Recovering the Clipped OFDM Figurebased on the Conic Function

Authors: Linjun Wu, Shihua Zhu, Xingle Feng

Abstract:

In Orthogonal Frequency Division Multiplexing (OFDM) systems, the peak to average power ratio (PAR) is much high. The clipping signal scheme is a useful method to reduce PAR. Clipping the OFDM signal, however, increases the overall noise level by introducing clipping noise. It is necessary to recover the figure of the original signal at receiver in order to reduce the clipping noise. Considering the continuity of the signal and the figure of the peak, we obtain a certain conic function curve to replace the clipped signal module within the clipping time. The results of simulation show that the proposed scheme can reduce the systems? BER (bit-error rate) 10 times when signal-to-interference-and noise-ratio (SINR) equals to 12dB. And the BER performance of the proposed scheme is superior to that of kim's scheme, too.

Keywords: Orthogonal Frequency Division Multiplexing, Peak-to-Average Power Ratio, clipping time, conic function.

Digital Object Identifier (DOI): doi.org/10.5281/zenodo.1080876

References:

[1] S.H. Muller and J.B. Huber, "OFDM with reduced peak-to-average power ratio by optimum combination of partial transmit sequences," Electronics Letters, 27th Feb. 1997,Vol.33, No. 5, pp.368-369.
[2] Marco Breiling, Stefan H. M├╝ller-Weinfurtner, and Johannes B. Huber, "SLM Peak-Power Reduction Without Explicit Side Information," IEEE Communications Letters, Vol. 5, No. 6, June 2001, pp.239-241.
[3] Brian Scott Krongold and Douglas L. Jones, "PAR Reduction in OFDM via Active Constellation Extension," IEEE Trans. on Broadcasting, VOL. 49, NO. 3, Sep. 2003, pp.258-269.
[4] J.A. Davis and J. Jadwab, "Peak-to-mean power control and error correction for OFDM transmission using Golay sequences and Reed-Muller codes," Electronics Letters, 13th Feb. 1997, Vol.33, No. 4, pp.267-268.
[5] Dukhyun Kim and Gordon L. Stuber, "Clipping Noise Mitigation for OFDM by Decision-Aided Reconstruction," IEEE Communications Letters, Vol. 3, No. 1, Jan. 1999, pp.4-6.
[6] Xia Lei, Youxi Tang, Shaoqian Li, "A Minimum Clipping Power Loss Scheme for Mitigating the Clipping Noise in OFDM," GLOBECOM 2003, p.6-9.
[7] Hidekei Ochiai and Hideki Imai, "Channel Capacity of Clipped OFDM systems," ISIT 2000, Sorrento, Italy, June 25-30, 2000, p.219.
[8] Hideki Ochiai and Hideki Imai, "Performance Analysis of Deliberately Clipped OFDM Signals," IEEE Transactions on Communications, VOL. 50, NO. 1, JANUARY 2002, pp.89-101.
[9] P. Van Eetvelt, G. Wade and M. Tomlinson, "Peak to average power reduction for OFDM scheme by selective scrambling," Electronics letters, 10th October 1996, Vol.32, No.21.