Identification of Individual Objects at the Intelligent Assembly Cell

Authors: Ružarovský, Roman, Danišová, Nina, Velíšek, Karol

Abstract:

In this contribution is presented a complex design of individual objects identification in the workplace of intelligent assembly cell. Intelligent assembly cell is situated at Institute of Manufacturing Systems and Applied Mechanics and is used for pneumatic actuator assembly. Pneumatic actuator components are pneumatic roller, cover, piston and spring. Two identification objects alternatives for assembly are designed in the workplace of industrial robot. In the contribution is evaluated and selected suitable alternative for identification – 2D codes reader. The complex design of individual object identification is going out of intelligent manufacturing systems knowledge. Intelligent assembly and manufacturing systems as systems of new generation are gradually loaded in to the mechanical production, when they are removeing human operation out of production process and they also short production times.

Keywords: system, cell, intelligent, mechanics, device

Digital Object Identifier (DOI): doi.org/10.5281/zenodo.1331307

References:

[1] N. Danišová, E. Hrušková, K.Velíšek,:"Application of sequential diagrams in manufacturing assembly cell." In: Annals of DAAAM and Proceedings of DAAAM Symposium. - ISSN 1726-9679. - Vol. 20, No. 1 Annals of DAAAM for 2009 & Proceedings of the 20th international DAAAM symposium "Intelligent manufacturing & automation: Focus on theory, practice and education" 25 - 28th November 2009, Vienna, Austria. - Vienna : DAAAM International Vienna, 2009. - ISBN 978-3- 901509-70-4, s. 0199-0200
[2] N. Danišová, K. Velíšek, P. Košťál "Automated tool changing system in the intelligent manufacturing and assembly cell." In: ISCCC 2009 : Proceedings of the 2009 International Symposium on Computing, Communication and Control, October 9-11, 2009, Singapore. - Singapore : International Association of Computer Science and Information Technology Press, 2009. - ISBN 978-9-8108-3815-7. - S. 1- 8
[3] N. Dani┼íov├í, R. Zvolensk├¢, K. Vel├¡┼íek, "Design additional check station with intelligent camera syste" registrovan├¢ v ISI Proceedings.In: Annals of DAAAM and Proceedings of DAAAM Symposium. - ISSN 1726- 9679. - Vol. 19, No.1. Annals of DAAAM for 2008 & Proceedings of the 19th International DAAAM Symposium "Intelligent Manufacturing & Automation: Focus on Next Generation of Intelligent Systems and Solutions", 22-25th October 2008, Trnava, Slovakia. - Viedeň : DAAAM International Vienna, 2008. - ISBN 978-3-901509-68-1, s.
[4] A. Mudriková, P. Košťál, M. Matúšová, "Building of a production system program control laboratory" In: Annals of DAAAM and Proceedings of DAAAM Symposium. - ISSN 1726-9679. - Vol. 20, No. 1 Annals of DAAAM for 2009 & Proceedings of the 20th international DAAAM symposium "Intelligent manufacturing & automation: Focus on theory, practice and education" 25 - 28th November 2009, Vienna, Austria. - Vienna : DAAAM International Vienna, 2009. - ISBN 978-3- 901509-70-4, s. 0603-0604
[5] F. Pecháček, A. Javorová, " A computer based design manufacturing system." In: MicroCAD 2009 : Section M: Production Engineering and Manufacturing Systems. XXIII. International Scientific Conference, 19- 20 March 2009, Miskolc. - Miskolc : University of Miskolc, 2009. - ISBN 978-963-661-878-0. - S. 175-180
[6] P. Ko┼í┼Ñ├íl, M. Mat├║┼íov├í, M. Charbulov├í, "Clamping fixtures in cell manufacturing"registrovan├¢ v ISI Proceedings. In: Annals of DAAAM and Proceedings of DAAAM Symposium. - ISSN 1726-9679. - Vol. 19, No.1. Annals of DAAAM for 2008 & Proceedings of the 19th International DAAAM Symposium "Intelligent Manufacturing & Automation: Focus on Next Generation of Intelligent Systems and Solutions", 22-25th October 2008, Trnava, Slovakia. - Viedeň : DAAAM International Vienna, 2008. - ISBN 978-3-901509-68-1, s. 0721-0722
[7] J. Majerík,Š. Bajčík, "CAD/CAM systems aid by computer", 2008, Strojárstvo, Vol. 12, No. 11, 2008, p. 108 - 109, ISSN 1335-2938
[8] J. Nov├íkov├í., L. Petřkovsk├í., J. Brychta , D. Stan─ìekov├í. 2009. "Influence of Cutting Parameters on Integrity Surface at High Speed Cuttin". Transactions of the V┼áB - Technical University of Ostrava. Mechanical Series, 2009, ro─ìn├¡k LV., ─ì├¡slo 1/2009, ─îesk├í republika. Ostrava : V┼áB - TUO, 2009, s. 203 - 209. ISBN 978-80-248-2051-4.
[9] Z. Godavov├í, K, J. Majer├¡k, ÔÇ×Mechatronic Product Proporcionality and Inter-Changeability Management: Mechanical Components", November 25-28,2009, In: Annal of DAAAM for 2009&Proceedings of the 20th International DAAAM Symposium Intelligent Manufacturing & Automation: Focus on Theory, Practice and Education : World Symposium. - ISSN 1726-9679. - Vienna: Vienna University of Technology, 2009. - ISBN 978-3-901509-70-4. - p.1933-1934.
[10] K. Vel├¡┼íek, S. ┼áebeňov├í and R. Ružarovsk├¢: Transport systems in flexible manufacturing. In: I. Central European Conference on Logistics : 26 November 2010, Miskolc, Hungary. - Miskolc : University of Miskolc, 2010. - ISBN 978-963-661-946-6. -
[5]
[11] R. Ružarovsk├¢, ┼á. Horv├íth and K. Vel├¡┼íek: Utilization of design method for model proposition of automated assembly device in IAC. In: CEURSIS 2010 : The International Conference of the Carpathian Euro- Region Specialists in Industrial Systems. 8th Edition. 12-14 May, 2010 Baia Mare, Romania. - Baia Mare: North University of Baia Mare, 2010. - ISBN 978-606-536-094-5. - S. 257-262
[12] F. Pech├í─ìek, R. Ružarovsk├¢ and R. Zvolensk├¢: Application of design methodology in automated disassembly process. - ─ìl├ínok uverejnen├¢ v mimoriadnom ─ì├¡sle 2010 Web ─ìasopisu MTF STU Materials Science and technology, str. 42-48. In: Stretnutie ├║stavov a katedier v├¢robn├¢ch strojov a robotiky 2010. - Trnava : AlumniPress, 2010. - ISBN 978-80- 8096-124-4. - S. 1-6
[13] A. Mudriková and M. Charbulová: Material flow in flexible manufacturing cell. In: AMO Conference. - ISSN 1313-4264. - 10. International conference, 27 - 29 June 2010 AMO 10, 27 June - 01 July 2010 CEEPUS (2010), s. 1-9