The Influence of the Fin Set-up to the Cooling Output of the Floor Heating Convector

Authors: F. Lemfeld, K. Frana

Abstract:

This article deals with the numerical simulation of the floor heating convector in 3D. Presented convector can operate in two modes – cooling mode and heating mode. This initial numerical simulation is focused on cooling mode of the convector. Models with different temperature of the fins are compared and three various shapes of the fins are examined as well. The objective of the work is to predict air flow and heat transfer inside convector for further optimalization of these devices. For the numerical simulation was used commercial software Ansys Fluent.

Keywords: Cooling output, floor heating convector, numericalsimulation, optimalization.

Digital Object Identifier (DOI): doi.org/10.5281/zenodo.1075873

References:

[1] T. Kuppan, Heat Exchangers Design Handbook, Taylor & Francis Group, New York, 2000, pp.1 - 20,
[2] F. Lemfeld, Numerical simulation of the floor heating convector, Power System Engineering & Fluid Flow, Pilsen, Czech Republic 2011
[3] F. Lemfeld, The influence of geometry changes to the flow in a floor heating convector, 30th conference of Departments of Fluid Mechanics and Thermodynamics, Spindleruv Mlyn, Czech Republic, 2011
[4] F. P. Incropera, Introduction to Heat Transfer, 5th edition, John Wiley & Sons, 2007
[5] BOJKO M. N├ívody do cvi─ìen├¡ "Modelov├ín├¡ Proud─øn├¡" - FLUENT, V┼áB - Technical University of Ostrava, 2008,ISBN 978-80-248-1909- 9.