Rubber Crumbs in Alkali Activated Clay Roof Tiles at Low Temperature
Authors: Aswin Kumar Krishnan, Yat Choy Wong, Reiza Mukhlis, Zipeng Zhang, Arul Arulrajah
Abstract:
The continuous increase in vehicle uptake escalates the number of rubber tyres waste which need to be managed to avoid landfilling and stockpiling. The present research focused on the sustainable use of crumb rubber in clay roof tiles. The properties of roof tiles composed of clay, crumb rubber, NaOH, and Na2SiO3 with 10 wt.% alkaline activator were studied. Tile samples were fabricated by heating the compacted mixtures at 50 °C for 72 hours, followed by a higher heating temperature of 200 °C for 24 hours. The effect of crumb rubber aggregates as a substitution for the raw clay materials were investigated by varying their concentration from 0 wt.% to 2.5 wt.%. X-ray diffraction (XRD) and scanning electron microscopy (SEM) analyses have been conducted to study the phases and microstructures of the samples. It was found that the optimum rubber crumbs concentration was at 0.5 wt.% and 1 wt.%, while cracks and larger porosity were found at higher crumbs concentration. Water absorption, and compressive strength test results demonstrated that rubber crumbs and clay satisfied the standard requirement for the roof tiles.
Keywords: Crumb rubber, clay, roof tiles, alkaline activators.
Procedia APA BibTeX Chicago EndNote Harvard JSON MLA RIS XML ISO 690 PDF Downloads 179References:
[1] N. Yaseen, et al., Sustainable Development and Performance Assessment of Clay-Based Geopolymer Bricks Incorporating Fly Ash and Sugarcane Bagasse Ash. Journal of Materials in Civil Engineering, 34(4), p.04022036(2022).
[2] N. Dalkilic, and A. Nabikoğlu, Traditional manufacturing of clay brick used in the historical buildings of Diyarbakir (Turkey). Frontiers of Architectural Research, 6(3), pp.346-359(2017).
[3] M. Dabaieh, et al., A comparative study of life cycle carbon emissions and embodied energy between sun-dried bricks and fired clay bricks. Journal of Cleaner Production, 275, p.122998(2020).
[4] P.B. Loureco, et al., Handmade clay bricks: chemical, physical, and mechanical properties. International Journal of Architectural Heritage, 4(1), pp.38-58(2010).
[5] P. Chakartnarodom, et al., Properties and performance of the basalt-fiber reinforced texture roof tiles. Case Studies in Construction Materials, 13, p.e00444 (2020).
[6] N. Wang, et al., Autonomous damage segmentation and measurement of glazed tiles in historic buildings via deep learning. Computer‐Aided Civil and Infrastructure Engineering, 35(3), pp.277-291(2020).
[7] S. Liu, et al., Effectiveness of the anti-erosion of an MICP coating on the surfaces of ancient clay roof tiles. Construction and Building Materials; 243:118202(2020).
[8] F. Zakaria, et al., Insulating material based on shredded useds and inexpensive polymers for different roofs. International Journal of Engineering and Technology (UAE), 7(4), pp.1983-1988(2018).
[9] B. Herbudiman, and A.M. Saptaji, Self-compacting concrete with recycled traditional roof tile powder, Procedia Engineering, 54, pp.805-816(2013).
[10] K. Muhamad, et al., April, Influence of rice husk ash (RHA) on performance of green concrete roof tile in application of green building, In IOP Conference Series: Earth and Environmental Science (Vol. 476, No. 1, p. 012038). IOP Publishing(2020).
[11] M.S. Sultana, et al., Utilisation of hard rock dust with red clay to produce roof tiles. Journal of Asian Ceramic Societies, 3(1), pp.22-26(2015).
[12] F.B. Costa, et al., Recycling of glass cullet as aggregate for clays used to produce roof tiles. Materia (Rio de Janeiro), 14(4), pp.1146-1153(2009).
[13] A.M. Radzi, et al., Water absorption, thickness swelling, and thermal properties of roselle/sugar palm fibre reinforced thermoplastic polyurethane hybrid composites. Journal of Materials Research and Technology, 8(5), pp.3988-3994(2019).
[14] J. Li, et al., Surface activation of scrap tire crumb rubber to improve compatibility of rubberised asphalt, Resources, Conservation and Recycling,169:105518(2021).
[15] H.H. Tsang, uses of scrap rubber tires, Rubber: Types, Properties and Uses; Nova Science Publisher: New York, NY, USA, 2013:477-91(2013).
[16] C. Karakurt, Microstructure properties of waste tire rubber composites: an overview. Journal of Material Cycles and Waste Management. 17(3):422-33(2015).
[17] Rubber Manufactures Association, US Scrap tire management summary 2019. Washington(2019).
[18] D. Tang, et al., The reuse of red brick powder as a filler in styrene-butadiene rubber, Journal of Cleaner Production, 10;261:120966(2020).
[19] B.P. Jena, et al., Physical & mechanical characterisation of composites from waste tire rubber crumb, Materials Today: Proceedings, 2020;26:1752-6(2020).
[20] E. Sodupe-Ortega, et al., Evaluation of crumb rubber as aggregate for automated manufacturing of rubberised long hollow blocks and bricks, Construction and Building materials;106:305-16(2016).
[21] J.K. Kim and J.W. Park, The biological and chemical desulfurization of crumb rubber for the rubber compounding. Journal of applied polymer science, 72(12), pp.1543-1549(1999).
[22] L. Wang, et al., Dynamic properties of the mucky clay improved with the steel slag and the rubber particles. Construction and Building Materials; 294:123489(2021).
[23] S.T. Pochron, et al., The response of earthworms (Eisenia fetida) and soil microbes to the crumb rubber material used in artificial turf fields. Chemosphere, 173, pp.557-562(2017).
[24] B.R. Phanikumar and T.V. Nagaraju, Swell and compressibility of GGBS–clay mixes in lumps and powders: effect of 4% lime. Indian Geotechnical Journal(2019).
[25] C.D. Shackelford and F. Javed, Large-scale laboratory permeability testing of a compacted clay soil. Geotechnical Testing Journal;14(2):171-9(1991).
[26] S. Wang, et al., Thermal behaviours of clay mixtures during brick firing: A combined study of in-situ XRD, TGA and thermal dilatometry. Construction and Building Materials; 299:1243192(2021).
[27] K. Khederlou, et al. A mathematical method for XRD pattern interpretation in clay containing nano composites. Applied surface science, 318, pp.90-94(2014).
[28] N. Golsanami, et al. Characterizing clay textures and their impact on the reservoir using deep learning and Lattice-Boltzmann simulation applied to SEM images. Energy, 240, p.122599(2022).
[29] C. Valantin, et al., SEM-EDX analysis and TOF-SIMS 3D imaging of a textile/rubber interface undergoing fatigue loading. Applied Surface Science, 360, pp.623-633(2016).
[30] ASTM C1167/2011, “Standard Specifications for clay roof tiles” (2017).
[31] L. Liu, et al., Evaluation of the compressive strength reducing behavior of concrete containing rubber aggregate. Cleaner Materials, p.100057(2022).
[32] H.A. Hmeid, et al., 2022. Preliminary characterisation and potential use of different clay materials from North-Eastern Morocco in the ceramic industry. Materials Today: Proceedings(2022).
[33] C. Zanelli, et al., Improving the frost resistance of roof tiles beyond current prediction schemes. Open Ceramics, p.100249(2022).
[34] A. Eslami, D. Akbarimehr, Failure analysis of clay soil-rubber waste mixture as a sustainable construction material. Construction and Building Materials, 310, p.125274(2021).
[35] R. Zhang, et al., Influences of different modification methods on surface activation of waste tire rubber powder applied in cement-based materials. Construction and Building Materials, 314, p.125191(2022).
[36] P. Su, et al., Investigation of the mechanical and shrinkage properties of plastic-rubber compound modified cement mortar with recycled tire steel fiber. Construction and Building Materials, 334, p.127391(2022).
[37] S.M.S. Kazmi, et al., Thermal performance evaluation of eco-friendly bricks incorporating waste glass sludge. Journal of Cleaner Production, 172, 1867-1880(2018).
[38] N. Prasad, J. Sudha, An exploratory analysis on prejudice substitute of fine aggregate by glass powder and crumbed rubber on M30 concrete, Materials Today: Proceedings (2020).
[39] J.S. de Faria, et al., Incorporation of unserviceable tire waste in red ceramic. Journal of Materials Research and Technology;8(6):6041-50(2019).
[40] Z. Zhang, et al., Feasibility of producing non-fired compressed masonry units from brick clay mill residues by alkali activation. Journal of Cleaner Production, 306, p.126916.
[41] P. Li, et al., Analysis of physico-chemical properties for crumb rubber in process of asphalt modification. Construction and Building Materials, 138, pp.418-426 (2017).