Finite Element Application to Estimate Inservice Material Properties using Miniature Specimen

Authors: G. Partheepan, D.K. Sehgal, R.K. Pandey

Abstract:

This paper presents a method for determining the uniaxial tensile properties such as Young-s modulus, yield strength and the flow behaviour of a material in a virtually non-destructive manner. To achieve this, a new dumb-bell shaped miniature specimen has been designed. This helps in avoiding the removal of large size material samples from the in-service component for the evaluation of current material properties. The proposed miniature specimen has an advantage in finite element modelling with respect to computational time and memory space. Test fixtures have been developed to enable the tension tests on the miniature specimen in a testing machine. The studies have been conducted in a chromium (H11) steel and an aluminum alloy (AR66). The output from the miniature test viz. load-elongation diagram is obtained and the finite element simulation of the test is carried out using a 2D plane stress analysis. The results are compared with the experimental results. It is observed that the results from the finite element simulation corroborate well with the miniature test results. The approach seems to have potential to predict the mechanical properties of the materials, which could be used in remaining life estimation of the various in-service structures.

Keywords: ABAQUS, finite element, miniature test, tensileproperties

Digital Object Identifier (DOI): doi.org/10.5281/zenodo.1055523

References:

[1] J. R. Foulds, and Viswanathan, R, "Determination of the toughness of in-service steam turbine disks using small punch testing," Journal of Materials Engineering and Performance, vol. 10, no. 5, pp.614-619, 2001.
[2] G. E. Lucas, "Review of small specimen test techniques for irradiation testing," Metallurgical Transactions A, vol. 21A, pp. 1105-1119, 1990.
[3] F. M. Huang, M. L. Hamilton, and G. L. Wire, "Bend testing for miniature disks," Nuclear Technology, vol. 57, pp. 234-242, 1982.
[4] X. Mao, and H. Takahashi, "Development of a further-miniaturized specimen of 3 mm diameter for TEM disk small punch tests," Journal of Nuclear Materials, vol. 150, no. 1, pp. 42-52, 1987.
[5] X. Mao, T. Shoji, and H. Takahashi, "Characterization of fracture behavior in small punch test by combined recrystallization-etch method and rigid plastic analysis," Journal of Testing and Evaluation, vol. 15, no. 1, pp. 30-37, 1987.
[6] P. S. Kullen, H. H. Smith, and D. J. Michel, "The shear punch measurement of the mechanical properties of selected unirradiated and irradiated alloys," Journal of Nuclear Materials, vol. 58, pp. 57- 63, 1987.
[7] R. K. Pandey, S. Bhowmick, "Studies on miniature test technique for the assessment of residual life," in Proc. of Trends in mechanical engineering Education and Research. 11th ISME conference, IIT Delhi, India, pp 542-547, 1999.
[8] A. Husain, "Determination of Mechanical Behaviour of Materials Using Miniature Specimen Test Technique and finite Element Method," PhD Thesis, Indian Institute of Technology, Delhi, India, 2003.
[9] G. Partheepan, D. K. Sehgal, and R. K. Pandey, "An inverse finite element algorithm to identify constitutive properties using dumb-bell miniature specimen," Modelling And Simulation in Materials Science and Engineering, vol. 14, pp 38-50, 2006.
[10] M. P. Manahan, A. S. Argon, and O. K. Harling, "Miniaturized disk bend test techniques-development and application," ASTM STP 888, pp. 17-49, 1981.
[11] M. P. Manahan, A. S. Argon, and O. K. Harling, "The development of a miniaturized disk bend test for the determination of post irradiation mechanical properties," Journal of Nuclear Materials, vol. 103-104, pp. 1545-1550, 1981.
[12] M. P. Manahan, "A new post irradiation mechanical behavior test-the miniaturized disk bend test," Nuclear Technology, vol. 63, pp. 295- 315, 1983.
[13] J. S. Cheon, and I. S. Kim, "Evaluation of thermal aging embrittlement in CF8 duplex stainless steel by small punch test," Journal of Testing and Evaluation, vol. 24, no. 4, pp. 255-262, 1996.
[14] A. Husain, D. K. Sehgal, and R. K. Pandey, "An inverse finite element procedure for the determination of constitutive tensile behavior of materials using miniature specimen," Computational Materials Science, vol. 31, pp. 84-92, 1984.
[15] G. Partheepan, "Determination of mechanical properties of materials using newly developed dumb-bell shaped miniature specimen and numerical techniques," PhD Thesis, Indian Institute of Technology, Delhi, India, 2006.
[16] G. Partheepan, D. K. Sehgal, and R. K. Pandey, "Design and usage of a simple miniature specimen test setup for the evaluation of mechanical properties," International Journal of Microstructure and Material Properties, vol. 1, no. 1, pp 38-50, 2005.
[17] K. Hibbit and Sorensen Inc. ABAQUS Users Manual vol. I-II, version 6.3, 2003, USA.