Influence of Intermediate Principal Stress on Solution of Planar Stability Problems

Authors: M. Jahanandish, M. B. Zeydabadinejad

Abstract:

In this paper, von Mises and Drucker-Prager yield criteria, as typical ones that consider the effect of intermediate principal stress σ2, have been selected and employed for investigating the influence of σ2 on the solution of a typical stability problem. The bearing capacity factors have been calculated under plane strain condition (strip footing) and axisymmetric condition (circular footing) using the method of stress characteristics together with the criteria mentioned. Different levels of σ2 relative to the other two principal stresses have been considered. While a higher σ2 entry in yield criterion gives a higher bearing capacity; its entry in equilibrium equations (axisymmetric) causes substantial reduction.

Keywords: Intermediate principal stress, plane strain, axisymmetric, yield criteria.

Digital Object Identifier (DOI): doi.org/10.5281/zenodo.1110539

References:

[1] P. V. Lade “Assessment of test data for selection of 3-D failure criterion for sand.” Int. J. Numer. Anal. Meth. Geomech, 2006; 30:307–333.
[2] R. O. Davis and A. P. S. Selvadurai, Plasticity and Geomechanics. Cambridge University Press, 2002, 287 p.
[3] H. Tresca, Sur l’ecoulement des corps solids soumis `a de fortes pression, Comptes Rendus Acad. Sci. Paris, 1864, 59, 754.
[4] R. von Mises, Mechanik der festen Koerper im plastisch-deformablen Zustand, Nachr. d. K. Ges. d. Wiss G¨ottingen, Math.-Phys. Kl., 1913, 582–592.
[5] V. G. Solberg “Development and Implementation of Effective Stress Soil Models.” M.Sc. Thesis, Under Supervision of Dr. S. Nordal, Department of Civil and Transport Engineering, Norwegian University of Science and Technology. (2014).188 pp.
[6] G. Vikash, A. Prashant “Calibration of 3-D Failure Criteria for Soils Using Plane Strain Shear Strength Data.” GeoShanghai 2010 International Conference, pp.86-91.
[7] M. E. Harr, Foundation of Theoretical Soil Mechanics. McGraw-Hill, 1966, New York, 381 p.
[8] C. M. Martin, “Exact bearing capacity calculations using the method of characteristics.” Turin 4, 2005, pp. 441-450.
[9] H. Jiang, Y. Xie “A note on the Mohr-Coulomb and Drucker-Prager strength criteria.” Mech. Research Comunications, Vol. 38, 2011, pp. 309-314.
[10] D. C. Drucker, W. Prager, ‘Soil mechanics and plastic analysis or limit design’, Quarterly of applied mathematics 10(2), 157–165. (1952).