Stress Analysis of Laminated Cylinders Subject to the Thermomechanical Loads

Authors: Ş. Aksoy, A. Kurşun, E. Çetin, M. R. Haboğlu

Abstract:

In this study, thermo elastic stress analysis is  performed on a cylinder made of laminated isotropic materials under  thermomechanical loads. Laminated cylinders have many  applications such as aerospace, automotive and nuclear plant in the  industry. These cylinders generally performed under  thermomechanical loads. Stress and displacement distribution of the  laminated cylinders are determined using by analytical method both  thermal and mechanical loads. Based on the results, materials  combination plays an important role on the stresses distribution along  the radius. Variation of the stresses and displacements along the  radius are presented as graphs. Calculations program are prepared  using MATLAB® by authors.

 

Keywords: Isotropic materials, laminated cylinders, thermoelastic stress, thermomechanical load.

Digital Object Identifier (DOI): doi.org/10.5281/zenodo.1090476

References:

[1] B. Krstic, B. Rasuo, D. Trifkovic, I.Radisavljevic, Z. Rajic, M. Dinulovic, "An investigation of the repetitive failure in an aircraft engine cylinder head”, Engineering Failure Analysis, vol. 34, pp. 335–349, 2013.
[2] A. Kawasaki, R. Watanabe, "Concept and P/M fabrication of functionally gradient materials”, Ceramics International, vol. 23, pp. 73–83, 1997.
[3] C. Zhang, S. V. Hoa, "A limit-based approach to the stress analysis of cylindrically orthotropic composite cylinders (0/90) subjected to pure bending”, Composite Structures, vol. 94, pp. 2610–2619, 2012.
[4] Y. V. Tokovyy, C. C. Ma, "Analysis of residual stresses in a long hollow cylinder”, International Journal of Pressure Vessels and Piping”, vol. 88, pp. 248-255, 2011.
[5] R. W. Zimmerman, M. P. Lutz, "Thermal stresses and thermal expansion in a uniformly heated functionally graded cylinder”, Journal of Thermal Stresses, vol. 22, pp. 177–188, 1999.
[6] Y. J. Liu, H. M. Yin "Elastic thermal stresses in a hollow circular overlay/substrate system”, Mechanics Research Communications, vol. 55, pp. 10–17, 2014.
[7] N. H. Zhang, J. Z. Chen, "An alternative model for elastic thermal stresses in two materials joined by a graded layer”, Composites Part B: Engineering, vol. 41, pp. 375–379, 2010.
[8] C. L. Tan, Y. C. Shiah, C. Y. Wang, "Boundary element elastic stress analysis of 3D generally anisotropic solids using fundamental solutions based on Fourier series”, International Journal of Solids and Structures, vol. 50, pp. 2701–2711, 2013.
[9] M. Serati, H. Alehossein, D. J. Williamsa, "Elastic stress analysis of partially loaded hollow discs”, International Journal of Engineering Science, vol. 53, pp. 19–37, 2012.
[10] S. P. Hong, J.H. An, Y.J. Kim, K. Nikbin, P. J. Budden, "Approximate elastic stress estimates for elbows under internal pressure”, International Journal of Mechanical Sciences, vol. 53, pp. 526–535, 2011.
[11] A. M. Malik, E. M. Qureshi, N. U. Dar, I. Khan, "Analysis of circumferentially arc welded thin-walled cylinders to investigate the residual stress fields”, Thin-Walled Structures, vol. 46, pp. 1391– 1401, 2008.
[12] Z.S. Shao, G.W. Ma, "Thermo-mechanical stresses in functionally graded circularhollow cylinder with linearly increasing boundary temperature”, Composite Structures, vol. 83, pp. 259–265, 2008.
[13] A. Ozturk, M. Gulgec, "Elastic–plastic stress analysis in a long functionally graded solid cylinder with fixed ends subjected to uniform heat generation”, International Journal of Engineering Science, vol. 49, pp. 1047–1061, 2011.
[14] O. Sayman, "Analysis of multi-layered composite cylinders under hygrothermal loading”, Composites: Part A, vol. 36, pp. 923–933, 2005.
[15] M. Jabbari, S. Sohrabpour, M. R. Eslami, "Mechanical and thermal stresses in a functionally graded hollow cylinder due to radially symmetric loads”, International Journal of Pressure Vessels and Piping, vol. 79, pp. 493-497, 2002.
[16] Timoshenko SP, Goodier JN. Theory of elasticity. New York: McGraw-Hill; 1970.