Fluid Flow Analysis and Design of a Flow Distributor in a Domestic Gas Boiler Using a Commercial CFD Software

Authors: Lukasz Peronski, Roy Bratley, Derek B. Ingham, Lin Ma, Mohamed Pourkashanian, StephenTaylor

Abstract:

The aim of the study was to investigate the possible use of commercial Computational Fluid Dynamics (CFD) software in the design process of a domestic gas boiler. Because of the limited computational resources some simplifications had to be made in order to contribute to the design in a reasonable timescale. The porous media model was used in order to simulate the influence of the pressure drop characteristic of particular elements of a heat transfer system on the water-flow distribution in the system. Further, a combination of CFD analyses and spread sheet calculations was used in order to solve the flow distribution problem.

Keywords: CFD, domestic gas boilers, flow distribution, heatexchanger, porous media

Digital Object Identifier (DOI): doi.org/10.5281/zenodo.1084810

References:

[1] General metrology - Part 4: Practical guide to measurement uncertainty (PD 6461-4:2004) British Standard Institution (BSI) 20 August 2004
[2] General metrology - Part 3: Guide to the expression of uncertainty in measurement (GUM) (PD 6461-4:2004) British Standard Institution (BSI) 13 June 2003 (page61);
[3] Perry, R.H., J. O. Maloney, D. W Green, Perry's chemical engineers' handbook. 7th ed. 1999, New York: McGraw-Hill. p. 6-21; p. 6-32 ├À 6- 34.
[4] Bejan, A., A.D. Kraus, and Knovel (Firm), Heat transfer handbook. 2003, J. Wiley: New York. p. xiv, 1480 p.
[5] Rohsenow, W.M., J.P. Hartnett, and Y.I. Cho, Handbook of heat transfer. 1997, McGraw-Hill: London. p. 1600p.
[6] Kays, W.M. and A.L. London, Compact heat exchangers. 3rd ed. 1998, Malabar, Florida: Krieger Publishing Company. 335p.
[7] Sahin, H.M., A.R. Dal, and E. Baysal, 3-D Numerical study on the correlation between variable inclined fin angles and thermal behavior in plate fin-tube heat exchanger. Applied Thermal Engineering, 2007. 27(11-12): p. 1806-1816.
[8] Taler, D., Determination of heat transfer correlations for plate-fin-andtube heat exchangers. Heat and Mass Transfer, 2004. Volume 40(10).
[9] Erek, A., B. Ozerdem, L. Billir, Z. Ilken, Effect of geometrical parameters on heat transfer and pressure drop characteristics of plate fin and tube heat exchangers. Applied Thermal Engineering, 2005. 25(14-15): p. 2421-2431
[10] Sundén, B., Computational Fluid Dynamics in Research and Design of Heat Exchangers. Heat Transfer Engineering, 2007. 28(11): p. 898 - 910.
[11] Fluent 6.2 User-s Guide section 7.19.6; 7.19.2