Vickers Indentation Simulation of Buffer Layer Thickness Effect for DLC Coated Materials

Authors: Abdul Wasy, Balakrishnan G., Yi Qi Wang, Atta Ur Rehman, Jung Il Song

Abstract:

Vickers indentation is used to measure the hardness of materials. In this study, numerical simulation of Vickers indentation experiment was performed for Diamond like Carbon (DLC) coated materials. DLC coatings were deposited on stainless steel 304 substrates with Chromium buffer layer using RF Magnetron and T-shape Filtered Cathodic Vacuum Arc Dual system The objective of this research is to understand the elastic plastic properties, stress strain distribution, ring and lateral crack growth and propagation, penetration depth of indenter and delamination of coating from substrate with effect of buffer layer thickness. The effect of Poisson-s ratio of DLC coating was also analyzed. Indenter penetration is more in coated materials with thin buffer layer as compared to thicker one, under same conditions. Similarly, the specimens with thinner buffer layer failed quickly due to high residual stress as compared to the coated materials with reasonable thickness of 200nm buffer layer. The simulation results suggested the optimized thickness of 200 nm among the prepared specimens for durable and long service.

Keywords: Thin film, buffer layer. Diamond like Carbon, Vickers indentation, Poisson's ratio, Finite element.

Digital Object Identifier (DOI): doi.org/10.5281/zenodo.1055641

References:

[1] A. C. Ferrari et al., "Elastic constants of tetrahedral amorphous carbon films by surface Brillouin scattering", Appl. Phys. Lett. vol. 75, pp. 1893-1895, 1999.
[2] M. Bonelli1 et al., "Structure and mechanical properties of low stress tetrahedral amorphous carbon films prepared by pulsed laser deposition" Eur. Phys. J. B 25, pp. 269-280, 2002.
[3] Clapa M, Batory D., "Improving adhesion and wear resistance of carbon coatings using Ti:C gradient layers", Journal of Achievements in Materials and Manufacturing Engineering, 20(1/2), pp. 415−418, 2007.
[4] Mikula J, Dobrzanski L A., "PVD and CVD coating systems on oxide tool ceramics", Journal of Achievements in Materials and Manufacturing Engineering, 24(2), pp. 75−78, 2007.
[5] Hetrmanczyk M, Swadzba L. and Mendala B., "Advanced materials and protective coatings in aero-engines application" Journal of Achievements in Materials and Manufacturing Engineering, 24(1): pp. 372−381, 2007.
[6] Zalounina A, Andreasen J H., "Theoretical analysis of fatigue crack growth in a coated substrate", International Journal of Fracture, 2005, 133(1), pp. 3−10.
[7] Chakravarthy S S, Jordan E H. and Chiu W K S., "Thin film and substrate cracking under the influence of externally applied loads" Engineering Fracture Mechanics, 2005, 72(8) pp. 1286−1298.
[8] Romeo A, Ballarini R., "A crack very close to a biomaterial interface", Journal of Applied Mechanics, 62(3), pp. 614−619, 1995.
[9] Smith G A, Jennett N. and Housden J., "Adhesion of thin coatings ÔÇö The VAMAS (TWA 22-2) inter laboratory exercise", Surface and Coatings Technology, 197(2/3), pp. 336−344, 2005.
[10] Xie Chang-Jin, Tong Wei., "Cracking and decohesion of a thin Al2O3 film on a ductile Al-5%Mg substrate", Acta Materialia, 53(2) pp. 477−485, 2005.
[11] Karl, E. R., Komvopoulos, K. and Bogy D.B., "Elastic-Plastic Finite Element Analysis of Repeated Indentation of Half-Space by Rigid Sphere", Trans. ASME, Journal of Applied Mechanics, vol.60, No.4, pp. 829-841, 1993.
[12] Talijat, B., Zacharia,T., and Kosel, F., "New Analytical Procedure to Determine Stress-Strain Curve From Spherical Indentation Data", Int. J. Solids Structures, Vol.35, No.33, pp. 4411-4426, 1998.
[13] H.F.Wang and H.Bangert. "Three dimensional finite element simulation of Vickers indentation on coated systems", Mater. Sic. and Engng, A163, pp.43-50, 1993.
[14] Murakami, K. and Matsuda, K., "Analysis of Vickers hardness by the finite element method", Trans. Japan Society of Mechanical Eng., vol.A57, No.539, pp.1665-1673, 1991.
[15] Munawar Iqbal et al, "Design modification in rotor blade of turbo molecular pump", Nuclear Instruments and Methods in Physics Research Section A, vol. 678, pp. 88-90, 2012.
[16] Xiang Yu et al., "Structural, mechanical and frictional properties of tetrahedral amorphous carbon film by filtered cathodic vacuum arc system" Surface & Coatings Technology 201, pp. 4995-4998, 2007.
[17] H. Mori, H. Tachikawa, "Increased adhesion of diamond-like carbon-Si coatings and its tribological" Surface and Coating Technology, 149: pp.225-230, 2002.
[18] Spear and Dismukes, "Synthetic Diamond - Emerging CVD Science and Technology" Wiley, 1994 NY.ISBN 978-0-471-53589-8.
[19] "Diamond", Mindat. Retrieved, 2009.
[20] Adonias Ribeiro Franco Jr et al., "The use of a Vickers indenter in depth sensing indentation for measuring elastic modulus and Vickers hardness" Mat. Res. vol.7 no.3 São Carlos July/Sept. 2004.