Energy Efficient Construction and the Seismic Resistance of Passive Houses

Authors: Vojko Kilar, Boris Azinović, David Koren

Abstract:

Recently, an increasing trend of passive and low-energy buildings transferring form non earthquake-prone to earthquake-prone regions has thrown out the question about the seismic safety of such buildings. The paper describes the most commonly used thermal insulating materials and the special details, which could be critical from the point of view of earthquake resistance. The most critical appeared to be the cases of buildings founded on the RC foundation slab lying on a thermal insulation (TI) layer made of extruded polystyrene (XPS). It was pointed out that in such cases the seismic response of such buildings might differ to response of their fixed based counterparts. The main parameters that need special designers’ attention are: the building’s lateral top displacement, the ductility demand of the superstructure, the foundation friction coefficient demand, the maximum compressive stress in the TI layer and the percentage of the uplifted foundation. The analyses have shown that the potentially negative influences of inserting the TI under the foundation slab could be expected only for slender high-rise buildings subjected to severe earthquakes. Oppositely it was demonstrated for the foundation friction coefficient demand which could exceed the capacity value yet in the case of low-rise buildings subjected to moderate earthquakes. Some suggestions to prevent the horizontal shifts are also given.

Keywords: Earthquake Response, Extruded Polystyrene (XPS), Low-Energy Buildings, Foundations on Thermal Insulation Layer.

Digital Object Identifier (DOI): doi.org/10.5281/zenodo.1091728

References:

[1] Directive 2010/31/EU of the European parliament and of the council of 19 May 2010 on the energy performance of buildings, 2010.
[2] X. Dequaire, "Passivhaus as a low-energy building standard: contribution to a typology," Energy Efficiency, vol. 5, pp. 377–391, August 2012.
[3] W. Feist, "Life-cycle energy analysis: low-energy house, passive house, self-sufficient house," in International symposium of CIB W67, Vienna, Austria, 1997, pp. 183–190.
[4] W. Feist, Wärmebrücken und Tragwerksplanung - die Grenzen des Wärmebrückenfreien Konstruirens. Darmstadt: Passivhaus Institut, 2007.
[5] V. Kilar, D. Koren, and M. Zbašnik-Senegačnik, "Seismic behaviour of buildings founded on thermal insulation layer," Građevinar, vol. 65, pp. 423–433, 2013.
[6] M. Zbašnik-Senegačnik, "Large buildings built as passive houses," Građevinar, vol. 63, pp. 903–906, 2011.
[7] T. Heidolf and R. Eligehausen, "Design concept for load bearing thermal insulation elements with compression shear bearings," Beton- Und Stahlbetonbau, vol. 108, pp. 179–187, March 2013.
[8] F. Méar, P. Yot, R. Viennois, and M. Ribes, "Mechanical behaviour and thermal and electrical properties of foam glass," Ceramics International, vol. 33, pp. 543–550, 2007.
[9] A. Zegowitz, "Cellular glass aggregate serving as thermal insulation and a drainage layer," in Buildings conference, 2010, pp. 1–8.
[10] V. Kilar, D. Koren, and V. Bokan-Bosiljkov, "Evaluation of extruded polystyrene boards performance – implication for earthquake engineering applications," Submitted for publication in Construction and Building Materials 2014.
[11] A. M. Papadopoulos, "State of the art in thermal insulation materials and aims for future developments," Energy and Buildings, vol. 37, pp. 77–86, January 2005.
[12] S. Vejelis, I. Gnip, S. Vaitkus, and V. Kersulis, "Shear Strength and Modulus of Elasticity of Expanded Polystyrene (EPS)," Materials Science-Medziagotyra, vol. 14, pp. 230–233, 2008.
[13] I. J. Gnip, S. I. Vaitkus, V. I. Kersulis, and S. A. Veyelis, "Deformability of expanded poly styrene under short-term compression," Mechanics of Composite Materials, vol. 43, pp. 433–444, September 2007.
[14] D. Wang and R. J. Bathurst, "Numerical Analysis of Earthquake Load Mitigation on Rigid Retaining Walls Using EPS Geofoam," Open Civil Engineering Journal, vol. 6, 2012.
[15] J. S. Horvath, "The compressible inclusion function of EPS geofoam," Geotextiles and Geomembranes, vol. 15, pp. 77–120, 1997.
[16] I. Y. Gnip, S. Vaitkus, V. Kersulis, and S. Vejelis, "Analytical description of the creep of expanded polystyrene (EPS) under long-term compressive loading," Polymer Testing, vol. 30, pp. 493–500, August 2011.
[17] CEN, "European standard EN 826:1996: Thermal insulating products for building applications - Determination of compression behaviour," ed. Brussels, 1996, p. 15.
[18] CEN, "European standard EN 12090:1997: Thermal insulating products for building applications - Determination of shear behaviour," ed. Brussels, 1997, p. 15.
[19] CEN, "European standard EN 1606:2013: Thermal insulating products for building applications - Determination of compressive creep," ed. Brussels, 2013, p. 15.
[20] F. Bunge and H. Merkel, "Development, testing and application of extruded polystyrene foam (XPS) insulation with improved thermal properties," Bauphysik, vol. 33, pp. 67–72, February 2011.
[21] S. François, M. Schevenels, B. Thyssen, J. Borgions, and G. Degrande, "Design and efficiency of a composite vibration isolating screen in soil," Soil Dynamics and Earthquake Engineering, vol. 39, pp. 113–127, August 2012.
[22] H. Merkel, "Determination of Long-Term Mechanical Properties for Thermal Insulation under Foundations," in Buildings conference, 2004, pp. 1–7.
[23] D. Koren, V. Kilar, and M. Zbašnik Senegačnik, "Seismic safety of passive houses founded on thermal insulation," in 17th International Passive House Conference 2013, Frankfurt am Main, 2013.
[24] D. Koren and V. Kilar, "Seismic vulnerability of the reinforced concrete building structures founded on XPS layer," Submitted for publication in Earthquakes and Structures, An Int’l Journal, 2014.
[25] B. Azinović, D. Koren, and V. Kilar, "The seismic response of low-energy buildings founded on a thermal insulation layer – a parametric study," Submitted for publication in Engineering Structures, 2014.