Investigating the Viability of Small-Scale Rapid Alloy Prototyping of Interstitial Free Steels

Authors: Talal S. Abdullah, Shahin Mehraban, Geraint Lodwig, Nicholas P. Lavery

Abstract:

The defining property of Interstitial Free (IF) steels is formability, comprehensively measured using the Lankford coefficient (r-value) on uniaxial tensile test data. The contributing factors supporting this feature are grain size, orientation, and elemental additions. The processes that effectively modulate these factors are the casting procedure, hot rolling, and heat treatment. An existing methodology is well-practised in the steel industry; however, large-scale production and experimentation consume significant proportions of time, money, and material. Introducing small-scale rapid alloy prototyping (RAP) as an alternative process would considerably reduce the drawbacks relative to standard practices. The aim is to finetune the existing fundamental procedures implemented in the industrial plant to adapt to the RAP route. IF material is remelted in the 80-gram coil induction melting (CIM) glovebox. To birth small grains, maximum deformation must be induced onto the cast material during the hot rolling process. The rolled strip must then satisfy the polycrystalline behaviour of the bulk material by displaying a resemblance in microstructure, hardness, and formability to that of the literature and actual plant steel. A successful outcome of this work is that small-scale RAP can achieve target compositions with similar microstructures and statistically consistent mechanical properties which complements and accelerates the development of novel steel grades.

Keywords: Interstitial free, miniaturized tensile specimen, plastic anisotropy, rapid alloy prototyping.

References:

[1] Rana R, Bleck W, Singh SB, Mohanty ON. Development of high strength interstitial free steel by copper precipitation hardening. Materials Letters. 2007; 61(14–15):2919–22. https://doi.org/10.1016/j.matlet.2006.10.037.
[2] Hoile S. Processing and properties of mild interstitial free steels. Materials Science and Technology. 2000; 16(10):1079–93. https://doi.org/10.1179/026708300101506902.
[3] Fekete JR, Strugala DC, Yao Z. Advanced sheet steels for automotive applications. JOM. 1992; 44(1):17–21. https://doi.org/10.1007/BF03222745.
[4] Hutchinson WB. Development and control of annealing textures in low-carbon steels. International Metals Reviews. 1984; 29(1):25–42. https://doi.org/10.1179/imtr.1984.29.1.25.
[5] Vanderschueren D, Yoshinaga N, Koyama K. Recrystallisation of Ti IF Steel Investigated with Electron Back-scattering Pattern (EBSP). ISIJ International. 1996; 36(8):1046–54. https://doi.org/10.2355/isijinternational.36.1046.
[6] Tsunoyama K. Metallurgy of Ultra-Low-C Interstitial-Free Sheet Steel for Automobile Applications. Physica Status Solidi (a). 1999; 167:427–33.
[7] Lavery NP, Mehraban S, Pleydell-Pearce C, Brown SGR, Jarvis DJ, Voice W, et al. Combinatorial development and high throughput materials characterisation of steels. Ironmaking and Steelmaking. 2015; 42(10):727–33. https://doi.org/10.1179/0301923315Z.000000000419.
[8] Farrugia D, Brown S, Lavery NP, Pleydell-Pearce C, Davis C. Rapid Alloy Prototyping for a range of strip related advanced steel grades. Procedia Manuf, vol. 50, Elsevier B.V.; 2020, p. 784–90. https://doi.org/10.1016/j.promfg.2020.08.141.
[9] Yar MA, Norrish C, Cullen JCT, Zhang L, Brown S, Underhill R, et al. Small-Scale Rapid Alloy Prototyping of Extra-Low Carbon Steel to Investigate the Effects of Cu and Cr Residuals. Minerals, Metals and Materials Series, Springer Science and Business Media Deutschland GmbH; 2022, p. 1202–13. https://doi.org/10.1007/978-3-030-92381-5_114.
[10] Zhang L, Harrison W, Yar MA, Brown SGR, Lavery NP. The development of miniature tensile specimens with non-standard aspect and slimness ratios for rapid alloy prototyping processes. Journal of Materials Research and Technology. 2021; 15:1830–43. https://doi.org/10.1016/j.jmrt.2021.09.029.
[11] Zhang L, Harrison W, Yar MA, Brown S, Lavery N. Influence of aspect ratio (AR) on the necking angle of tensile specimens for different alloys. 2nd International Workshop on Plasticity, 2021.
[12] Abdullah TS, Zhang L, Evans P, Lodwig G, Lavery NP. Scaling effects in miniaturised tensile testing on mechanical properties and plastic anisotropy r-values in Interstitial Free Steel 2023. https://doi.org/https://dx.doi.org/10.2139/ssrn.4399446.
[13] Zhang L, Harrison W, Yar MA, Mehraban S, Brown SGR, Lavery NP. Use of miniaturized tensile specimens to evaluate the ductility and formability of dual phased steels for Rapid Alloy Prototyping. Materials Science and Engineering: A. 2023; 875:145075. https://doi.org/10.1016/j.msea.2023.145075.
[14] Zhang L, Harrison W, Mehraban S, Brown SGR, Lavery NP. Size Effect on the Post-Necking Behaviour of Dual-Phase 800 Steel: Modelling and Experiment. Materials. 2023; 16(4):1458. https://doi.org/10.3390/ma16041458.
[15] BS EN 10346:2015 - TC. Continuously hot-dip coated steel flat products for cold forming. Technical delivery conditions. BSI; 2015.
[16] Kobayashi H. Microstructure Development in Ti Bearing Interstitial Free Steel with Simulated Hot Rolling Practice. ISIJ International. 1992; 32(7):873–81. https://doi.org/10.2355/isijinternational.32.873.
[17] Najafi-Zadeh A, Yue S, Jonas JJ. Influence of Hot Strip Rolling Parameters of Austenite Recrystallization in Interstitial Free Steels. ISIJ International. 1992; 32(2):213–21. https://doi.org/10.2355/isijinternational.32.213.
[18] Hwu YJ, Lenard JG. Phase Transformation Temperatures of an Ultra-Low Carbon Steel. 1998.
[19] BS EN ISO 6892-1. Metallic materials - Part 1: Method of test at ambient. BSI. British Standards; 2009. https://doi.org/10.3403/30395181.
[20] Lee K, Han J, Park J, Kim B, Ko D. Prediction and control of front-end curvature in hot finish rolling process. Advances in Mechanical Engineering. 2015; 7(11). https://doi.org/10.1177/1687814015615043.
[21] Clyne TW, Campbell JE, Burley M, Dean J. Profilometry‐Based Inverse Finite Element Method Indentation Plastometry. Advanced Engineering Materials. 2021; 23(9). https://doi.org/10.1002/adem.202100437.
[22] BS EN 10355:2013. Chemical analysis of ferrous materials — Inductively coupled plasma optical emission spectrometric analysis of unalloyed and low alloyed steels — Determination of Si, Mn, P, Cu, Ni, Cr, Mo and Sn, following dissolution with nitric and sulphuric acids, Routine method. 2013.
[23] Cheng YW, Tobler RL, Filla BJ, Coakley KJ. Constitutive Behavior Modeling of Steels Under Hot-Rolling Conditions. Boulder: 1999.
[24] Campbell JE, Zhang H, Burley M, Gee M, Fry AT, Dean J, et al. A Critical Appraisal of the Instrumented Indentation Technique and Profilometry‐Based Inverse Finite Element Method Indentation Plastometry for Obtaining Stress–Strain Curves. Advanced Engineering Materials. 2021; 23(5). https://doi.org/10.1002/adem.202001496.