Effect of Drawbar Force on the Dynamic Characteristics of a Spindle-Tool Holder System

Authors: Jui-Pui Hung, Yu-Sheng Lai, Tzuo-Liang Luo, Kung-Da Wu, Yun-Ji Zhan

Abstract:

This study presented the investigation of the influence of the tool holder interface stiffness on the dynamic characteristics of a spindle tool system. The interface stiffness was produced by drawbar force on the tool holder, which tends to affect the spindle dynamics. In order to assess the influence of interface stiffness on the vibration characteristic of spindle unit, we first created a three dimensional finite element model of a high speed spindle system integrated with tool holder. The key point for the creation of FEM model is the modeling of the rolling interface within the angular contact bearings and the tool holder interface. The former can be simulated by a introducing a series of spring elements between inner and outer rings. The contact stiffness was calculated according to Hertz contact theory and the preload applied on the bearings. The interface stiffness of the tool holder was identified through the experimental measurement and finite element modal analysis. Current results show that the dynamic stiffness was greatly influenced by the tool holder system. In addition, variations of modal damping, static stiffness and dynamic stiffness of the spindle tool system were greatly determined by the interface stiffness of the tool holder which was in turn dependent on the draw bar force applied on the tool holder. Overall, this study demonstrates that identification of the interface characteristics of spindle tool holder is of very importance for the refinement of the spindle tooling system to achieve the optimum machining performance.

Keywords: Dynamic stiffness, Drawbar force, Interface stiffness, Spindle-tool holder.

Digital Object Identifier (DOI): doi.org/10.5281/zenodo.1092972

References:

[1] E. Abele, Y. Altintas, C. Brecher, "Machine Tool Spindle Units,” CIRP Annals – Manufacturing Technology, vol. 59, no. 4, pp. 781–802, 2010.
[2] M. Weck, A. Koch, "Spindle-bearing systems for high-speed applications in machine tools,” CIRP Annals-Manufacturing Technology, vol. 42, no. 1, pp. 445–448, 1993.
[3] J. Tlusty, M. Polacek, "The stability of machine tools Against self-excited vibrations in machining,” International research in production engineering. ASME, vol. 1, pp. 465–474, 1963.
[4] J. Tlusty, "Dynamics of high-speed milling,” Trans. ASME, Journal of Engineering for Industry, vol. 108, no. 2, pp. 59–67, 1986.
[5] Y. Altintas, E. Budak, "Analytical prediction of chatter stability lobes in milling,” CIRP Annals – Manufacturing Technology, vol. 44, no. 1, pp. 357–362, 1995.
[6] E. Budak, Y. Altintas, "Analytical prediction of chatter stability in milling - part I: general formulation, part II: application,” Trans. ASME Journal of Dynamic Systems, Measurement and Control, vol. 120, pp. 22–36, 1998.
[7] E. Rivin, "Tooling structure: interface between cutting edge and machine tool,” Annals of CIRP,vol. 49, no. 2, pp. 591–634, 2000.
[8] M. Weck, I. Schubert, "New interface machine tool: hollow shank,” Annals of the CIRP, vol. 4311, pp. 345–348, 1994.
[9] J. Agapiou, E. Rivin, c. Xie, "Tool holder/spindle interfaces for cnc machine tools,” Annals of the CIRP, vol.4411, pp. 383–387, 1995.
[10] E. Rivin, "Influence of tool holder interfaces on tooling performance,” Transactions of NAMRVSME, pp. 173–179, 1993.
[11] T. L. Schmitz, G. S. Duncan, "Receptance coupling for dynamics prediction of assemblies with coincident neutral axes,” Journal of Sound and Vibration, vol. 289, no. 4–5, pp. 1045–1065, 2006.
[12] S. Smith, W. R. Winfough, J. Halley, "The effect of drawbar force on metal removal rate in milling,” CIRP Annals – Manufacturing Technology, vol. 48, no.1, pp. 293–296, 1998.
[13] T. L.Schmitz, R. R. Donaldson, "Predicting high-speed machining dynamics by substructure analysis,” CIRP Annals – Manufacturing Technology, vol. 49, no. 1, pp. 303–308, 2000.
[14] T. L. Schmitz,M. A.Davies, M. D. Kennedy, "Tool point frequency response prediction for high-speed machining by RCSA,” Journal of Manufacturing Science and Engineering, vol. 123, no. 4, pp. 700-707, 2001.
[15] M. Namazi, Y. Altintas, T. Abe, N. Rajapakse, "Modeling and identification of tool holder–spindle interface dynamics,” International Journal of Machine Tools and Manufacture, vol. 47, no. 9, pp. 1333–1341, 2007.
[16] K. Ahmadi, H. Ahmadian, "Modelling machine tool dynamics using a distributed parameter tool–holder joint interface,” International Journal of Machine Tools and Manufacture vol. 47, no. 12–13, pp. 1916–1928, 2007.
[17] E. Budak, A. Erturk, H. N. Ozguven, "A modeling approach for analysis and improvement of spindle-holder-tool assembly dynamics,” CIRP Annals – Manufacturing Technology, vol. 55, no. 1, pp. 369–372, 2006.
[18] A. Erturk, H. N. Ozguven, E. Budak, Analytical modeling of spindle-tool dynamics on machine tools using Timoshenko beam model and receptance coupling for the prediction of tool point FRF,” International Journal of Machine Tools and Manufacture, vol.46, no. 15, pp. 1901–1912, 2006.