Fundamental Problems in the Operation of the Automotive Parts Industry Small and Medium Businesses in Bangkok and Surrounding Provinces

Authors: P. Thepnarintra

Abstract:

The purposes of this study were to: 1) investigate operation conditions of SME automotive part industry in Bangkok and vicinity and 2) to compare operation problem levels of SME automotive part industry in Bangkok and vicinity according to the sizes of the enterprises. Samples in this study included 196 entrepreneurs of SME automotive part industry in Bangkok and vicinity derived from simple random sampling and calculation from R. V. Krejcie and D. W. Morgan’s tables. Research statistics included frequency, percentage, mean, standard deviation, and T-test. The results revealed that in general the problem levels of SME automotive part industry in Bangkok and vicinity were high. When considering in details, it was found that the problem levels were high at every aspect, i.e. personal, production, export, finance, and marketing respectively. The comparison of the problem levels according to the sizes of the enterprises revealed statistically significant differences at .05. When considering on each aspect, it was found that the aspect with the statistical difference at .05 included 5 aspects, i.e. production, marketing, finance, personal, and export. The findings also showed that small enterprises faced more severe problems than those of medium enterprises.

Keywords: Automotive part industry, operation problems, SME, perimeter.

Digital Object Identifier (DOI): doi.org/10.5281/zenodo.1110592

References:

[1] A. Nongwongsatien, S. Janthongbai,D.wutpadadon, S. Fharangthong,T. Soodtiwan and C. Pomsa. “Total Intermodal transportation cost affecting transportation mode choice of auto parts industries in Samutprakarn province”. Journal of KMUTNB., vol. 24, no1. , pp. 134-145, Set. – Jan- Apr 2013, (in Thai).
[2] A. Suriwong. “Tooling management in automotive parts industry for QS-9000”. M. P. A.thesis, Division Industrial Engineering, KMUTT, BKK, 2008, (in Thai).
[3] A. Pansuwan.SMEs in the western region. Lecture notes, 2003, in thai.
[4] Alek Sandar Karaev, S. C. Lenny Koh and Leslie T. Szamosi. “The Cluster approach and SME Competitiveness: a Review”. Journal of Manufacturing Technology Management, 2007.
[5] Automotive Institute. National Industrial Development Master Plan. Ministry of Industry.2012,(in Thai).
[6] Ayse Saka-Helmhout and Elif Karabulut.“Institutional Barriers to Entrepreneurship in Clusters”. Evidence from the Turkish Textile. Sector. International Journal of Emerging Market, 2006.
[7] Best, John W. Research in Education. 4th ed. Englewood Cllffs new jersey Prentice Hall Inc,1981.
[8] CIPD. “Employer branding: a no-nonsense Approach”. London: Chartered Institute of Personnel and Development, 2008.
[9] Economy and society. “Office of the National Economic and Social Development Board”. Vol.50, no1, Set. Jan-Feb, 2013, (in Thai).
[10] E. Kongsansatien. “Application of Failure Model FMEA and Effect Analysis in New Product Development for Automotive SMEs Manufacturers A Case Study of Metal Press Manufacturing”. M. P. A. thesis, Faculty of M. B. A, Thai-Nichi Institute of Technology, BKK, 2012, (in Thai).
[11] E. Sunanchai. “Competitive potential according to value chain model of auto part industry in Eastern Seaboard estate of Rayong province”. M.P.A. thesis, Faculty of Science in Industrial Management, KMITL. BKK, 2009, (in Thai).
[12] E. Wisitsombat. “The factor relaed to perceiving the safety system for officers in Production Division of the industrial factory of locomotive parts in Siam Nissan Group to be a case study of K. L. K. Industry Col., Ltd”. M.P.A. thesis, Division of Industrial Technology, PNRU. BKK, 2008, (in Thai).
[13] FTI. APIC. Automotive Component Manufacturers Association of Thailand. And automotive spare partsindustry. http://www.thaiautoparts.or.th/download/Proposal_to_MOI.pdf. 15 Jan 2013, (in Thai).
[14] J.Jindapol. “Guidelines for the management of occupational health and safety in autopart automotive factory”. M.P.A. thesis, Division of Public Health in Industrial Envirornment Management School of Health Science Sukhothai Thammathirat Open University, Nonthaburi, 2008, (in Thai).
[15] Journal Industry .Department of Industry Promotion. Ministry of Industry, Vol.52 no3, Set. Jul-Aug 2013,(in Thai).
[16] K. Suwan. “Factors affecting logistics system management in uncertain economic condition of administrators in auto parts industry in easten industrial area”. M.P.A. thesis, Faculty of Science in Industrial Management, KMITL. BKK, 2009, (in Thai).
[17] K. Boonyean. in an interview Factory manager on 11 Sep 2011. Sakpattanakarnkaset Ladbualong Phra Nakhon Si Ayutthaya, 2011. (in Thai).
[18] K. M. Bartol, and A. Srivastava, Encouraging Knowledge Sharing: The Role of Organizational Studies, vol. 9, no.1, pp.64-76, 2002.
[19] K. M. Wiig, Knowledge Management: Where Did IT Come From and Where Will It Go ,Expert Systems With Applications,vol.13, no. 1, pp. 1-14, 1997.
[20] K. Samanthong. “A study of the problems and needs the help of industry garment”. M.P.A. thesis, Division of Business Administration, KMUTNB, BKK, 2011, (in Thai).
[21] M. Danesin. “Defects Reduction in Spheroidal Graphite Cast Iron in Automotive Parts Manufacturing”. Division of Metallurgical Engineering. Faculty of Engineering, KMUTT. BKK, 2008, (in Thai).
[22] M.Burinok. SMEs automotive part industry. Lecture notes,USUI International Corporation (THA), Ltd., Chonburi, 2012, pp 1-11, in thai.
[23] M. Ragab, and A. Arisha, Knowledge Management and Measurement: A Critical Review, Journal of Knowledge Management, vol.17,no. 6, pp. 873-901, 2013.
[24] N. Ninpetra. “The impact of free trade agreement between Thailand and India on automobile parts industry of Thailand”. M. P. A. thesis, Faculty of economics, KU. BKK, 2008, (in Thai).
[25] N. Niyomyat. “Operational performance evaluation of green supply chain for thai autoparts industry”. M. P. A. thesis, Division of IE, CMU.Chiang Mai, 2013, (in Thai).
[26] N. Tatanang. “Guide to wastewater contamination Donna's chrome parts in the automotive industry”. M. P. A. thesis, Division of Health, STOU. Nonthaburi, 2011, (in Thai).
[27] P. Banjongtcheep. “Compulsory parts produced in the country: a case study in the automotive parts industry”. M.P.A. thesis, Faculty of economics. Thammasat University. BKK, 2008,(in Thai).
[28] P. Petcharat. “A study of Toyota production systems (TPS) in Thai autoparts industry”. Faculty of business administration, DPU. BKK, 2011, (in Thai).
[29] P. Thivashut. “Intelligence activities inspired Recipes”.Guide small business owners. Bangkok: Jareonwit Printing, 2002, (in Thai).
[30] R. Suwannarat. “Impact on trade related investment measures (TRIMS) toward automotive part industry in Thailand”. M. P. A. thesis, Faculty of Science in Industrial Management, KMITL. BKK, 2007, (in Thai).
[31] R. J. Calantone, T. S. Cavusgil, and Y. Zhao, “An Introduction to Signal Detection and Estimation”, Industrial Marketing Management, vol. 31, pp.515-524, 2002.
[32] S. K-Anukamon . “Strategic Management of Automobile & Parts Industry Case study: The Inoue Rubber (Thailand) Public Company Limiited”. M. P. A. thesis, Faculty of economics. RU. BKK, 2004, (in Thai).
[33] S. Yen-udom. “The Effect of Free Trade on Investment Promotion of Automobile Parts in Thailand”. M. P. A. thesis, Faculty of economics. RU. BKK, 2004, (in Thai).
[34] S. Boonta . “Supply chain evaluation of automotive part industry in Thailand”. M. P. A. thesis, Division of Logistics Management, Chulalongkorn University. BKK, 2011, (in Thai).
[35] S. Chamart . “Training module development for automotive part industry employees to reduce defectives in manufacturing processes”. Journal of KMUTNB., vol. 22, no3. , pp. 198-211, Set. – Dec 2012, (in Thai).
[36] S. Kaewploy. “Quality Improvement of Cross Member Assembly Process in the Automotive Parts Industry”. M. P. A. thesis, Division Industrial Engineering, KMUTT, BKK, 2008, (in Thai).
[37] S. Rungkitwattanakul. “The analysis of competitive advantage in automobile industry of Thailand and automobile parts industry with the competitor to Brazil”. M. P. A. thesis, Faculty of economics, KU. BKK, 2011, (in Thai).
[38] S. Udomvejtanan. “Design and development of green supply chain performance measurement system for exported auto part industry”. M. P. A. thesis, Division of IE, CMU. Chiang Mai, 2011, (in Thai).
[39] T. Kruwanjaroen. “An Approach to Develop the Competitiveness of Thailand Auto Parts Industry”. D. P. A. dissertation, Division of Technology Management, BSRU. BKK, 2012, (in Thai).
[40] T. Silpajaru. Research and statistical analysis with SPSS. Nonthaburi, S. Rs. Mass Printing Products Co., Ltd., 2008, (in Thai).
[41] T. Ambler and S. Barrow. “The employer Brand”. Journal of Brand Management, vol. 4, pp. 185-206, 1996.
[42] The challenge of rising economic and business opportunities: 133.Economic and Industrial Trends, 2004, in Thai).
[43] The economy and society. Office of the National Economic and Social Development Board at 42.Issue 1, Jan-Feb, 2005, (in Thai).
[44] The Journal of the industry. Bangkok: Department of Industrial Promotion Ministry of Industry for 48 years. Jul-Aug, 4, 9, 2010, (in Thai).
[45] The Office of Factory Registration, 2010. (in Thai).
[46] The Office of the automotive parts industry Economics. Incooperation with the Customs Department, 2011, (in Thai).
[47] The Office of Industrial Economics. Ministry of Industry, 28-30, 2012, (in Thai).
[48] U. Koson. “Changing transportation's packaging of automotive parts for reduction transportation cost”. M. P. A. thesis, Division of Logistics and Supply Chain Management. BUU. Chonburi, 2011, (in Thai).
[49] W. Dokchan in an interview Managing Director on 19 Dec 2012.World Pumps (THA) Co., Ltd., BKK, 2012. (in Thai).