Molecular Dynamics Simulation of Lubricant Adsorption and Thermal Depletion Instability

Authors: Bei Li, Qiu B. Chen, Chee H. Wong

Abstract:

In this work, we incorporated a quartic bond potential into a coarse-grained bead-spring model to study lubricant adsorption on a solid surface as well as depletion instability. The surface tension density and the number density profiles were examined to verify the solid-liquid and liquid-vapor interfaces during heat treatment. It was found that both the liquid-vapor interfacial thickness and the solid-vapor separation increase with the temperatureT* when T*is below the phase transition temperature Tc *. At high temperatures (T*>Tc *), the solid-vapor separation decreases gradually as the temperature increases. In addition, we evaluated the lubricant weight and bond loss profiles at different temperatures. It was observed that the lubricant desorption is favored over decomposition and is the main cause of the lubricant failure at the head disk interface in our simulations.

Keywords: Depletion instability, Lubricant film, Thermal adsorption, Molecular dynamics (MD).

Digital Object Identifier (DOI): doi.org/10.5281/zenodo.1056519

References:

[1] J. Zhou., Y. S. Ma, B. Liu, Q. F. Leng, M. Matsumoto and J. G. Xu, "Flying height-attitude observation and investigation of sliders in load/unload process,"IEEE Transactions on Magnetics, vol. 38, pp. 2123-2125, 2002.
[2] S. H. Charap, P. L. Lu and Y. J. He, "Thermal stability of recorded information at high densities,"IEEE Transactions on Magnetics, vol. 33, pp. 978-983, 1997.
[3] M. H. Kryder, E. C. Gage, T. W. McDaniel, W. A. Challener, R. E. Rottmayer, G. P. Ju, Y. T. Hsia and M. F. Erden, "Heat assisted magnetic recording,"Proceedings of the Ieee,vol. 96, pp. 1810-1835, 2008.
[4] W. A. Challener, C. B. Peng, A. V. Itagi, D. Karns, W. Peng, Y. G. Peng, X. M. Yang, X. B. Zhu, N. J. Gokemeijer, Y. T. Hsia, G. Ju, R. E. Rottmayer, M. A. Seigler and E. C. Gage, "Heat-assisted magnetic recording by a near-field transducer with efficient optical energy transfer,"Nature Photonics, vol. 3, pp. 220-224, 2009.
[5] L. Wu, "Modelling and simulation of the lubricant depletion process induced by laser heating in heat-assisted magnetic recording system," Nanotechnology, vol. 18, pp. 215702, 2007.
[6] N. Tagawa, R. Kakitani, H. Tani, N. Iketani and I. Nakano, "Study of lubricant depletion induced by laser heating in thermally assisted magnetic recording systems-effect of lubricant film materials," IEEE Transactions on Magnetics, vol. 45, pp. 877-882, 2009.
[7] N. Tagawa, H. Andoh and H. Tani, "Study on lubricant depletion induced by laser heating in thermally assisted magnetic recording systems: effect of lubricant thickness and bonding Ratio," Tribology Letters, vol. 37, pp. 411-418, 2010.
[8] Y. Li, C. H. Wong, B. Li, S. Yu, W. Hua and W. Zhou, "Lubricant evolution and depletion under laser heating: a molecular dynamics study," Soft Matter, vol. 8, pp. 5649-5657, 2012.
[9] P. S. Chung, H. G. Chen and M. S. Jhon, "Molecular dynamics simulation of binary mixture lubricant films," Journal of Applied Physics, vol. 103, pp. 07F526-3, 2008.
[10] C. H. Wong, B. Li, S. K. Yu, W. Huaand W. D. Zhou, "Molecular dynamics simulation of lubricant redistribution and transfer at near-contact head-disk interface," Tribology Letters, vol. 43, pp. 89-99, 2011.
[11] M. J. Stevens, "Interfacial fracture between highly cross-linked polymer networks and a solid surface: effect of interfacial bond density," Macromolecules, vol. 34, pp. 2710-2718, 2001.
[12] M. Tsige and M. J. Stevens, "Effect of cross-linker functionality on the adhesion of highly cross-linked polymer networks: amolecular dynamics study of epoxies," Macromolecules, vol. 37, pp. 630-637, 2004.
[13] K. Kremer and G. S. Grest, "Dynamics of entangled linear polymer melts: a molecular-dynamics simulation," The Journal of Chemical Physics, vol. 92, pp. 5057-5086, 1990.
[14] J. G. Kirkwood and F. P. Buff, "Thestatisticalmechanicaltheoryof surface tension," Journal of Chemical Physics, vol. 17, pp. 338-343, 1949.
[15] D. Stansfield, "The surface tensions of liquid argon and nitrogen," Proceedings of the Physical Society, vol. 72, pp. 854-866, 1958.
[16] J. W. Cahn and J. E. Hilliard, "Free energy of a nonuniform system. I. interfacial free energy," The Journal of Chemical Physics, vol. 28, pp. 258-267, 1958.
[17] F. P. Buff, R. A. Lovett and F. H. J. Stillinger, "Interfacial density profile for fluids in the critical region," Physical Review Letters, vol. 15, pp. 621-623, 1965.
[18] P. Orea, Y. Duda, V. C. Weiss, W. Schroer and J. Alejandre, "Liquid-vapor interface of square-well fluids of variable interaction range," Journal of Chemical Physics, vol. 120, pp. 11754-11764, 2004.
[19] R. Ji, T. K. L. Dao, B. X. Xu, J. W. Xu, B. L. Goh, E. Tan, H. Q. Xie and T. Liew, "Lubricant pickup under laser irradiation," IEEE Transactions on Magnetics, vol. 47, pp. 1988-1991, 2011.