Effect of Jet Diameter on Surface Quenching at Different Spatial Locations

Authors: C. Agrawal, R. Kumar, A. Gupta, B. Chatterjee

Abstract:

An experimental investigation has been carried out to study the cooling of a hot horizontal Stainless Steel surface of 3 mm thickness, which has 800±10 C initial temperature. A round water jet of 22 ± 1 oC temperature was injected over the hot surface through straight tube type nozzles of 2.5- 4.8 mm diameter and 250 mm length. The experiments were performed for the jet exit to target surface spacing of 4 times of jet diameter and jet Reynolds number of 5000 -24000. The effect of change in jet Reynolds number on the surface quenching has been investigated form the stagnation point to 16 mm spatial location.  

Keywords: Hot-Surface, Jet Impingement, Quenching, Stagnation Point.

Digital Object Identifier (DOI): doi.org/10.5281/zenodo.1336142

References:

[1] Hatta N., Kokado, J., and Hanasaki, K., Numerical analysis of cooling characteristics for water bar, Transaction of ISIJ, Vol. 23, pp. 555-564, 1983.
[2] Robidou, H., Auracher, H., Gardin, P., and Lebouche, M., Controlled cooling of a hot plate with a water jet, Experimental Thermal and Fluid Science, Vol. 26, pp. 123–129, 2002.
[3] Chen, S.J., Kothari, J., and Tseng, A.A., Cooling of a moving plate with an impinging circular water jet, Experimental Thermal and Fluid Science, Vol. 4, pp. 343-353, 1991.
[4] Garimella, S.V., and Nenaydykh, B., Nozzle geometry effect in liquid jet impingement heat transfer, International Journal of Heat Mass Transfer, Vol. 39, pp. 2915- 2923, 1996.
[5] Sun, H., Ma, C. F., and Nakayama, W., Local characteristics of convective heat transfer from simulated microelectronic chips to impinging submerged round water jets, ASME Journal of Electron Packaging, Vol. 115, pp. 71-77, 1993.
[6] Raj, V.V., experimental investigation on the rewetting of hot horizontal annular channels, International Communication in Heat and Mass Transfer, Vol. 10, pp. 299- 311, 1983.
[7] Mozumder A.K., Monde, M., Woodfield, P.L. and Islam, M.A., Maximum heat flux in relation to quenching of a high temperature surface with liquid jet impingement, International Journal of Heat and Mass Transfer, Vol. 49, pp. 2877–2888, 2006.
[8] Baughn, J. W., Hechanova, A. E., and Yan, X., An experimental study of entrainment effects on the heat transfer from a flat surface to a heated circular impinging jet, ASME Journal of Heat Transfer, Vol. 113, pp 1023-1025, 1991.
[9] Lee J., and Lee S. J., The effect of nozzle configuration on stagnation region heat transfer enhancement of axisymmetric jet impingement, International Journal of Heat and Mass Transfer, Vol. 43, pp. 3497- 3509, 2000.
[10] Chitranjan Agrawal, R. Kumar, A. Gupta, B. Chatterjee, Rewetting and Maximum Surface Heat Flux During Quenching of Hot Surface by Round Water Jet Impingement, International Journal of Heat and Mass Transfer, Vol. 55, pp. 4772-4782, 2012.
[11] Chitranjan Agrawal, R. Kumar, A. Gupta, B. Chatterjee, Determination of Rewetting Velocity during Jet Impingement Cooling of a Hot Surface, Transaction of ASME Thermal Science and Engineering Application, Vol. 5, pp 011007-1-9, 2013.
[12] Chitranjan Agrawal, Ravi Kumar, Akhilesh Gupta, Barun Chatterjee, Determination of Rewetting on Hot Horizontal Surface with Water Jet Impingement through a Sharp Edge Nozzle, International Journal of Thermal Science, Vol. 71, pp 310-323, 2013.
[13] Monde M., Critical heat flux in saturated forced convective boiling on a heated disk with an impinging jet, A new generalized correlation, Wärme- and Stoffübertragung, Vol. 19, pp. 205-209, 1985.
[14] Chitranjan Agrawal, Oisín F. Lyon, Ravi Kumar, Akhilesh Gupta, Darina B. Murray, Rewetting of a hot horizontal surface through mist jet impingement cooling, International journal of Heat and Mass Transfer, vol. 58, pp. 188-196, 2013.
[15] Hall, D. E., Incropera, F.P., and Viskanta, R., Jet impingement boiling from a circular free-surface jet during quenching: part 2—two-phase jet, ASME Journal of Heat Transfer, Vol. 123, pp. 911-917, 2001.
[16] Garimella, S.V., and Rice, R.A., Confined and submerged liquid jet impingement heat transfer, ASME Journal of Heat Transfer, Vol. 117, pp. 871-877, 1995.
[17] Womac, J., Ramadhyani, S., and Incropera, F.P., Correlating equations for impingement cooling of small heat sources with single circular liquid jets, ASME Journal of Heat Transfer, Vol. 115, pp. 106-115, 1993.
[18] Ruch, M.A., and Holman, J.P., Boiling heat transfer to a Freon-113 jet impinging upward onto a flat heated surface, International Journal of Heat and Mass Transfer, Vol. 18, pp. 51-60, 1975.
[19] Monde M., and Katto, Y., Burnout in high heat-flux boiling system with an impinging jet, International Journal of Heat and Mass transfer, Vol. 21, pp. 295-305, 1978.