O. A 99 line topology optimization code written in Matlab. Structural and Multidisciplinary Optimization, Vol. 21, pp. 120–127 (2001). https://doi.org/10.1007/s001580050176
[24] Sigmund, O., Maute, K. Topology optimization approaches, Structural and Multidisciplinary Optimization, Vol. 48, pp. 1031–1055 (2013). https://doi.org/10.1007/s00158-013-0978-6
[25] Altair HyperWorks User Guide, 2021. Available online: https://community.altair.com/community?id = altair_product_documentation, last amended 23/03/2022
[26] Tyflopoulos, E., Steinert, M. A Comparative Study of the Application of Different Commercial Software for Topology Optimization. Applied Sciences, Vol. 12, 611 (2022). https://doi.org/10.3390/app12020611
[27] Isakov, V. Optimization of the technological process of laser processing from the standpoint of system-synergetic analysis. Izvestia of MSTU, No. 2 (12), pp. 134–139 (2011).
[28] Rykalin, N., Uglov, A., Zuev, I., Kokora, A. Laser and electron-beam processing of materials. Moscow: Mashinostroenie, USSR, 1985, p. 496.
[29] Ankudinov, V., Krivilev, M. Theoretical analysis of the dependence of thermophysical characteristics on porosity. The Bulletin of the Udmurt University/ Physics, Chemistry, Vol. 4, pp. 3–8 (2012).
[30] Dynin, N., Zavodov, A., Oglodkov M., Khasikov, D. Influence of the parameters of the selective laser fusion process on the structure of the aluminum alloy of the Al–Si– Mg system. Proceedings of VIAM: electron. scientific and technical journal, Vol. 10(58), 2017.
[31] Altair University, 2021. Available online: https://altairuniversity.com/inspire-3dprint-2/, last amended 23/03/2022
[32] Magerramova L., Isakov V., Shcherbinina L., Gukasyan S., Petrov M., Povalyukhin D., Volosevich D., Klimova-Korsmik O. Design, simulation and optimization of an additive laser-based manufacturing process for gearbox housing with reduced weight made from AlSi10Mg alloy. Metals 2022, 12(1), 67; https://doi.org/10.3390/met12010067