Application of Recycled Tungsten Carbide Powder for Fabrication of Iron Based Powder Metallurgy Alloy

Authors: Yukinori Taniguchi, Kazuyoshi Kurita, Kohei Mizuta, Keigo Nishitani, Ryuichi Fukuda

Abstract:

Tungsten carbide is widely used as a tool material in metal manufacturing process. Since tungsten is typical rare metal, establishment of recycle process of tungsten carbide tools and restore into cemented carbide material bring great impact to metal manufacturing industry. Recently, recycle process of tungsten carbide has been developed and established gradually. However, the demands for quality of cemented carbide tool are quite severe because hardness, toughness, anti-wear ability, heat resistance, fatigue strength and so on should be guaranteed for precision machining and tool life. Currently, it is hard to restore the recycled tungsten carbide powder entirely as raw material for new processed cemented carbide tool. In this study, to suggest positive use of recycled tungsten carbide powder, we have tried to fabricate a carbon based sintered steel which shows reinforced mechanical properties with recycled tungsten carbide powder. We have made set of newly designed sintered steels. Compression test of sintered specimen in density ratio of 0.85 (which means 15% porosity inside) has been conducted. As results, at least 1.7 times higher in nominal strength in the amount of 7.0 wt.% was shown in recycled WC powder. The strength reached to over 600 MPa for the Fe-WC-Co-Cu sintered alloy. Wear test has been conducted by using ball-on-disk type friction tester using 5 mm diameter ball with normal force of 2 N in the dry conditions. Wear amount after 1,000 m running distance shows that about 1.5 times longer life was shown in designed sintered alloy. Since results of tensile test showed that same tendency in previous testing, it is concluded that designed sintered alloy can be used for several mechanical parts with special strength and anti-wear ability in relatively low cost due to recycled tungsten carbide powder.

Keywords: Tungsten carbide, recycle process, compression test, powder metallurgy, anti-wear ability.

Digital Object Identifier (DOI): doi.org/10.5281/zenodo.1127066

References:

[1] P.G. Barnard, A.G. Starliper, H.Kenworthy, “Reclamation of refractory carbides from carbide materials”, US Patent 3595484, 1970.
[2] P. Seegopaul, L. Wu, “Reclamation process for tungsten carbide/cobalt using acid digestion”, US Patent 5728197, 1998.
[3] Y. Ishlda, T. Itakura, H. Morlguchl, A. Ikegaya, “Development of technologies for recycling cemented carbide scrap and reducing tungsten use in cemented carbide tools”, SEI Technical Review, no. 75, pp. 38-46, Oct. 2012.
[4] T. Hayashi, F. Satoh, K. Sasaya, A. Ikegaya, “Industrialization of tungsten recovering from used cemented carbide Tools”, SEI Technical Review, no. 82, pp. 33-38, Apr. 2016.
[5] Japanese Ministry of Economy, Trade and Industry, “Project of salvage enhancement of used tungsten carbide”, Reports on Possibility Investigation for 3Rs Systems, pp.8-13, Mar. 2012(in Japanese).
[6] T. Ono, K. Kamada, M. Nakamura, T. Saitoh, “Production technique and mechanical properties of recycled hard alloy reusing waste hard alloy powder”, Journal of Local Independent Administrative Agency Iwate Industrial Research Institute, vol. 10, pp. 37-40, 2003(in Japanese).
[7] Japanese Ministry of Economy, Trade and Industry, “Project of salvage enhancement of used tungsten carbide”, Reports on Possibility Investigation for 3Rs Systems, pp.19-23, Mar. 2012(in Japanese).
[8] Japan Powder Metallurgy Association, 2015 JPMA Annual Report, pp. 8-10, July 2016.
[9] A. Fujiki, “Present Status of PM Automotive Parts”, Materia Japan, vol. 53, no. 12, pp.608-611, Dec. 2014 (in Japanese).
[10] M.P. Groover, Fundamentals of Modern Manufacturing. 3rd ed., Wiley, 1993, pp. 38–48.