Experimental Study of the Extraction of Copper(II) from Sulphuric Acid by Means of Sodium Diethyldithiocarbamate (SDDT)

Authors: S.Touati, A.H. Meniai

Abstract:

The present work presents the extraction of copper(II) from sulphuric acid solutions with Sodium diethyldithiocarbamate (SDDT), and six different organic diluents: Dichloromethane, Chloroform, Carbon tetrachloride, Toluene, xylene and Cyclohexane, were tested. The pair SDDT/Chloroform showed to be the most selective in removing the copper cations, and hence was considered throughout the experimental study. The effects of operating parameters such as the initial concentration of the extracting agent, the agitation time, the agitation speed and the acid concentration were considered. For an initial concentration of Cu (II) of 63 ppm in a 0.5 M sulphuric acid solution, both with a mass of the extracting agent of 20 mg, an extraction percentage of about 97.8 % and a distribution coefficient of 44.42 were obtained, respectively, confirming the performance of the SDDT-Chloroform pair.

Keywords: Copper (II), Distribution coefficient, Extraction, SDDT, Sulphuric acid.

Digital Object Identifier (DOI): doi.org/10.5281/zenodo.1058835

References:

[1] Martin Jean Valéry., " Purification d-Acide Sulfurique Résiduaire Par Précipitation de Métaux Lourds", PhD thesis, Paris 6 France,1999.
[2] Skoog, West and Holler., Chimie Analytique, 7th ed, de boeck, Italy, pp 570-571,.2003
[3] Mendham, Denney, Barnes, Thomas, Analyse Chimique Quantitative De Vogel, 6th ed, de boeck, Belgium, 2006..
[4] Simpson J, Navarro P and Alguacil FJ, " Iron(III) extraction by LIX 860 and its influence on copper(II) extraction from sulphuic solutions ", Hydrometallurgy, vol 42, pp. 13-20, 1996.
[5] M. A . Didi, A . Elias, M . Attou, Science et technologie des agents extractants organophosphores , Office des publications universitaires,. Algeria, 2004.
[6] Sceney C. G., Smith J. F., Hill J. O. and Magee R. J., "A TG/GC/MS study of copper dimethyl and diethyldithiocarbamates ",J. Thermal Analysis, vol 9, pp. 415-423, 1976.
[7] Zygmunt Marczeuka and Maria Balcerzak., Separation, preconcentration and spectrophotometry in inorganique analysis, Elsevier, Netherlands, pp.177-180, 2000.
[8] Robert H. Perry, Don Green, Perry-s Chemical Engineers Hand Book, 6th ed, McGrow Hill, NY, 1987.
[9] Oteniel D, Sant-Ana, Luciene S. Jesuino, j. Cassella, Marcelos. Carvalho and Ricardo E. Santelli, "Solid Phase extraction of Cu(II) as Diethyldithiocarbamate (DDTC) complex by polyurethane Foam", J.Braz, Chem. Soc, Vol 14, no 5, 728-733, 2003.
[10] Jose, J. Melanie, Baird, J. Michael, Hepp, F. Aloysius, Duffy, V.Norman, "Thermogravimetric analysis studies of iron (III) dithiocarbamates", American Chemical Society, vol 69,110-115, 2007
[11] Duffy, Norman V, "Ligand exchange in tris(diorganodithiocarbamato) iron (III) complexes", Inorganica Chimica Acta, vol 47, no 1, pp 5-31, 1981.