Influence of Strengthening with Perforated Steel Plates on the Behavior of Infill Walls and RC Frame

Authors: Eray Ozbek, Ilker Kalkan, S. Oguzhan Akbas, Sabahattin Aykac

Abstract:

The contribution of the infill walls to the overall earthquake response of a structure is limited and this contribution is generally ignored in the analyses. Strengthening of the infill walls through different techniques has been and is being studied extensively in the literature to increase this limited contribution and the ductilities and energy absorption capacities of the infill walls to create non-structural components where the earthquake-induced energy can be absorbed without damaging the bearing components of the structural frame. The present paper summarizes an extensive research project dedicated to investigate the effects of strengthening the brick infill walls of a reinforced concrete (RC) frame on its lateral earthquake response. Perforated steel plates were used in strengthening due to several reasons, including the ductility and high deformation capacity of these plates, the fire resistant, recyclable and non-cancerogenic nature of mild steel, and the ease of installation and removal of the plates to the wall with the help of anchor bolts only. Furthermore, epoxy, which increases the cost and amount of labor of the strengthening process, is not needed in this technique. The individual behavior of the strengthened walls under monotonic diagonal and lateral reversed cyclic loading was investigated within the scope of the study. Upon achieving brilliant results, RC frames with strengthened infill walls were tested and are being tested to examine the influence of this strengthening technique on the overall behavior of the RC frames. Tests on the wall and frame specimens indicated that the perforated steel plates contribute to the lateral strength, rigidity, ductility and energy absorption capacity of the wall and the infilled frame to a major extent.

Keywords: Infill wall, Strengthening, External plate, Earthquake Behavior.

Digital Object Identifier (DOI): doi.org/10.5281/zenodo.1092397

References:

[1] T. C. Triantafillou, "Strengthening of masonry structures using epoxy-bonded FRP laminates,” ASCE J. Compos. Construct., vol. 2, no.2, pp. 96-104, 1998.
[2] G. Ozcebe, U. Ersoy, T. Tankut, E. Erduran, R. S. O. Keskin, and H. C. Mertol, Strengthening of brick infilled RC frames with CFRP. SERU-Structural Engineering Research Unit, Report No. 2003/1, TUBITAK-METU, Ankara, Turkey, 2003.
[3] I. Erdem, U. Akyuz, U. Ersoy, and G. Ozcebe, "An experimental study on two different strengthening techniques for RC frames,” Eng. Struct., vol. 28, no. 13, pp. 1843-1851, 2006.
[4] W. W. El-Dakhakhni, A. A. Hamid, Z. H. R. Hakam, and M. Elgaaly, "Hazard mitigation and strengthening of unreinforced masonry walls using composites,” Compos. Struct., vol. 73, no. 4, pp. 458-477, 2006.
[5] T. C. Triantafillou and C. G. Papanicolaou, "Shear strengthening of reinforced concrete members with textile reinforced mortar (TRM) jackets,” Mater. Struct., vol. 39, no. 1, pp. 93-103, 2006.
[6] T. C. Triantafillou, C. G. Papanicolaou, P. Zissimopoulos, and T. Laourdekis, "Concrete confinement with textile-reinforced mortar jackets,” ACI Struct. J., vol. 103, no. 1, pp. 28-37, 2006.
[7] A. Prota, G. Marcari, G. Fabbrocino, G. Manfredi, and C. Aldea, "Experimental in-plane behavior of tuff masonry strengthened with cementitious matrix-grid composites,” ASCE J. Compos. Constr., vol. 10, no. 3, pp. 223-233, 2006.
[8] C. G. Papanicolaou, T. C. Triantafillou and M. Lekka, "Externally bonded grids as strengthening and seismic retrofitting materials of masonry panels,” Construct. Buil. Mater., vol. 25, no. 2, pp. 504-514, 2011.
[9] L. F. Kahn, "Shotcrete strengthening of brick masonry walls,” ACI Struct. J.,vol. 6, no. 7, pp. 34-40, 1984.
[10] M. A. ElGawady, P. Lestuzzi, and M. Badoux, "Retrofitting of masonry walls using shotcrete,” Proc. New Zealand Soc. Earthq. Eng. Conf., March 2006, Napier, New Zealand.
[11] T. Sevil, M. Baran, T. Bilir, and E. Canbay, "Use of steel fiber reinforced mortar for seismic strengthening,” Constr. and Build. Mat., vol. 25, no. 2, pp. 892-899, 2011.
[12] R. J. Frosch, W. Li, J. O. Jirsa, and M. E. Kreger, "Retrofit of non-ductile moment-resisting frames using precast infill wall panels,” Earthq. Spectra, vol. 12, vol. 4, pp. 741-60, 1996.
[13] M. Baran and T. Tankut, "Experimental study on seismic strengthening of RC frames by precast concrete panels,” ACI Struct. J., vol. 108, no. 2, pp. 227-237, 2011.
[14] İ. B. Topcu, B. Isikdag, O. Tatar, and E. Abi, "Depremde hasar görmüş binaların ferrocement panellerle güçlendirilmesi (in Turkish),” Earthq. Symp., Aug. 2005, Kocaeli, Turkey.
[15] K. M. Amanat, M. M. M. Alam, and M. S. Alam, "Experimental investigation of the use of ferrocement laminates for repairing masonry infilled RC frames,” J. Civ. Eng. (IEB), vol. 35, no. 2, pp. 71-80, 2007.
[16] M. Taghdi, M. Bruneau,and M. Saatcioglu, "Seismic retrofitting of low-rise masonry and concrete walls using steel strips,”ASCE J. Struct. Eng.,vol. 126, no. 9, pp. 1017-1025, 2000.
[17] S. H. Farooq, M. Ilyas, and A. Ghaffar, "Technique for strengthening of masonry wall panels using steel strips,” Asian J. Civ. Eng., vol. 7, no. 6, pp. 621-638, 2006.
[18] E. Ozbek and H. Can, "Dolgu tuğla duvarların çelik profillerle güçlendirilmesi (in Turkish),” J. Fac. Eng. Archit. Gazi Uni., vol. 27, no. 4, pp. 921-929, 2012.
[19] S. Aykac, I. Kalkan, and M. Seydanlioglu, "Strengthening of hollow brick infill walls with perforated steel plates (Accepted for publication),” Earthq. Struct.,to be published.
[20] I. Kalkan, B. Aykac, M. Baran, R. Babayani, and S. Aykac, "Delikli çelik levhalarla güçlendirilmiş dolgu duvarların deprem davranışı (in Turkish),” The Turkish Chamber of Civil Engineers 5th Symp. on Steel Struct. , March 2013, Istanbul, Turkey.