Tuning for a Small Engine with a Supercharger

Authors: Shinji Kajiwara, Tadamasa Fukuoka

Abstract:

The formula project of Kinki University has been involved in the student Formula SAE of Japan (JSAE) since the second year the competition was held. The vehicle developed in the project uses a ZX-6R engine, which has been manufactured by Kawasaki Heavy Industries for the JSAE competition for the eighth time. The limited performance of the concept vehicle was improved through the development of a power train. The supercharger loading, engine dry sump, and engine cooling management of the vehicle were also enhanced. The supercharger loading enabled the vehicle to achieve a maximum output of 59.6 kW (80.6 PS)/9000 rpm and a maximum torque of 70.6 Nm (7.2 kgf m)/8000 rpm. We successfully achieved 90% of the engine’s torque band (4000–10000 rpm) with 50% of the revolutions in regular engine use (2000–12000 rpm). Using a dry sump system, we periodically managed hydraulic pressure during engine operation. A system that controls engine stoppage when hydraulic pressure falls was also constructed. Using the dry sump system at 80 mm reduced the required engine load and the vehicle’s center of gravity. Even when engine motion was suspended by the electromotive force exerted by the water pump, the circulation of cooling water was still possible. These findings enabled us to create a cooling system in accordance with the requirements of the competition.

Keywords: Engine, combustion, cooling system, dry sump system, numerical simulation, power, torque, mechanical supercharger.

Digital Object Identifier (DOI): doi.org/10.5281/zenodo.1123626

References:

[1] Mattarelli, E., Perini, F., and Rinaldini, C., "Optimization of a Supercharged Single Cylinder Engine for a Formula SAE Racing Car," SAE Int. J. Engines 2(1):199-210, 2009.
[2] Attard, W., Watson, H., Konidaris, S., and Khan, M., "Comparing the Performance and Limitations of a Downsized Formula SAE Engine in Normally Aspirated, Supercharged and Turbocharged Modes," SAE Technical Paper 2006-32-0072, 2006.
[3] Claywell, M., Horkheimer, D., and Stockburger, G., "Investigation of Intake Concepts for a Formula SAE Four-Cylinder Engine Using 1D/3D (Ricardo WAVE-VECTIS) Coupled Modeling Techniques," SAE Technical Paper 2006-01-3652, 2006.
[4] Jawad, B., Lounsbery, A., and Hoste, J., "Evolution of Intake Design for a Small Engine Formula Vehicle," SAE Technical Paper 2001-01-1211, 2001, doi:10.4271/2001-01-1211.
[5] Jawad, B., Hoste, J., and Johnson, B., "Intake System Design for a Formula SAE Application," SAE Technical Paper 2001-01-2553, 2001.
[6] Eriksson, J., Lindgren, P., and van Deventer, J., "A Distributed Engine Management System for Formula SAE," SAE Technical Paper 2007-01-1602, 2007.