Outer-Brace Stress Concentration Factors of Offshore Two-Planar Tubular DKT-Joints

Authors: Mohammad Ali Lotfollahi-Yaghin, Hamid Ahmadi

Abstract:

In the present paper, a set of parametric FE stress analyses is carried out for two-planar welded tubular DKT-joints under two different axial load cases. Analysis results are used to present general remarks on the effect of geometrical parameters on the stress concentration factors (SCFs) at the inner saddle, outer saddle, toe, and heel positions on the main (outer) brace. Then a new set of SCF parametric equations is developed through nonlinear regression analysis for the fatigue design of two-planar DKT-joints. An assessment study of these equations is conducted against the experimental data; and the satisfaction of the criteria regarding the acceptance of parametric equations is checked. Significant effort has been devoted by researchers to the study of SCFs in various uniplanar tubular connections. Nevertheless, for multi-planar joints covering the majority of practical applications, very few investigations have been reported due to the complexity and high cost involved.

Keywords: Offshore jacket structure, Parametric equation, Stress concentration factor (SCF), Two-planar tubular KT-joint

Digital Object Identifier (DOI): doi.org/10.5281/zenodo.1056819

References:

[1] M. Efthymiou and S. Durkin, "Stress concentrations in T/Y and gap/overlap K-joints," in Proc. Behavior of Offshore Structures, Delft, 1985, pp. 429-440.
[2] M. Efthymiou, "Development of SCF formulae and generalized influence functions for use in fatigue analysis," in Proc. OTJ 88, Surrey, 1988.
[3] UK Health and Safety Executive, "OTH 354: Stress concentration factors for simple tubular joints- assessment of existing and development of new parametric formulae," Prepared by Lloyd-s Register of Shipping, 1997.
[4] F. Gao, Y. B. Shao, and W. M. Gho, "Stress and strain concentration factors of completely overlapped tubular joints under lap brace IPB load," J. Constr. Steel Res., vol. 63, pp. 305-316, 2007.
[5] E. Chang and W. D. Dover, "Parametric equations to predict stress distributions along the intersection of tubular X and DT-joints," Int. J. Fatigue, vol. 21, pp. 619-635, 1999.
[6] Y. B. Shao, "Proposed equations of stress concentration factor (SCF) for gap tubular K-joints subjected to bending load," Int. J. Space Struct., vol. 19, pp. 137-147, 2004.
[7] H. Ahmadi and M. A. Lotfollahi-Yaghin, "Geometrical effect on the stress distribution along the weld toe for tubular KT-joints under balanced axial loading," in Proc. 8th International Conference on Coasts, Ports and Marine Structures (ICOPMAS), Tehran, 2008.
[8] Y. B. Shao, Z. F. Du, and S. T. Lie, "Prediction of hot spot stress distribution for tubular K-joints under basic loadings," J. Constr. Steel Res., vol. 65, pp. 2011-2026, 2009.
[9] M. A. Lotfollahi-Yaghin and H. Ahmadi, "Effect of geometrical parameters on SCF distribution along the weld toe of tubular KT-joints under balanced axial loads," Int. J. Fatigue, vol. 32, pp. 703-719, 2010.
[10] S. A. Karamanos, A. Romeijn, and J. Wardenier, "Stress concentrations in multi-planar welded CHS XX-connections," J. Constr. Steel Res., vol. 50, pp. 259-282, 1999.
[11] S. P. Chiew, C. K. Soh, T. C. Fung, and A. K. Soh, "Numerical study of multiplanar tubular DX-joints subject to axial loads," Comput. Struct., vol. 72, pp. 746-761, 1999.
[12] S. P. Chiew, C. K. Soh, and N. W. Wu, "General SCF design equations for steel multiplanar tubular XX-joints," Int. J. Fatigue, vol. 22, pp. 283-293, 2000.
[13] A. M. Wingerde, J. A. Packer, and J. Wardenier, "Simplified SCF formulae and graphs for CHS and RHS K- and KK-connections," J. Constr. Steel Res., vol. 57, pp. 221-252, 2001.
[14] S. A. Karamanos, A. Romeijn, and J. Wardenier, "SCF equations in multi-planar welded tubular DT-joints including bending effects," Mar. Struct., vol. 15, pp. 157-173, 2002.
[15] C. O. Woghiren and F. P. Brennan, "Weld toe stress concentrations in multi planar stiffened tubular KK Joints," Int. J. Fatigue, vol. 31, pp. 164-172, 2009.
[16] UK Health and Safety Executive, "OTH 91 353: Stress concentration factors for tubular complex joints" Prepared by Lloyd-s Register of Shipping, 1992.
[17] Swanson Analysis Systems Inc., ANSYS user-s manual, 2007.
[18] American Welding Society (AWS), "Structural welding code, AWS D 1.1:2002," Miami FL (USA): American Welding Society Inc., 2002.
[19] P. Smedley and P. Fisher, "Stress concentration factors for simple tubular joints," in Proc. Int. Offshore and Polar Eng. Conf. (ISOPE), Edinburgh, 1991.
[20] M. R. Morgan and M. M. K. Lee, "Prediction of stress concentrations and degrees of bending in axially loaded tubular K-joints," J. Constr. Steel Res., vol. 45, pp. 67-97, 1997.
[21] A. N-Diaye, S. Hariri, G. Pluvinage, and Z. Azari, "Stress concentration factor analysis for notched welded tubular T-joints," Int. J. Fatigue, vol. 29, pp. 1554-1570, 2007.
[22] IIW-XV-E, "Recommended fatigue design procedure for welded hollow section joints", IIW Docs., XV-1035-99/XIII-1804-99, International Institute of Welding, France, 1999.
[23] UK Department of Energy, "Background notes to the fatigue guidance of offshore tubular joints," London (UK): HMSO, 1983.
[24] Bomel Consulting Engineers, "Assessment of SCF equations using Shell/KSEPL finite element data," C5970R02.01 REV C, 1994.