Experimental Studies on the Combustion and Emission Characteristics of a Diesel Engine Fuelled with Used Cooking Oil Methyl Esterand its Diesel Blends

Authors: G Lakshmi Narayana Rao, S Sampath, K Rajagopal

Abstract:

Transesterified vegetable oils (biodiesel) are promising alternative fuel for diesel engines. Used vegetable oils are disposed from restaurants in large quantities. But higher viscosity restricts their direct use in diesel engines. In this study, used cooking oil was dehydrated and then transesterified using an alkaline catalyst. The combustion, performance and emission characteristics of Used Cooking oil Methyl Ester (UCME) and its blends with diesel oil are analysed in a direct injection C.I. engine. The fuel properties and the combustion characteristics of UCME are found to be similar to those of diesel. A minor decrease in thermal efficiency with significant improvement in reduction of particulates, carbon monoxide and unburnt hydrocarbons is observed compared to diesel. The use of transesterified used cooking oil and its blends as fuel for diesel engines will reduce dependence on fossil fuels and also decrease considerably the environmental pollution.

Keywords: Combustion characteristics, diesel engine, emission characteristics, used cooking oil.

Digital Object Identifier (DOI): doi.org/10.5281/zenodo.1061368

References:

[1] E. Crabbe, C. Nolasco-Hipolito, G. Kobayashi, K. Sonomoto, and A. Ishizaki, "Biodiesel production from crude palm oil and evaluation of butanol extraction and fuel properties," Process Biochemistry, vol. 37, pp.65-71, 2001.
[2] A. S. Ramadhas, S. Jayaraj, and C. Muraleedharan, "Use of vegetable oils as I.C. Engine fuel- A review," Renewable Energy, vol. 29, pp. 727- 742, 2004.
[3] G. Knothe, and K. R. Steidley, "Lubricity of components of biodiesel and petrodiesel: The origin of biodiesel lubricity," Energy & Fuels, vol. 19, pp. 1192-1200, 2005.
[4] S. Bari, C. W. Yu and T. H. Lim, "Performance deterioration and durability issues while running a diesel engine with crude palm oil," Proc. Instn. Mech. Engrs Part-D J. Automobile Engineering, vol. 216, pp. 785-792, 2002.
[5] F. Ma, and M. A. Hanna, "Biodiesel production: a review," Bioresource Technology, vol. 70, pp. 1-15, 1999.
[6] K. R. Kaufman, and M. Ziejewski, "Sunflower methyl esters for direct injected diesel engines," Trans. ASAE, vol.27, pp.1626-1633, 1984.
[7] F. N. da Silva, A. S. Prata, and J. R.Teixeira, "Technical feasibility assessment of oleic sunflower methyl ester utilizations in diesel bus engines," Energy Conversion and Management, vol. 44, pp. 2857-2878, 2003.
[8] G. L. N. Rao, S. Saravanan, S. Sampath, and K. Rajgopal, "Emission characteristics of a direct injection diesel engine fuelled with bio-diesel and its blends," in Proceedings of the International Conf. on Resource Utilization and Intelligent Systems, India. Allied publishers private limited, 2006, pp. 353-356.
[9] M. A. Kalam, and H. H. Masjuki, Biodiesel from palmoil-an analysis of its properties and potential. Biomass and Bioenergy 2002;23:471 - 479.
[10] S. Puhan, N. Vedaraman, G. Sankaranarayanan, and B. V. B. Ram, "Performance and emission study of mahua oil (madhuca indica oil) ethyl ester in a 4-stroke natural aspirated direct injection diesel engine," Renewable Energy, vol. 30, pp.1269-1278, 2005.
[11] M. M. Azam, A. Waris, N. M. Nahar, "Prospects and potential of fatty acid methyl esters of some non-traditional seed oils for use as biodiesel in India," Biomass and Bioenergy, vol. 29, pp. 293-302, 2005.
[12] H. Raheman, and A. G. Phadatare, "Diesel engine emissions and performance from blends of karanja methyl ester and diesel," Biomass and Bioenergy, vol. 27, pp. 393 -397, 2004.
[13] S. W. Lee, T. Herage, and B. Young, "Emission reduction potential from the combustion of soy methyl ester fuel blended with petroleum distillate fuel," Fuel, vol. 83, pp. 1607-1613, 2004.
[14] G. Labeckas, and S.Slavinskas, "The effect of rapeseed oil methyl ester on direct injection Diesel engine performance and exhaust emissions," Energy Conversion and Management, vol. 47, pp.1954-1967, 2006.
[15] A. S. Ramadhas, S. Jayaraj, and C. Muraleedharan, "Performance and emission evaluation of a diesel engine fueled with methyl esters of rubber seed oil," Renewable Energy, vol. 30, pp.1789-2000, 2005.
[16] A. S. Ramadhas, S. Jayaraj, and C. Muraleedharan, "Biodiesel production from high FFA rubber seed oil," Fuel, vol. 84, pp.335-340, 2005.
[17] M. Mittelbach, B. Pokits, and A. Silberholz, "Diesel fuels derived from vegetable oils, IV: production and fuel properties of fatty acid methyl esters from used frying oil, liquid fuels from renewable resources," in Proceedings of an Alternative Energy Conf., American Society of Agricultural Engineers, 1992; 74-78.
[18] T. B. Reed, M. S. Graboski, and S. Gaur, "Development and commercialization of oxygenated diesel fuels from waste vegetable oils," Biomass and Bioenergy, vol. 3, pp.111-115, 1992.
[19] S. Bari, C. W. Yu, and T. H. Lim, "Effect of injection timing with waste cooking oil as a fuel in a direct injection engine," Proc. Instn. Mech. Engrs Part-D J. Automobile Engineering, vol. 218, pp. 93-104, 2004.
[20] M. J. Nye, T. W. Williamson, S. Deshpande, J. H. Schrader, W. H. Snively, T. P. Yurkewich, and C. L. French, "Conversion of used frying oil to diesel fuel by transesterification: preliminary tests," Journal of the American Oil Chemists- Society, vol. 60, pp. 1598-1601, 1983.
[21] M. Canakci, "The potential of restaurant waste lipids as biodiesel feedstocks," Bioresource Technology, vol. 98, pp. 183-190, 2007.
[22] M. Pugazhvadivu, and K. Jeyachandran, "Investigations on the performance and exhaust emissions of a diesel engine using preheated waste frying oil as fuel", Renewable Energy, vol. 30, pp.2189-2202, 2005.
[23] M. Cetinkaya, Y. Ulusoy, Y. Tekin, and F. Karaosmanoglu, "Engine and winter road test performances of used cooking oil originated biodiesel", Energy Conversion and Management, vol. 46, pp.1279-1291, 2005.
[24] C. Breuer, "The influence of fuel properties on the heat release in D.I. diesel engines," Fuel, vol. 74, pp.1767-1771, 1995.
[25] T. Vaughn, M. Hammill, M. Harris, and A. J. Marchese, "Ignition delay of bio-ester fuel droplets," SAE Paper - 2006-01-3302, Society of Automotive Engineers, 2006.
[26] E. Kinoshita, T. Myo, K. Hamasaki, H. Tajima, and Z. R. Kun, "Diesel combustion characteristics of coconut oil and palm oil biodiesels," SAE Paper - 2006-01-3251, Society of Automotive Engineers, 2006.
[27] S. Sinha, and A. K. Agarwal, "Combustion characteristics of rice bran oil derived biodiesel in a transportation diesel engine," SAE Paper - 2005-26-354, Society of Automotive Engineers, 2005.
[28] K. Hamasaki, E. Kinoshita, H. Tajima, K. Takasaki, and D. Morita, "Combustion characteristics of diesel engines with waste vegetable oil methyl ester," Proceeding of The Fifth International Symposium on Diagnostics and Modeling of Combustion in Internal Combustion Engines, Nagoya 200, pp.410-416.
[29] S. Zheng, M. Kates, M. A. Dubé, and D. D. McLean, "Acid-catalyzed production of biodiesel from waste frying oil," Biomass and Bioenergy, vol. 30, pp. 267-272, 2006.
[30] P. Felizardo, M. J. N. Correia, I. Raposo, J. F. Mendes, R. Berkemeier, and J. M. Bordado, "Production of biodiesel from waste frying oils," Waste Management, vol. 26, pp. 487-494, 2006.
[31] D. Darnoko, and M. Cheryan, "Kinetics of palm oil transesterification in a batch reactor," J. Am. Oil Chem Soc., vol. 77, pp. 1263-1266, 2000.
[32] D. Y. C. Leung, and Y. Guo, "Transesterification of neat and used frying oil: optimization for biodiesel production," Fuel Processing Technology, vol. 87, pp. 883-890, 2006.
[33] Y. Wang, S. Ou, P. Liu, F. Xue, S. Tang, "Comparison of two different processes to synthesize biodiesel by waste cooking oil, Journal of Molecular Catalysis A: Chemical, vol. 252, pp. 107-112, 2006.
[34] B. D. Hsu, "Heat release, relative cycle efficiency, and peak cylinder pressure", in Practical Diesel Engine Combustion Analysis, 1st ed., Warrendale, PA, Society of Automotive Engineers Inc., 2002, pp. 21-26.