Estimation of Hysteretic Damping in Steel Dual Systems with Buckling Restrained Brace and Moment Resisting Frame

Authors: Seyed Saeid Tabaee, Omid Bahar

Abstract:

Nowadays, energy dissipation devices are commonly used in structures. High rate of energy absorption during earthquakes is the benefit of using such devices, which results in damage reduction of structural elements, specifically columns. The hysteretic damping capacity of energy dissipation devices is the key point that it may adversely make analysis and design process complicated. This effect may be generally represented by Equivalent Viscous Damping (EVD). The equivalent viscous damping might be obtained from the expected hysteretic behavior regarding to the design or maximum considered displacement of a structure. In this paper, the hysteretic damping coefficient of a steel Moment Resisting Frame (MRF), which its performance is enhanced by a Buckling Restrained Brace (BRB) system has been evaluated. Having foresight of damping fraction between BRB and MRF is inevitable for seismic design procedures like Direct Displacement-Based Design (DDBD) method. This paper presents an approach to calculate the damping fraction for such systems by carrying out the dynamic nonlinear time history analysis (NTHA) under harmonic loading, which is tuned to the natural system frequency. Two MRF structures, one equipped with BRB and the other without BRB are simultaneously studied. Extensive analysis shows that proportion of each system damping fraction may be calculated by its shear story portion. In this way, contribution of each BRB in the floors and their general contribution in the structural performance may be clearly recognized, in advance.

Keywords: Buckling restrained brace, Direct displacement based design, Dual systems, Hysteretic damping, Moment resisting frames.

Digital Object Identifier (DOI): doi.org/10.5281/zenodo.1108837

References:

[1] Kim J, Seo Y. Seismic design of low-rise steel frames with bucklingrestrained braces. Engineering Structures 2004; 26(5):543–51.
[2] Kim J, Choi H. Behavior and design of structures with bucklingrestrained braces. Engineering Structures 2004; 26(6):693–706
[3] Sahoo DR, Chao SH. Performance-based plastic design for bucklingrestrained braced frames. In: Proceedings of 9th US national and 10th Canadian conference on earthquake engineering. 2010 (in press).
[4] Zhao, J., Wu, B. and Ou, J. (2011), a novel type of angle steel bucklingrestrained brace: Cyclic behavior and failure mechanism. Earthquake Engng. Struct. Dyn, 40: 1083–1102.
[5] Aidcer L. Vidot-Vega, Mervyn J. Kowalsky, Drift, strain limits and ductility demands for RC moment frames designed with displacementbased and force-based design methods, Engineering Structures, Volume 51, June 2013, Pages 128-140
[6] Priestley MJN, Calvi GM, Kowalsky MJ. Displacement-based seismic design of structures. IUSS Press; 2007 (721pp.).
[7] Maley TJ, Sullivan TJ, Della Corte G. Development of a displacementbased design method for steel dual systems with buckling-restrained braces and moment-resisting frames. Journal of Earthquake Engineering 2010; 14(S1): 106–40.
[8] Romero P, Reaveley L, Miller P, Okahashi T (2003) Full-scale testing of WC Series buckling-restrained braces, Department of Civil and Environmental Engineering, University of Utah, USA
[9] ANSI/AISC 360-10, Specification for Structural Steel Buildings, American Institute of Steel Construction, USA 2010.
[10] AISC. ANSI/AISC 341-10. Seismic provisions for structural steel buildings. Chicago (IL): American Institute of Steel Construction; 2010.
[11] Chopra AK, Goel RK. Building period formulas for estimating seismic displacements. Earthquake Spectra 2000; 16(2):533–6.
[12] Jacobsen, L. S. (1930) “Steady forced vibrations as influenced by damping,” ASME Transactione 52(1), 169–181.
[13] Federal Emergency Management Agency. Prestandard and commentary for the seismic rehabilitation of buildings. Report FEMA 356, Washington, DC, 2000.
[14] Garcia, R., Sullivan, T. J., and Della Corte, G. (2009) ‘‘Development of a displacement-based design method for steel frame-RC wall buildings’’ Journal of Earthquake Engineering 14(2), 252–277.
[15] Fabio Mazza, Alfonso Vulcano, 2014. Design of Hysteretic Damped Braces to Improve the Seismic. Ingegneria Sismica. , pp.5-16
[16] ASCE 7-05. Minimum design load for buildings and other structures. Reston (VA): American Society of Civil Engineers; 2005.