Shape Sensing and Damage Detection of Thin-Walled Cylinders Using an Inverse Finite Element Method

Authors: Ionel D. Craiu, Mihai Nedelcu

Abstract:

Thin-walled cylinders are often used by the offshore industry as columns of floating installations. Based on observed strains, the inverse Finite Element Method (iFEM) may rebuild the deformation of structures. Structural Health Monitoring uses this approach extensively. However, the number of in-situ strain gauges is what determines how accurate it is, and for shell structures with complicated deformation, this number can easily become too high for practical use. Any thin-walled beam member's complicated deformation can be modeled by the Generalized Beam Theory (GBT) as a linear combination of pre-specified cross-section deformation modes. GBT uses bar finite elements as opposed to shell finite elements. This paper proposes an iFEM/GBT formulation for the shape sensing of thin-walled cylinders based on these benefits. This method significantly reduces the number of strain gauges compared to using the traditional inverse-shell finite elements. Using numerical simulations, dent damage detection is achieved by comparing the strain distributions of the undamaged and damaged members. The effect of noise on strain measurements is also investigated.

Keywords: Damage detection, generalized beam theory, inverse finite element method, shape sensing.

References:

[1] M. Nedelcu, Optimisation of inverse Finite Element Method for shape sensing of thin-walled cylinders by using Generalised Beam Theory, Thin-Walled Structures, 188, 110865, 2023;
[2] A. Tessler, J.L. Spangler, A variational principle for reconstruction of elastic deformation of shear deformable plates and shells, NASA TM-2003-212445, 2003;
[3] A. Tessler, J.L. Spangler, A least-squares variational method for full-field reconstruction of elastic deformations in shear-deformable plates and shells, Comput. Methods Appl. Mech. Eng. 194 (2), 327–339, 2005;
[4] R. Schardt, Verallgemeinerte Technische Biegetheorie, Springer Verlag, Berlin, 1989 (in German);
[5] M. Li, A. Kefal, B.C. Cerik, E. Oterkus, Dent damage identification in stiffened cylindrical structures using inverse Finite Element Method. Ocean Eng 198, 106944, 2020;
[6] A. Kefal, E. Oterkus, A. Tessler, J.L. Spangler, A quadrilateral inverse-shell element with drilling degrees of freedom for shape sensing and structural health monitoring, Engineering Science and Technology an International Journal, vol. 19, Issue 3, September 2016, Pages 1299-1313;
[7] N. Silvestre, Generalised beam theory to analyse the buckling behaviour of circular cylindrical shells and tubes, Thin-Walled Structures, 45 (2), 185–198, 2007;
[8] N. Silvestre, D. Camotim, Non-linear generalized beam theory for cold-formed steel members. Struct. Stab. Dyn. 3 (4), 461–490, 2003;
[9] C. Basaglia, D. Camotim, N. Silvestre, Non-linear GBT formulation for open-section thin-walled members with arbitrary support conditions. Comput. Struct. 89 (21–22), 1906–19, 2011;
[10] ABAQUS Standard (Version 6.3), 2002, Hibbit Karlsson and Sorensen Inc;
[11] MATLAB 2005. Version 7.1.0246 Documentation, The Mathwork Inc.