New Suspension Mechanism Using Camber Thrust for a Formula Car

Authors: Shinji Kajiwara

Abstract:

The basic ability of a vehicle is to “run”, “turn” and “stop”. The safeness and comfort during a drive on various road surfaces and speed depends on the performance of these basic abilities of the vehicle. Stability and maneuverability of a vehicle are vital in automotive engineering. The stability of a vehicle is the ability of the vehicle to revert back to a stable state during a drive when faced with crosswinds and irregular road conditions. Maneuverability of a vehicle is the ability of the vehicle to change direction during a drive swiftly based on the steering of the driver. The stability and maneuverability of a vehicle can also be defined as the driving stability of the vehicle. Since the fossil fueled vehicle is the main type of transportation today, the environmental factor in automotive engineering is also vital. By improving the fuel efficiency of the vehicle, the overall carbon emission will be reduced, thus reducing the effect of global warming and greenhouse gas on the Earth. Another main focus of the automotive engineering is the safety performance of the vehicle, especially with the worrying increase of vehicle collision every day. With better safety performance of a vehicle, every driver will be more confident driving every day. Next, let us focus on the “turn” ability of a vehicle. By improving this particular ability of the vehicle, the cornering limit of the vehicle can be improved, thus increasing the stability and maneuverability factor. In order to improve the cornering limit of the vehicle, a study to find the balance between the steering systems, the stability of the vehicle, higher lateral acceleration and the cornering limit detection must be conducted. The aim of this research is to study and develop a new suspension system that will boost the lateral acceleration of the vehicle and ultimately improving the cornering limit of the vehicle. This research will also study environmental factor and the stability factor of the new suspension system. The double wishbone suspension system is widely used in a four-wheel vehicle, especially for high cornering performance sports car and racing car. The double wishbone designs allow the engineer to carefully control the motion of the wheel by controlling such parameters as camber angle, caster angle, toe pattern, roll center height, scrub radius, scuff, and more. The development of the new suspension system will focus on the ability of the new suspension system to optimize the camber control and to improve the camber limit during a cornering motion. The research will be carried out using the CAE analysis tool. Using this analysis tool we will develop a JSAE Formula Machine equipped with the double wishbone system and also the new suspension system and conduct simulation and conduct studies on the performance of both suspension systems.

Keywords: Automobile, Camber Thrust, Cornering force, Suspension.

Digital Object Identifier (DOI): doi.org/10.5281/zenodo.1091042

References:

[1] Milliken, W. F. Dell’Amico and Rice, R. S., "The Static Directional Stability and Control of Automobile”, SAE Paper, No. 760712, 1976.
[2] Milliken, W. F. and Milliken, D. L., "Race Car Vehicle Dynamics”, SAE International. USA, 1995.
[3] Gillespie, T.D., "Suspensions in Fundamentals of Vehicle Dynamics”, Society of Automotive Engineers, USA, pp.97-117 and pp.237-247, 1992.
[4] Esat, İ, "Genetic Algorithm Based Optimization of a Vehicle Suspension System”, Int. J. Vehicle Design, vol. 21, Nos.2/3, pp.148-160, 1999.
[5] Nozaki, H., Kizu, M., "Consideration of Suspension Mechanism with High Cornering Performance for a Formula Car”, SAE paper, No. 2008-01-0607, 2008.
[6] Esfahani, M., I., M., Mosayebi, M., Pourshams, M. andKeshavarzi, A., "Optimization of Double Wishbone Suspension System with Variable Camber Angle by Hydraulic Mechanism”, World Academy of Science, Engineering and Technology, vol.37, pp.299-307, 2010.
[7] Piyabongkarn, D., Lew, J.,Y., Rajamani, R. andGrogg, J.,A., "Active Driveline Torque-Management Systems”, Control Systems, IEEE, vol.30, No. 4, pp. 86-102, 2010.
[8] Sawase, K. and Sano, Y., "Application of Active Yaw Control to Vehicle Dynamics by Utilizing Driving/Breaking Force”, JSAE Review, Vol. 2, No. 2, pp. 289–295, 1999.
[9] Ma, W., H. and Peng, H., "Worst-Case Vehicle Evaluation Methodology – Examples on Truck Rollover/Jackknifing and Active Yaw Control Systems”, Vehicle System Dynamics: International Journal of Vehicle Mechanics and Mobility, vol. 32, No. 4-5, pp. 389-408, 1999.
[10] Horiguchi, M., Mizuno, A., Jones, M. and Futamura, K., "Active Camber Control”, Proceedings of the FISITA 2012 World Automotive Congress Lecture Notes in Electrical Engineering, Vol. 198, pp. 247-256, 2013.
[11] Atsumi, Y. "Introduce of SH-AWD (Super Handling-All Wheel Drive) System”, Journal-Society of Automotive Engineers of Japan, Vol. 59, No.7, pp.124-126, 2005.
[12] Shibahata, Y. and Tomari, T., "Direct Yaw Control Torque Vectoring”, AutoTechnology, vol. 6, No. 3, pp 34-38, 2006.