The Defects Reduction in Injection Molding by Fuzzy Logic based Machine Selection System

Authors: S. Suwannasri, R. Sirovetnukul

Abstract:

The effective machine-job assignment of injection molding machines is very important for industry because it is not only directly affects the quality of the product but also the performance and lifetime of the machine as well. The phase of machine selection was mostly done by professionals or experienced planners, so the possibility of matching a job with an inappropriate machine might occur when it was conducted by an inexperienced person. It could lead to an uneconomical plan and defects. This research aimed to develop a machine selection system for plastic injection machines as a tool to help in decision making of the user. This proposed system could be used both in normal times and in times of emergency. Fuzzy logic principle is applied to deal with uncertainty and mechanical factors in the selection of both quantity and quality criteria. The six criteria were obtained from a plastic manufacturer's case study to construct a system based on fuzzy logic theory using MATLAB. The results showed that the system was able to reduce the defects of Short Shot and Sink Mark to 24.0% and 8.0% and the total defects was reduced around 8.7% per month.

Keywords: Injection molding machine, machine selection, fuzzy logic, defects in injection molding, matlab.

Digital Object Identifier (DOI): doi.org/10.5281/zenodo.1059873

References:

[1] M. T. Tabucanon, D. N. Batanov, and D. K. Verma, "Decision support system for multicriteria machine selection for flexible manufacturing systems," Computers in Industry, vol. 25, 1994, pp. 131-143.
[2] Y. T. Iç and M. Yurdakul, "Development of a decision support system for machining center selection," Expert Systems with Applications, vol. 36, 2009, pp. 3505-3513.
[3] Z. C. Lin, and C. B. Yang, "Evaluation of machine selection by the AHP method," Journal of Materials Processing Technology, vol. 57, 1996, pp. 253-258.
[4] M. C. Arslan, B. Çatay, and E. Budak, "A decision support system for machine tool selection," Journal of Manufacturing Technology Management, vol. 15, no. 1, 2004, pp. 101-109.
[5] E. Çimren, B. Çatay, and E. Budak, "Development of a machine tool selection system using analytic hierarchy process," in 4th CIRP 0 500 1000 1500 2000 2500 3000 3500 Short Shot Sink Mark Defected Product (pieces) Defect Type Current System Proposed System International Seminar on Intelligent Computation in Manufacturing Engineering, 2004.
[6] R. V. Rao, "Decision making in the manufacturing environment-using graph theory and fuzzy multiple attribute decision making methods," Machine selection in a flexible manufacturing cell, Springer-Verlag, London, 2007, pp. 139-148.
[7] T. C. Chu and Y. C. Lin, "A fuzzy TOPSIS method for robot selection," International Journal of Advanced Manufacturing Technology, vol. 21, 2003, pp. 284-290.
[8] H. S. Byun and K. H. Lee, "A decision support system for the selection of a rapid prototyping process using the modified TOPSIS method," International Journal of Advanced Manufacturing Technology, vol. 26, 2005, pp. 1338-1347.
[9] S. Önüt, S. S. Kara, and T. Efendigil, "A hybrid fuzzy MCDM approach to machine tool selection," Journal of Intelligence Manufacturing, vol. 19, 2008, pp. 443-453.
[10] H. M. S. Lababidi and C. G. J. Baker, "An expert system for dryer selection using fuzzy logic," Computers and Chemical Engineering Supplement, 1999, pp. 691-694.
[11] T. Y. Wang, C. F. Shaw, and Y. L. Chen, "Machine selection in flexible manufacturing cell: A fuzzy multiple attribute decision-making approach," International Journal of Production Research, vol. 38, no. 9, 2000, pp. 2079-2097.
[12] A. S. Hanna, and W. B. Lotfallah, "A fuzzy logic approach to the selection of cranes," Automation in Construction. vol. 8, 1999, pp. 597- 608.
[13] V. Subramaniam, G. K. Lee, T. Ramesh, G. S. Hong, and Y. S. Wong, "Machine selection rules in a dynamic job shop," International Journal of Advanced Manufacturing Technology, vol. 16, no. 12, 2000, pp. 902- 908.
[14] V. Subramaniam, T. Ramesh, and A. S. Raheja, "Exploiting the flexibility of multiple job routes in a Dynamic Job Shop," Studies in informatics and control, vol. 11, no. 2, 2002, Publishing House of the National Institute for R&D in Informatics, ICI Bucharest.
[15] T. Al-Hawari, S. Khrais, O. Al-Araidah, and A. F. Al-Dwairi, "2D laser scanner selection using fuzzy logic," Expert Systems with Applications, 2010.
[16] O. Kulak, M. B. Durmuşoğlu, and C. Kahraman, "Fuzzy multi-attribute equipment selection based on information axiom," Journal of Materials Processing Technology, vol. 169, 2005, pp. 337-345.
[17] I. T Tanev, T. Uozumi, and Y. Morotome, "Hybrid evolutionary algorithm-based real-world flexible job shop scheduling problem: application service provider approach," Applied Soft Computing, vol. 5, 2004, pp. 87-100.
[18] N. Nagarur, P. Vrat, and W. Duongsuwan, "Production planning and scheduling for injection moulding of pipe fittings: A case study," International Journal of Production Economics, vol. 53, 1997, pp. 157- 170.
[19] J. Huang, G. A. S├╝er, and S. B. R. Urs, "Genetic algorithm for rotary machine scheduling with dependent processing times," Journal of Intelligence Manufacturing, 2011.
[20] D. Cao, M. Chen, and G. Wan, "Parallel machine selection and job scheduling to minimize machine cost and job tardiness," Computers & Operations Research, vol. 32, 2005, pp. 1995-2012.
[21] M. J. Gordon, Total quality process control for injection molding, 2nd edition, NJ John Wiley & Sons, Inc., 2010.
[22] C. Nakason, Plastic processing, Prince of Songkla University, 3rd edition, Bangkok: Four Press, 2004. (In Thai)
[23] J. Lin, and R. J. Lian, "Self-organizing fuzzy controller for injection molding machines," Journal of Process Control, vol. 20, 2010, pp. 585- 595.
[24] J. Bown, Injection molding of plastic components, United Kingdom: Mcgraw-Hill, 1979.
[25] J. Yen, R. Langari and L.A. Zadeh, Industrial applications of fuzzy logic and intelligent systems, New York, USA, 1994.
[26] T. J. Ross, Fuzzy logic with engineering applications, 3rd Edition, Chichester: John Wiley & Sons, Ltd., 2010.
[27] H. Jiang, R. Browning, and H. J. Sue, "Understanding of scratchinduced damage mechanisms in polymers," Polymer, vol. 50, 2009, pp. 4056-4065.