Development and Performance Evaluation of a Gladiolus Planter in Field for Planting Corms

Authors: T. P. Singh, Vijay Gautam

Abstract:

Gladiolus is an important cash crop and is grown mainly for its elegant spikes. Traditionally the gladiolus corms are planted manually which is very tedious, time consuming and labor intensive operation. So far, there is no planter available for planting of gladiolus corms. With a view to mechanize the planting operation of this horticultural crop, a prototype of 4-row gladiolus planter was developed and its performance was evaluated in-situ condition. Cupchain type metering device was used to place each single gladiolus corm in furrow at required spacing while planting. Three levels of corm spacing viz 15, 20 and 25 cm and four levels of forward speed viz 1.0, 1.5, 2.0 and 2.5 km/h was taken as evaluation parameter for the planter. The performance indicators namely corm spacing in each row, coefficient of uniformity, missing index, multiple index, quality of feed index, number of corms per meter length, mechanical damage to the corms etc. were determined during the field test. The data was statistically analyzed using Completely Randomized Design (CRD) for testing the significance of the parameters. The result indicated that planter was able to drop the corms at required nominal spacing with minor variations. The highest deviation from the mean corm spacing was observed as 3.53 cm with maximum coefficient of variation as 13.88%. The highest missing and quality of feed indexes were observed as 6.33% and 97.45% respectively with no multiples. The performance of the planter was observed better at lower forward speed and wider corm spacing. The field capacity of the planter was found as 0.103 ha/h with an observed field efficiency of 76.57%.

Keywords: Coefficient of uniformity, corm spacing, gladiolus planter, mechanization.

Digital Object Identifier (DOI): doi.org/10.5281/zenodo.1110395

References:

[1] Mamta Saxena and P. Chander Gandhi, “Indian Horticulture Databas,” Ministry of Agriculture, Government of India, pp. 285, 2014.
[2] Mohammad-H. Saiedi. Rad, “Design and development of a two-row saffron bulb planter,” AMA, vol. 37, no. 2, pp.48-50,2006.
[3] S. D. Katchman and J. A. Smith, “Alternative measure of accuracy in plant spacing for planter using single seed metering,” Trans. ASAE, vol. 38, pp. 379-387, 1995.
[4] R. P. Bracy and R. L. Parish, “Seeding uniformity of precision seeders,” Hort. Technology, vol.8, no. 2, pp.182-185, 1999.
[5] R.P. Bracy, R. L. Parish, and J.E. McCoy, “Precision seeder uniformity varies with theoretical spacing”, Hort. Technology, vol. 9, pp.47-50, 1999.
[6] Ali Musa Bozdoğan, “Seeding uniformity for vacuum precision seeders”, Sci. Agric. (Piracicaba, Braz.) vol.65, no.3, 2008.
[7] R.L. Parish, P.E. Bergeron, and R.P. Bracy, “Comparison of vacuum and belt seeders for vegetable planting”. Applied Engineering in Agriculture, vol.7, pp.537-540, 1991.
[8] J.W. Panning, M.F. Kocher, J.A. Smith and S.D. Kachman, “Laboratory and field testing of seed spacing uniformity for sugarbeet planters”, Applied Engineering in Agriculture, vol.16, pp.7-13, 2000.