The Influence of Surface Roughness of Drawbead on Non-Symmetry Deep Drawing Cold Rolled Steel Sheet

Authors: A. Watanapa, S. Torsakul

Abstract:

This study was aimed to explain the influence of surface roughness of the drawbead on non-symmetry deep drawing cold rolled steel sheet to improve the drawability of cold rolled steel sheet. The variables used in this study included semi-circle drawbead with 3 levels of surface roughness which are 6.127 mm Ra, 0.963 mm Ra and 0.152 mm Ra and cold rolled steel sheet according to 3 grades of the JIS standards which are SPCC, SPCE and SPCD with the thickness of 1.0 mm and the blankholder force which is 50% of the drawing force and the depth of 50 mm. According to the test results, when there was the increase in the surface roughness of drawbead, there would be the increase in deep drawing force, especially the SPCC cold rolled steel sheet. This is similar to the increase in the equivalent strain and the wall thickness distribution when the surface roughness of the drawbead increased. It could be concluded that the surface roughness of drawbead has an influence on deep drawing cold rolled steel sheet, especially the drawing force, the equivalent strain and the wall thickness distribution.

Keywords: Drawbead, Deep Drawing, Drawing Force, Equivalent Strain, Surface roughness

Digital Object Identifier (DOI): doi.org/10.5281/zenodo.1063260

References:

[1] K. Lange, Metal Forming Handbook. New York : McGraw-Hill, 1985, ch. 20.
[2] Schuler GmbH, Metal Forming Handbook. Berlin: Springer-Verlag, 1998, ch. 4.
[3] T.S. Yang, "Investigation of the strain distribution with lubrication during the deep drawing process", Tribology International, vol. 43 . pp.1104-1112, Dec. 2010.
[4] C. F. Kuo, and T. P. Ching, "An analysis of drawbead restraining force in the stamping process," International Journal of Machine Tools & Manufacture, Vol.38, pp.827-842, July 1997.
[5] H. Livatyali, M. Firat, B. Gurler, and M. Ozsoy, (2010). "An experimental analysis of drawing characteristic of a dual-phase steel through a round drawbead," Materials and Design. Vol. 31, pp: 1639- 1643, Aug.2010.
[6] M. Samuel, "Influence of drawbead geometry on sheet metal forming," Journal of Materials Processing Technology, vol. 122, pp.94-103, Nov.2001.
[7] H.D. Nine, "Drawbead forces in sheet metal forming, Mechanics of Sheet Metal Forming," Plenum Press, New York, 1978, pp.203.
[8] H. Naceur, Y.Q. Guo, J.Lbatoz, and C.Knopf-Lenoir, "Optimization of restraining force and drawbead design in sheet metal forming process," International Journal of Mechanical Sciences, vol. 43, pp.2407-2434, March 2001.
[9] S. Sodamuk, Formability prediction of automotive parts using forming limit diagrams, Master-s Thesis of Mechanical Engineering, Srinakharinwirot University, Bangkok, pp.34-36. 2007.