Theoretical Modal Analysis of Freely and Simply Supported RC Slabs

Authors: M. S. Ahmed, F. A. Mohammad

Abstract:

This paper focuses on the dynamic behavior of reinforced concrete (RC) slabs. Therefore, the theoretical modal analysis was performed using two different types of boundary conditions. Modal analysis method is the most important dynamic analyses. The analysis would be modal case when there is no external force on the structure. By using this method in this paper, the effects of freely and simply supported boundary conditions on the frequencies and mode shapes of RC square slabs are studied. ANSYS software was employed to derive the finite element model to determine the natural frequencies and mode shapes of the slabs. Then, the obtained results through numerical analysis (finite element analysis) would be compared with the exact solution. The main goal of the research study is to predict how the boundary conditions change the behavior of the slab structures prior to performing experimental modal analysis. Based on the results, it is concluded that simply support boundary condition has obvious influence to increase the natural frequencies and change the shape of the mode when it is compared with freely supported boundary condition of slabs. This means that such support conditions have the direct influence on the dynamic behavior of the slabs. Thus, it is suggested to use free-free boundary condition in experimental modal analysis to precisely reflect the properties of the structure. By using free-free boundary conditions, the influence of poorly defined supports is interrupted.

Keywords: Natural frequencies, Mode shapes, Modal analysis, ANSYS software, RC slabs.

Digital Object Identifier (DOI): doi.org/10.5281/zenodo.1337695

References:

[1] S.C. Dutta, and P. Mukhopadhyay, Improving Earthquake and Cyclone Resistance of Structures: Guidelines for the Indian Subcontinent”, TERI, New Delhi, 2011.
[2] A. E., Abdelnaby, Multiple Earthquake Effects ON Degrading Reinforced Concrete Structures. A thesis submitted for the Degree of Doctor of Philosophy in Civil Engineering in the Graduate College, University of Illinois at Urbana-Champaign, 2012.
[3] S. N. Mokhatar, and R. Abdullah, Computational Analysis of Reinforced Concrete Slabs Subjected to Impact Loads. International Journal of Integrated Engineering, vol. 4, Issue 2, 2012, pp. 70-76.
[4] S. N. Mokhatar, Y. Sonoda, and , Z. M. Jaini, Nonlinear Simulation of Beam Elements Subjected to High Mass Low Velocity Impact Loading using the Smoothed Particle Hydrodynamics (SPH) Method. International Journal of Integrated Engineering, vol. 5, Issue 2, 2013, pp. 37-42.
[5] T. Kabeyasawa, H. Shiohara, S. Otani, and H. Aoyama, Analysis of the Full-scale Seven-story Reinforced Concrete Test Structure. Journal (B), The Faculty of Engineering, University of Tokyo, vol. 37, Issue 2, 1983,pp. 432 – 478.
[6] R. Pinho, and A. S. Elnashai , Dynamic Collapse Testing of A Full-Scale Four Story RC Frame. ISET Journal of earthquake Technology, vol. 37, Issue 4, 2000, pp. 143 - 163.
[7] J. M. M. Silva, and N. M. M. Maia, Modal Analysis and Testing: Proceedings of the NATO Advanced Study Institute, NATO Science Series: E: Applied Science, Sesimbra. 1998.
[8] M.SH. El-Nagar, Static and Dynamic Analysis of Cellular Raft Foundation, Ph.D. Thesis, Faculty of Engineering, Menofia University, 2009.
[9] D. Roylance, Finite Element Analysis. Department of Material Science and Engineering, Massachusetts Institute of Technology Cambridge, MA 02139 .February 28, 2001.
[10] G. C. Martins, J. A. Cordioli, and R. Jordan. An Analysis Of Mesh Parameters Of A Viscothermal Acoustic FE Model. ICSV18, 18th International Congress on Sound and Vibration, Rio De Janero, Brazil, 2011.
[11] R. D. Blevins, Formulas for natural frequency and mode shape. Krieger Pub. California 95327, 2001.