Evaluation of Stiffness and Damping Coefficients of Multiple Axial Groove Water Lubricated Bearing Using Computational Fluid Dynamics

Authors: Neville Fernandes, Satish Shenoy B., Raghuvir Pai B., Rammohan S. Pai B, Shrikanth Rao.D

Abstract:

This research details a Computational Fluid Dynamics (CFD) approach to model fluid flow in a journal bearing with 8 equispaced semi-circular axial grooves. Water is used as the lubricant and is fed from one end of the bearing to the other, under pressure. The geometry of the bearing is modeled using a commercially available modeling software GAMBIT and the flow analysis is performed using a dedicated CFD analysis software FLUENT. The pressure distribution in the bearing clearance is obtained from FLUENT for various whirl ratios and is used to calculate the hydrodynamic force components in the radial and tangential direction of the bearing. These values along with the various whirl speeds can be used to do a regression analysis to determine the stiffness and damping coefficients. The values obtained are then compared with the stiffness and damping coefficients of a 3 Axial groove water lubricated journal bearing and those obtained from a FORTRAN code for a similar bearing.

Keywords: CFD, multiple axial groove, Water lubricated, Stiffness and Damping Coefficients.

Digital Object Identifier (DOI): doi.org/10.5281/zenodo.1057269

References:

[1] Shelly, P., and Ettles, C., "Solutions for the load capacity of journal bearings with oil grooves, Holes, Reliefs or Chamfers in Non - optimum positions," Proceedings of the Institution of Mechanical Engineers., C56/71, pp.38-46, 1871.
[2] Chen, P.Y.P., and Hahn, E.J., "Use of Computational Fluid Dynamics in Hydrodynamic Lubrication," Journal of Engineering Tribology, Institute of Mechanical Engineers., Part J, Vol. 212, pp.427-439, 1998.
[3] Majumdar, B.C., Pai, R., and Hargreaves, D. J., "Analysis of water lubricated Journal Bearings with Multiple axial grooves," Journal of Engineering Tribology., Institute of Mechanical Engineers., Part J, Vol. 218 pp.135-146, 2003.
[4] Pai, R., Hargreaves, D.J., and Brown, R., "Modeling of fluid flow in a 3-axial groove water bearing using computational fluid dynamics," 14th Australian fluid Mechanics conference, Adelaide University, Adelaide, Australia, 2001.
[5] Pai, R., and Majumdar, B.C., "Stability of submerged oil film journal bearings under dynamic load" WEAR, Vol. 146, pp. 125-135, 1991.
[6] Vijayaraghavan, D. and Keith, T.G., 1992, "Effect of Type and Location of Oil Groove on the Performance of Journal Bearings," Tribology Trans, 35, 98-106.