Statistical Variability of Soil Parameters within the Copper Belt Region of the Democratic Republic of the Congo

Authors: Stephan P. Barkhuizen, Deon Greyling, Ryan J. Miller

Abstract:

The accurate determination of the engineering parameters of soil is necessary for the design of geotechnical structures, such as Tailings Storage Facilities. The shear strength and saturated permeability of soil and tailings samples obtained from 14 sites located in the copper belt in the Democratic Republic of the Congo have been tested at six commercial soil laboratories in South Africa. This study compiles a database of the test results proved by the soil laboratories. The samples have been categorised into clay, silt, and sand, based on the Unified Soil Classification System, with tailings kept separate. The effective friction angle (Φ’) and cohesion (c’) were interpreted from the stress paths, in s’:t space, obtained from triaxial tests. The minimum, lower quartile, median, upper quartile, and maximum values for Φ’,c’, and saturated hydraulic conductivity (k) have been determined for the soil sample. The objective is to provide statistics of the measured values of the engineering properties for the Tailings Storage Facilities (TSFs) borrow material, foundation soils and tailings of this region.

Keywords: Democratic Republic of the Congo, laboratory test work, soil engineering parameter variation, tailings storage facilities.

References:

[1] Fourie, A. et al., 2022. 20ICSMGE State of the Art - Tailings.
[2] Van Langendonck, S. et al., 2013. Petrographic and mineralogical study of the sediment-hosted Cu-Co ore deposit at Kambove West in the central part of the Katanga Copperbelt (DRC). Geologica Belgica, Volume 16, pp. 91-104.
[3] Sillitoe, R. H., Perello, J., Creaser, R. A., Wilton, J., Wilson, A. J., Dawborn, T., 2017. Age of the Zambian Copperbelt. Mineralium Deposita.
[4] Huat, B., Toll, D. & Prasad, A. (2012). Handbook of Tropical Residual Soils Engineering.
[5] ASTM, 2018. D2487-17: Standard Practice for Classification of Soils for Engineering Purposes (Unified Soil Classification System). Conshohocken: ASTM International.
[6] Lade, P. V., 2016. Computations and Presentation of Test Results. In: Triaxial Testing of Soils. West Sussex, UK: Wiley Blackwell, pp. 11-98.
[7] Heymann, G., 2016. Typical strength properties of South African soils. Pretoria, South Africa, Proceedings of the first Southern African Geotechnical Conference - Jacobsz (Ed.).
[8] Castellanos, B. & Brandon, T., 2013. A Comparison Between the Shear Strength Measured with Direct Shear and Triaxial Devices on Undisturbed and Remolded Soils. Paris, Virginia Polytechnic Institute and State University, pp. 317 – 340.
[9] Atkinson, J.H. and Bransby, P.L. (1978). The Mechanics of Soils, McGraw-Hill, London.
[10] Vermeulen, N. (2022) ‘Evening Lecture Intro to Triaxial Testing & Feedback on Triaxial Survey’ (Recorded lecture), South African Institution of Civil Engineering (SAICE). 20 May. Available at: https:// https://www.youtube.com/watch?v=puMeHGvY1t0&list=LL&index=3 (Accessed: 22 March 2024).
[11] Skempton, A.W. (1954) The pore pressure coefficients A and B. Geotechnique, 4(4), 143–147.
[12] Lal, R., 2006. Encyclopedia of Soil Science. 2nd ed. Columbus: Taylor & Frances.