Tailoring of ECSS Standard for Space Qualification Test of CubeSat Nano-Satellite

Authors: B. Tiseo, V. Quaranta, G. Bruno, G. Sisinni

Abstract:

There is an increasing demand of nano-satellite development among universities, small companies, and emerging countries. Low-cost and fast-delivery are the main advantages of such class of satellites achieved by the extensive use of commercial-off-the-shelf components. On the other side, the loss of reliability and the poor success rate are limiting the use of nano-satellite to educational and technology demonstration and not to the commercial purpose. Standardization of nano-satellite environmental testing by tailoring the existing test standard for medium/large satellites is then a crucial step for their market growth. Thus, it is fundamental to find the right trade-off between the improvement of reliability and the need to keep their low-cost/fast-delivery advantages. This is particularly even more essential for satellites of CubeSat family. Such miniaturized and standardized satellites have 10 cm cubic form and mass no more than 1.33 kilograms per 1 unit (1U). For this class of nano-satellites, the qualification process is mandatory to reduce the risk of failure during a space mission. This paper reports the description and results of the space qualification test campaign performed on Endurosat’s CubeSat nano-satellite and modules. Mechanical and environmental tests have been carried out step by step: from the testing of the single subsystem up to the assembled CubeSat nano-satellite. Functional tests have been performed during all the test campaign to verify the functionalities of the systems. The test duration and levels have been selected by tailoring the European Space Agency standard ECSS-E-ST-10-03C and GEVS: GSFC-STD-7000A.

Keywords: CubeSat, Nano-satellite, shock, testing, vibration.

Digital Object Identifier (DOI): doi.org/10.5281/zenodo.2643923

References:

[1] CubeSats: Tiny Payloads, Huge Benefits for Space Research, https://www.space.com/34324-cubesats.html.
[2] A. Klesh1 and J. Krajewski1, “1Jet Propulsion Laboratory”, in 49th Lunar and Planetary Science Conference 2018, California Institute of Technology, March 2018, (LPI Contrib. No. 2083).
[3] W. A. Shiroma,l. k. Martin, J. M. Akagi, B. L. Wolfe, B. A. Fewell, A. T. Ohta, “CubeSat: A bright Future for Nanosatellite” Central European Journal of Engineering, pp. 9-15, March 2011.
[4] QB50 Mission Objectives, https://www.qb50.eu/index.php/project-description-obj/mission-objectives.html.
[5] J.Bouwmeester, J. Guo, “Survey of Worldwide pico and nanosatellite missions,distributions and subsystem technology”, Acta Astronautica, Vol. 67, pp. 854 - 862, 2010.
[6] M. Langer, Institute of Astronautics, Technical University of Munich, J. Bouwmeester, Faculty of Aerospace Enginnering Delf University of technologies, “Reliability of CubeSats – Statistical Data, Developers’ Beliefs and the Way Forward”, 30th Annual AIAA/USU Conference, March 2016, Germany.
[7] M. Cho, H. Masui, T. Hatamura (KIT), K. Date (IS-INOTEK), S. Horii (SJAC), S. Obata (AstreX)” Status of Micro/Nano satellite environmental Tests Standardization Project: Test Campaign and Standard Draft”, Nanosatellite Symposium, October 2012.
[8] “Introduction of Nanosatellite Environmental Test Standardization (NETS) project, Background and Objectives”, 55th conference on space Technologies, December 2011.
[9] “Tailored ECSS Engineering Standards for In-Orbit Demonstration CubeSat Projects”, ESA Document, Tec-sy/128/2013/spd/rw, issue 1 Rev.3, November 2016.
[10] “CubeSat Design Specification”, Rev. 13, California Polytechnic Sate University, February 2014.
[11] M. Cho, K. Date (IS-INOTEK), S. Horii (SJAC), S. Obata (AstreX).
[12] J. Debes, N. Howard, R. Harrington, R. Cobb, J. Black, “Rapid build and space Qualification of CubeSats”,air force Institute of Technology, 25th AIAA/USU Conference on Small Satellite, August 2011,UT,USA.
[13] “European Cooperation for Space Standardization”, ESA Document, ECSS-E-ST-10-03C, June 1, 2012.
[14] “General Environmental Verification Standard – GEVS”, NASA Goddard Space Flight Center, GEVS-STD-7000, April 2005.